How to close the window when the car is turned off

The method of closing the window after the car is turned off;

1. Close the window remotely with the remote control key, and press and hold the lock key on the remote control;

2. Press and hold the button for about 5 seconds, and the window will basically close automatically. If there is no automatic window raising function, the window cannot be closed after the flameout, and the window can only be closed by re-ignition.

There are two kinds of automobile window lifting control switches equipped with one-button lifting window. The first one is to press and hold it gently like an ordinary electric window, and the second one is to press and release the window, and the window will automatically open or close completely.

One-button window lifting system is a set of window lifting circuit control system installed on the car. After flameout, in principle, a locked car can automatically flameout, mainly depending on the circuit installation.

One-key window lifting means that when the driving computer receives the window lifting key that is shorter than the set opening time (generally, it immediately lifts and releases the window lifting switch), it will send a continuous window lifting instruction to the window motor until the window motor is completely closed.

If the window up switch is lifted or pressed again during the window up process, the window up action will stop.

If the lifting switch is lifted all the time, and the time is longer than the set time of one-button window lifting, the window will continue to rise, but after the lifting switch is released, the window will stop rising immediately.

However, one-button window lifting must be used in conjunction with the window anti-pinch function, otherwise it will be easily pinched, because the window lifting force of the motor is still very large, which is why many models have one-button window lowering function but not one-button window lifting function.

If there is anti-pinch function, there is an additional motor current monitoring and control circuit. If it is found that the motor current increases beyond a certain range, it is considered that the motor is overloaded due to the increase of foreign body interference in the window and the motor should be stopped. Million car purchase subsidy