Responsibility book for safe production

Model essay on responsibility for safety in production (5 general articles)

In our ordinary daily life, there are more and more occasions where we need to use responsibility, and responsibility can make us fully aware of the importance of responsibility. Do you know the format of the responsibility book? The following is a model essay (5 articles in general) on the responsibility of safety production that I have carefully compiled, for reference only. Let's have a look.

Responsibility Letter for Work Safety 1

In order to conscientiously implement the Law on Work Safety and the policy of "Safety First, Prevention First, Comprehensive Treatment", comprehensively strengthen production management, further implement the responsibility system for work safety, establish and improve the standardized management system for work safety, strengthen the monitoring measures for major risks, establish and improve the emergency support system for first aid and mitigation, and ensure the full realization of the company's production and business objectives, In accordance with the principle of "whoever is in charge is responsible" and "graded management and graded responsibility", Hainan (Tanniu) Wenchang Chicken Co., Ltd. (hereinafter referred to as the joint-stock company) signed the "Responsibility Letter for Safety in Production" with the directors of its respective farms (factories), the specific contents of which are as follows:

1. Accident control indicators

1. Put an end to accidents with serious injuries or above;

2, put an end to major fire, burning and explosion accidents;

3. The canteen should do a good job of preservation, cleaning, anti-virus and disinfection, strengthen the management of food entrance, and put an end to food safety accidents such as food poisoning;

4. reduce the frequency of general accidents, and the frequency of general personal injuries and minor injuries shall not exceed 3 person-times, and no traffic accidents will occur in the production management area of this unit.

5. No major environmental pollution and toxic and harmful gas leakage accidents will occur, and efforts will be made to reduce pollutant emissions.

2. Work requirements for safety in production

1. Abide by the provisions of laws and regulations on safety in production, ensure safety in production, and assume the responsibility for safety in production according to law. Organize the formulation and implementation of the unit's rescue plan for production safety accidents, and report production safety accidents in a timely and truthful manner.

2. We should consciously study with relevant management personnel to improve the ability of safety production management and meet the requirements of relevant regulations.

3. Take the safety production performance as the work and important assessment content of the unit and the management personnel, implement the safety work assessment with clear rewards and punishments.

4. Put the work of safety in production on the important agenda, review the work plan of safety in production and carry out the specific implementation of the work plan of safety in production.

5. Understand and master the operation of safety production in this unit in time, supervise and implement the measures to solve major problems and hidden dangers of accidents in time, and ensure safety production.

6. Do a good job in inspection and maintenance of production equipment, safety equipment, fire-fighting facilities, protective equipment and first-aid appliances, and contact equipment maintenance personnel for maintenance when problems are found, so as to keep them in good condition and normal operation; Supervise and educate employees to use labor protection articles and appliances reasonably, use fire-fighting equipment correctly and update their work.

7. Make regular reports on safety production management, inspection and supervision, and rectification of potential accidents to the office of the leading group for safety production of the joint-stock company, and make special reports on major safety problems and put forward specific solutions.

8. Organize employees to carry out safety education and training to ensure that employees have the necessary knowledge of safety production, be familiar with relevant safety rules and regulations and safety operation procedures, and master the safety operation skills of this position. In the future, employees who have not passed the safety education and training and have not obtained the corresponding qualification shall not be allowed to work at their posts.

9. Special operators must receive special safety operation training in accordance with the relevant provisions of the state and obtain the qualification certificate for special operations before taking up their posts.

1. Review and implement the safety scheme of the construction project in time to ensure that the construction project and safety facilities are carried out simultaneously.

11. Prepare the emergency plan for major dangerous sources of this unit, organize disaster relief drills for the plan, and implement emergency rescue personnel.

12. popularize the advanced experience of work safety, and actively explore the ideas of work safety under the new situation, so as to make the work safety in our unit more scientific and effective.

III. Safety accident control

1. Employees of this unit must be organized to seriously study the Law on Safety in Production and relevant regulations on safety in production, strengthen management and avoid safety accidents.

2. When a major production safety accident occurs, the main person in charge of the unit shall immediately organize rescue, and shall not leave his post during the accident investigation and handling.

3. Report to the relevant departments in time and to the office of the leading group for safety production of the joint-stock company, protect the accident site, and seriously investigate and deal with the accident responsibility according to the principle of "four don't let go" (the cause of the accident is not found out, the person responsible for the accident is not dealt with seriously, the employees are not educated, and the preventive measures are not implemented).

4. Assist relevant departments in accident investigation and handling, support and cooperate with accident rescue, provide convenient conditions and maintain normal production.

