What tools need to be configured in the high voltage distribution room?

The necessary tools and instruments in the power distribution room are in the high and low voltage power distribution room. Safety has always been the most concerned thing for people, and it is also the string that everyone should always tighten.

In the power distribution room, necessary safety operation tools must be equipped and preventive measures must be taken. Therefore, the tools required for the high-voltage distribution room are:

1. mousetrap rats often crawl on the distribution transformer in the substation power communication room, which poses a great threat to the safe operation of the power system. The main ways of harm: biting cable insulation material, or jumping into transformer, causing short circuit or even fire; When approaching the high-voltage line, electrical equipment will be broken down and burned due to strong magnetic field induction. Therefore, the mousetrap plays a key role in the power distribution room.

(2) The electroscope is an electrostatic instrument for detecting potential difference or charge, which is the key to the safe operation of the distribution room.

3. Insulating rubber sheet Insulating rubber sheet has the functions of shockproof, anti-skid and anti-collision, and is widely used in substations, power plants, power distribution rooms, test roommates and live working in the field.

(4) Hang signs in a conspicuous position at the entrance of the distribution room; Non-staff members are not allowed to enter; No smoking; Beware of electric shock; Wait for the warning signal.

⑤. Insulated carpets should be set in front of the switchboard in the distribution room with the same width, greater than 1 m and not less than 5mm in thickness to isolate static electricity, so as to avoid the loop current generated by workers walking back and forth and avoid harm to human body.

6. Insulating gloves and boots This tool is designed to facilitate the operation of operators, protect the safety of operators and personnel entering the distribution room, and avoid unnecessary electric shock accidents.

⑦. In the power distribution room of carbon dioxide fire extinguisher, short circuit and fire broke out due to line fault or other factors. This must be taken into account when equipping the transformer room with tools and equipment. Therefore, the fire extinguisher in the distribution room is the most important. Among them, carbon dioxide fire extinguishers are preferred, followed by dry powder fire extinguishers, and foam extinguisher is prohibited.

Today. A large number of insulation tools (including live working tools, safety tools, etc. ) Power supply system for safety tool cabinet. However, due to climate and other reasons, insulation tools and instruments are prone to be affected by moisture, and the insulation performance of insulation tools decreases after being affected by moisture, which seriously affects the life safety of maintenance personnel.