Annual Work Summary of State-owned Enterprises' Work Safety

Annual Work Summary of State-owned Enterprises' Work Safety (5 general articles)

Time flies, and a period of work activities has come to an end. Looking back on the work achievements since this time, what do you think? It's time to write a work summary and analyze the work in the past. But I found that I didn't know what to write. The following is a summary of the annual work of state-owned enterprises' safety production (5 general articles). Welcome to read it. I hope you will like it.

annual work summary of state-owned enterprises' safety production 1

Safety production is a major event related to people's property and personal safety, and it is the top priority of all work. Our institute conscientiously implemented the spirit of the company's and the management office's documents on safety production, and unified thinking, raised awareness, strengthened management and paid close attention to implementation. There was no major casualty accident, minor injury accident and equipment safety accident throughout the year, and all the safety production objectives and tasks were successfully completed. Next, I will report to the leaders on the situation of production safety in xx years and arrange the work of production safety in xx years.

1. Work safety management

(1) Adjust the management organization and implement the post responsibilities

1. Further improve the safety management organization. Due to personnel changes, we adjusted the safety production leading group, set up the safety production inspection group and the publicity group, further clarified the responsible department for safety production, and provided a guarantee for the implementation of safety production work.

2. At the beginning of this year, the company, the management office and our office signed the responsibility book for safety in production, and the toll office signed the responsibility book for safety in production for xx years with various teams, shuttle buses, canteens and electricians, so as to implement the responsibility system for safety in production layer by layer, so that the responsibilities can be implemented, and the responsibilities can be assigned to people, and the responsible persons of various departments can be clearly defined.

(II) Improve the safety system and standardize the inspection mechanism

1. Our institute has established and improved the safety production system according to the spirit of the relevant safety production documents of the company and the management office and the actual situation of our institute. A series of safety production systems including safety production information feedback, confidentiality management, toll crossing safety management, vehicle management, canteen management, internal security, power distribution room safety management, etc. have been formulated; A series of safety operation procedures, such as driver's job responsibilities, electrician operation, safe technical operation of generator, safe operation of power distribution cabinet, etc. A series of safety production plans such as traffic control, fire fighting, anti-theft and anti-robbery rescue, bad weather, anti-typhoon and flood control, canteen safety management and anti-poisoning, power supply guarantee, etc. Starting from multi-angles, multi-directions and nuances, strictly implement the safety system and put an end to all potential safety hazards.

2. strengthen the daily inspection of production safety and adhere to the policy of "production safety, prevention first". Electricians check the equipment every day, and the safety production inspection team conducts a major inspection once a month, including charging equipment, fire fighting equipment, canteens and other aspects related to safety production. During the inspection, * * * found that the main power distribution room is small and unventilated, and grass is spread around it, which is dangerous in rainy days; Fire fighting equipment needs to be maintained or replaced; The anti-theft performance of monitoring room is poor; Transformer and low-voltage chamber can't dissipate heat, and report it in time for timely rectification. From all aspects, it has effectively maintained the good order of our institute, and comprehensively and systematically guaranteed the safe production of toll stations and employees.

3. Every day, the administrative shift personnel are responsible for closing the doors and windows of the management room, doing a good job of anti-theft and keeping a log on duty; Security guards should strengthen the frequency and scope of patrols, find and stop unidentified personnel from entering the toll booth in time, dissuade vehicles that stop at the toll plaza during the morning shift, keep a security log, and the monitor on duty will supervise the security guards' duty.

(3) Strengthen publicity and education, and establish the concept of safety

1. In order to cultivate good habits of observing safety discipline, our institute understands the importance of safe production ideologically, and is not careless when going to work, strictly putting safety first and prevention first. Hold a regular meeting on production safety at least once a month, and make use of the office meeting and team meeting to carry out knowledge study on production safety, proceed from reality, distinguish different situations, carry out study and education on production safety in a focused and hierarchical manner, and focus on road traffic, fire and explosion, electricity safety, chemicals, canteen anti-virus and other aspects related to safety, so as to firmly establish the idea of "safety first".

2. Make use of publicity columns and banners to publicize the common sense of safety production and safety production laws and regulations. In this year's safety production month, under the personal leadership of the director, all the staff of our institute publicized the New Road Traffic Safety Law to the drivers and passengers, and distributed more than 1, leaflets on "Implementing the Safety Production Law and Keeping Everyone Safe in Everything", which was widely praised by the drivers and friends. Hold a safety production knowledge contest in the whole institute; Publish a special issue of safety production month entitled "Make concerted efforts, scientifically manage, guard against arrogance and rashness, and put an end to accidents". In the campaign to crack down on fake driving licenses that started in October, our toll collectors took the initiative and confiscated 4 fake licenses. In the national rectification of overloading and overloading of vehicles, our institute hung two large banners and actively assisted the traffic police and road administration departments to carry out vehicle inspection, effectively eliminating the potential safety hazards of overloading and overloading vehicles.

2. Shortcomings and problems

1. The safety awareness of individual employees needs to be improved. During several safety production inspections, it was found that the lights and air conditioners were still on in the booth where people were absent during the day, and the doors of individual toll collectors were not locked.

2. The form of safety publicity and education is single, and the publicity team should enrich the form of safety production publicity and increase publicity.

3. The problem of spreading grass on the ground of the power distribution room has not been solved.

Third, the main measures of safety production

1. Strengthen the study of safety production, enrich the forms of publicity, and further improve the safety awareness and sense of responsibility of employees.

2. Further improve the safety production protection skills of employees, and plan to organize a study on emergency rescue, emergency treatment of power failure and chemical prevention.