IV. Report and assessment of safety work

1. In the monthly production analysis meeting organized by the joint-stock company, each field (factory) should take safety work as a report content; Report the quarterly work safety of the unit before 25th of the last month of each quarter (including the contents in the annex); Report the safety production performance report signed by the leader of the unit before December 25th of the year. The contents are as follows:

① the performance of leadership responsibilities;

② the operation of safety production and safety management system in this unit;

③ handling of hidden dangers or accidents;

④ existing problems and measures to be taken in the next step.

⑤ experience introduction and suggestions.

2. The safety production leading office of the joint-stock company will conduct performance evaluation according to the daily safety management status of the unit and the contents of the safety production performance report, which will serve as the basis for the assessment of the person in charge of the unit at the end of the year.

3. For the safety accidents caused by the dereliction of duty of the person in charge of the unit, the Office of the Leading Group for Work Safety of the joint-stock company will take administrative and economic penalties according to the measures for the administration of work safety of the joint-stock company, and deal with other relevant departments that meet the conditions for criminal proceedings.

V. Supplementary Provisions

1. This Responsibility Letter shall come into effect from the date when it is signed by both parties, and the execution period is from July 9, 2xx to December 31, 2xx.

2. This responsibility letter is made in duplicate, with each party holding one copy.

the first person in charge of production safety:

the responsibility letter for production safety on July 8th, 2xx. 2

In order to ensure the smooth production in the workshop and security team, and safeguard the personal safety of employees and property of enterprises, this responsibility letter is specially formulated according to the Factory's Standardization Manual for Production Safety and relevant rules and regulations for production safety.

1. The principle of "safety first, prevention first, full participation and comprehensive management" is adopted in enterprise safety production, and the principle that production and operation are subordinate to safety needs is adhered to, so as to ensure safe production and civilized production;

2. The safety work is carried out by the team under the leadership of the workshop leader. The team leader is the first person in charge of production in security team, responsible for production management and safety education in security team, organizing the implementation of the production responsibility system in security team, and implementing the enterprise safety production management system and procedures to ensure the smooth development of safety production work;

3. The workshop leader plans, arranges, checks, summarizes and compares the production tasks and safety work of the team at the same time;

4. The team earnestly carries out safety activities. Through activities such as team meetings and billboards, the team members are familiar with the safety management system of our factory, master the safety operation procedures, clarify the rights and obligations of employees in production safety, improve safety awareness and master the emergency handling methods of accidents;

5. The team shall regularly carry out safety inspection, discover and treat hidden dangers in production safety in time, and report to the workshop leaders.

6. put an end to the "three violations" phenomenon that the members of this team violate the rules of command, operating rules and labor discipline. Special equipment and special types of work need to hold relevant certificates;

7. Grasp the risk factors and occupational hazards in security team, and urge the team members to use labor protection articles correctly to prevent occupational hazards at work;

8. Carry out safety mutual check between teams and groups, do a good job in connecting production and safety work, and the team leader will disclose the safety matters of the team members;

9. In case of personal and equipment accidents, immediately report to the person in charge of the workshop and the factory level, and handle the accidents according to the principle of "four don't let go" under the leadership of the factory and the workshop;

1. The responsibility letter shall come into effect after being signed, valid for one year, and shall be assessed at the end of each year. The assessment shall be rewarded and punished according to the enterprise's Safety Production Reward and Punishment System, xx Electric Power Equipment Repair Factory Staff Performance Appraisal Method and the workshop assessment management system;

11. In case of the change of the person in charge, the handover work should be done in time and renewed, and the appraisal node is the handover time;

12. This responsibility book is made in duplicate, one for each workshop and team.

person in charge of the workshop: (signature)

Date: Responsibility Letter for Safe Production 3

1. Safety objectives

1. Implement the company's policy of "safety first, prevention first, comprehensive management", adhere to the principle that production and operation obey safety needs, and ensure safe production and civilized production.

2. There are no fatalities, serious injuries, fires and explosions, so as to ensure that the rate of industrial accidents in the whole year is lower than that in the previous year.

3. Maintain the company's harmony and stability, and ensure that no public security responsibility incidents occur in the company.

2. Safety responsibilities

4. The main person in charge of the company is the first person in charge of the company's safety production, and takes full responsibility for the company's safety production work. The main person in charge of the company conscientiously implements the national and municipal guidelines, policies, laws and regulations on safety production and labor protection, puts safety work on the important agenda of the company's management, presides over important safety production work meetings, issues major decisions on safety work, and examines and approves important safety rewards and punishments.

