What are the safe and civilized construction management measures?

Safe and civilized construction management measures are as follows:

1. Supervise contractors to establish on-site civilized construction leading groups. Put civilized construction site management work on the agenda of project management.

2. Set up obvious signs at the construction site. Indicate the name of the project, owner, supervision unit, design unit, contractor and construction project manager, start and completion date, construction permit approval number, etc. The contractor is responsible for the protection of signage at the construction site.

3. The main management personnel of the construction site should wear ID cards to prove their identity at the construction site. Safety production slogans, safety color codes or posters should be hung at the entrance to the construction site and in hazardous operating areas to remind employees to pay attention to production safety at any time.

4. Check whether there are targeted civilized construction guarantee measures in the construction plan, comply with the safety production systems of relevant national and local governments, strengthen the plane management of the construction site, and establish a good standard of safe production and civilized construction. production order.

5. Carry out civilized construction education, wear labor protection clothing, and work with certificates. Comply with various safety production management systems.

6. All employees participating in construction must undergo entrance safety education, post safe operation technical education and civilized construction education. Resolutely stop illegal command and illegal operations.

7. Put the responsibility for civilized construction on people. It is recommended that the project production manager take charge of civilized construction. Construction workers are responsible for specific civilized construction management work so that they can conscientiously implement the safe and civilized construction guarantee measures in the construction organization design when organizing production. And there is a reward and punishment system.

8. At the weekly supervision meeting, civilized construction should be discussed as a special item.

9. Once problems are discovered, measures must be taken to correct them to avoid recurrence. No matter which level, which department or which person is involved, we will never tolerate it and must rectify and implement it. And be punished according to relevant regulations according to the severity of the case; if the performance is outstanding, rewards will be given according to the reward and punishment methods.

10. Strengthen the management of the general construction layout plan. The construction organization design or construction design plan must have an accurate construction floor plan and submit it to the supervision company for approval. If the general layout of the construction needs to be changed due to project needs, an application must be submitted to the supervision company and the owner first, and approval can only be implemented before implementation.

11. Strengthen the stacking management of materials, semi-finished products and machinery. Bulk materials, semi-finished products, machinery and equipment shall be stacked according to the general construction layout plan, and shall not encroach on on-site roads, safety protection and other facilities.

The materials department must ensure the timely supply of materials and process equipment required for safety technical measures, and ensure that the purchased safety nets, safety helmets, seat belts and other labor protection supplies and appliances meet safety technology and quality standards. Materials must be managed carefully, used in strict quantities, and bulk materials must be recycled in a timely manner. Materials are stacked neatly with a cover underneath.

12. Strengthen the management of construction machinery. Construction machinery shall be set up in accordance with the locations and routes specified in the general construction layout plan, and shall not arbitrarily encroach on the roads within the site.

Construction machinery must undergo safety inspections before entering the site. Only those that pass the inspection can be used. Construction machinery operators must establish a unit responsibility system and work with certificates in accordance with relevant regulations. Unlicensed personnel are prohibited from operating. Construction machinery should be neatly arranged, the machine body should be kept tidy, the markings and numbers should be clear, the safety devices should be sensitive and effective, the inside and outside of the machine shed should be clean and easy to operate, the mixing station should be listed for mixing, and should be cleaned after the day.

The equipment management department must regularly inspect, repair, and maintain electromechanical equipment to keep the equipment in good technical condition. It is strictly forbidden to operate electromechanical facilities with diseases. Ensure that safety protection devices are complete, sensitive, effective and reliable. Machinery operators should be trained and certified to work.

Extended information:

Construction inspection methods:

Including: routine inspection, special inspection, joint inspection

1. Routine inspection Inspection: refers to the daily inspection organized by the project manager or the regular spot inspection organized by the construction enterprise. The supervision engineer should participate in such self-inspection activities, review and sign the activity records, and supervise rectification.

2. Special inspection: Follow the civilized construction management documents issued by the Municipal Construction Committee, such as mud and soil excavation and sanitation and epidemic prevention. Inspections on management materials, publicity and education, etc., as well as special inspections carried out according to relevant documents of superior departments or inspections on key projects and locations.

3. Joint inspection: refers to the inspection carried out by the supervision team in three stages during the construction process (i.e. foundation, main structure and three stages before project completion) in accordance with the "Construction Safety Inspection Standards". The scoring results are signed by the project manager or the on-site person in charge of the construction company and the person in charge of the supervision company, and serve as the main basis for assessing the construction safety level after the project is completed.

Reference materials:

Baidu Encyclopedia—Construction