5. Establish and improve the guarantee system for safety production to ensure the implementation of funds for safety technical measures;

6. lead and support the supervision and inspection work of safety management personnel or departments;

7. Lead and organize the preparation of the annual and special period safety work implementation plan, be responsible for examining and approving the safety production responsibility system at all levels, and urge and inspect the main persons in charge of all units of the company to do a good job in safety production.

8. Improve the company's safety management organization, enrich full-time safety production management personnel, regularly listen to the work reports of safety production management departments, and study and solve major problems related to safety production in time.

9. Organize the examination and approval of the company's safety production rules and regulations, examine and approve the company's annual safety measures expenses as required, and supervise the effective implementation of its investment.

1. Organize the formulation and implementation of the company's emergency rescue plan, and establish and improve the company's emergency rescue system.

11. Organize the company's work conference on production safety on a regular basis, analyze the trends of production safety, and solve the problems existing in production safety in time.

12. Organize and lead the company's publicity and education work on safety production, and examine and approve the safety production assessment indicators of all levels and departments.

13. report the company's safety production status to the workers' congress.

III. This Responsibility Letter shall come into effect after being signed by both parties

The execution time is from January 1st, 2xx to December 31st, 2xx.

main person in charge: (signature)

Responsibility letter for safe production on xx, xx, XX, XX, XX. 4

This Responsibility Letter for Safe Production is specially formulated in order to clarify the responsibilities of safe production, earnestly implement the requirements of the government and the company for safe production, and ensure the safe production and normal operation of the enterprise.

1. The main administrative person in charge of each unit is the first person in charge of production safety in this unit, and takes overall leadership responsibility for production safety (including traffic safety) in this unit and its subordinate departments.

second, carry out the party and government's guidelines and policies on safety in production, and supervise and manage according to the responsibilities stipulated by laws and regulations and the requirements of the responsibility system for safety in production, so as to prevent and reduce production safety accidents, ensure the safety of people's lives and property, and protect the legitimate rights and interests of employees.

3. Put the work of safety in production in an important position in the operation and service of the unit, hold regular meetings on safety in production, study preventive measures, formulate feasible early warning schemes, and solve all kinds of problems in safety in production in time; Form meeting minutes at each meeting and do a good job of account registration.

iv. decompose the safety production work of this unit step by step according to the requirements of the responsibility system, implement it to all relevant departments and employees, and regularly check and supervise the implementation of the responsibility system for safety production, so as to nip all kinds of accidents in the bud.

5. establish and improve the safety production responsibility system and organizational management network of the unit, set up and implement the leading group for safety production management, and equip part-time safety production management personnel.

VI. Take various forms to strengthen the publicity and education of laws, regulations and safety knowledge on production safety, and improve the safety awareness of employees.

VII. Strictly implement the operating rules for production safety:

(1) Formulate and strictly implement the work regulations for production safety.

(2) It is strictly forbidden to use fire, electricity and gas in violation of regulations, and strictly manage inflammable, explosive, toxic and other dangerous goods.

(3) Ensure the normal operation of the fire-fighting equipment system, implement the fire-fighting responsibility system, and achieve the organic combination of civil air defense and machine defense.

(4) Strengthen traffic safety education, strictly abide by traffic safety laws and regulations, and ensure safe operation.

(5) Strengthen public security, ensure the safety of internal articles and managed properties of the unit, and prevent all kinds of public security cases and accidents.

(6) Employees of boilers, elevators, mechanical processing equipment, etc. must hold relevant certificates, strengthen pre-job training and retraining of on-the-job personnel, and do a good job in daily maintenance and maintenance of the equipment.

VIII. Care about employees' interests, solve employees' practical difficulties, and improve employees' working environment and rest conditions.

IX. Each unit shall report its work safety to the safety production leading group of the head office every month. According to the content requirements and time requirements, the Safety Production Work Duty Report shall be filled out strictly and carefully every six months, and signed by the chief executive before June 3th and December 3th every year, and then reported to the head office.

X. In case of major casualty accidents or major safety accidents during the assessment period, the company will impose economic penalties and administrative sanctions on those responsible for production safety; The company will reward those who conscientiously implement various measures for safety in production and have no major accidents.

Xi. The letter of responsibility shall come into effect after being signed, with a validity period of two years, and shall be assessed at the end of each year.

XII. In case of the change of the responsible person, all units shall timely adjust and make good work handover, and the responsibility letter shall remain valid.

Person in charge:

Date: Responsibility Letter for Safety in Production 5

As employees of Jiulong Logistics Development Co., Ltd., we have the responsibility to ensure the safety of the company's production without any safety accidents. Have the responsibility to ensure the safety of equipment, so that the state and investors entrusted with our management are not affected.