3. Continue to strengthen the inspection of production safety, and eliminate the dead corners and hidden dangers.

4. Strengthen cash management, strengthen employees' safety awareness, and put an end to all liability accidents. Persistence is the most important work in production safety, and prevention is the most important. Our employees go up and down Qi Xin to attract attention, carry out responsibilities and put an end to hidden dangers. In the future work, we will pay more attention to the safety and security work, solve the new problems found in safety production in time, continuously improve the safety production level of our institute, and achieve the goal of no safety accidents in xx. Annual summary of work safety in state-owned enterprises in 2xx, under the leadership of county health bureau and town government, the work safety in our hospital always adheres to the policy of "safety first, prevention first", starting with raising awareness, strengthening leadership, perfecting system, strengthening management, carrying out in-depth safety inspection, and actively eliminating hidden dangers of accidents. Through the concerted efforts of all employees in the hospital, no unsafe accident occurred.

The specific practices of our hospital in safety production are as follows:

1. Strengthening leadership and improving organization are the basis of safety production management.

Our hospital has established a safety production work leading group with the dean as the team leader, the dean in charge as the deputy team leader, and the members of the hospital committee and the heads of various departments as members. The 24-hour duty system has been strengthened, and a safety production management system has been formed from horizontal to vertical, so that the safety management work is not divorced from the organization.

Second, formulate relevant safety production management systems to standardize and standardize safety work

In order to ensure our hospital's safety production and improve the quality of medical services, combined with the actual characteristics of our hospital's safety work, we have formulated the Medical Accident Prevention and Treatment Plan and the Emergency Plan for Public Health Emergencies, and established the Medical Quality Management Committee, the Nursing Quality Management Committee, the Pharmaceutical Affairs Management Committee and the Infection Management Committee. Using the system to manage people not only educates everyone, but also effectively promotes the consciousness of employees to obey the rules and discipline. In terms of production and life, each department issues a self-inspection registration form for potential safety hazards, which is checked once a month. When problems are found, they are eliminated in time, and unsafe accidents are eliminated in the bud.

Third, strengthening publicity and training and enhancing safety awareness is the basis for doing a good job in safety production in our hospital.

Since this year, our hospital has made full use of staff meetings, village doctors' regular meetings and other forms to carry out safety education for employees in our hospital, learn relevant safety production regulations and rules and regulations of our hospital, so that they can have a new improvement in their ideological understanding and effectively enhance safety awareness.

In short, our hospital has done a good job in safety production this year. In the future, our hospital will conscientiously sum up experience. In the new year, under the guidance of the Party's principles and policies, our hospital will conscientiously carry forward its achievements, correct shortcomings, blaze new trails, keep pace with the times, further implement the responsibility system for safety production, do a good job in safety production, create a good and safe medical environment, and make greater contributions to building a harmonious society in an all-round way. The annual work summary of state-owned enterprises' safety production 3

further improved the safety awareness of all employees, promoted the construction of the company's safety culture and laid a solid foundation for the next step of safety production. The activities of this year's "Safe Production Month" are summarized as follows:

1. Leaders attach great importance to it and make careful arrangements

In order to ensure the effective implementation of all the activities of this "Safe Production Month" and make the activities effective, the company attaches great importance to it. On May 24th, the company held a mobilization meeting for the "Safe Production Month" activities, at which the company established the manager as the team leader and the deputy manager in charge of safety as the deputy team leader. The production department, equipment and energy department, safety and environmental protection department and other departments are members of the "Safety Production Month" activity leading group, which is responsible for organizing, supervising, inspecting and coordinating the whole process of the "Safety Production Month" activity, formulating the activity content, scheme and activity schedule, and organizing and carrying out the "Safety Production Month" activity in an organized, led and orderly manner.

At the same time, the leaders of the company put forward specific work requirements and arrangements for the 2xx "Safety Month", requiring the heads of workshops and departments to mobilize all cadres and workers, actively participate in various "Safety Month" activities organized by the company, and strive to improve the safety production awareness and safety operation level of all employees in the company. In addition, all workshops are required to organize employees to hold safety month mobilization meetings one after another, and set up their own leading groups for "Safety Month" activities, so as to work out the activities content and implementation plan according to the actual safety production in workshops, so as to ensure the effective development of "Safety Month" activities.

2. Make extensive publicity and pay attention to practical results

In order to do a good job in the publicity of "Safe Production Month" activities, the company actively collected and sorted out the information of various safe production month activities in May, and distributed them to workshops for publicity and learning in time. At the same time, the theme of "Safe Production Month" activities and related publicity slogans were made into four publicity banners, which were hung on the company's organic tin base and inorganic tin base respectively on May 3.

On June 1st, the company organized employees to learn General Manager Gao's safety speech, and on June 7th, it organized a blackboard newspaper competition with the theme of Safety Month, which was attended by four workshops and quality supervision departments of the company. The blackboard newspaper competition had a distinct theme, novel layout, various forms and rich contents, and widely publicized the laws and regulations, policies and company management systems of the party and the state on safety production, as well as technical knowledge on safety production, and promoted all employees to firmly establish "scientific development and quality supervision".

Third, actively carry out safety knowledge education and training activities to continuously improve the safety quality of employees

In mid-June, the Safety and Environmental Protection Department will take the lead in organizing safety knowledge education and training for employees in the whole company at different levels:

First, by organizing the company's management personnel to learn the training and study on safety production laws, regulations, principles and policies, the management personnel will firmly establish the concept of scientific development and safety development, improve their consciousness of performing safety management duties, and do a good job in safety production according to law, rules and regulations.

the second is to organize safety training and warning education for employees on the company's safety management rules and regulations, post safety operation skills, case analysis of safety production accidents and on-site emergency response plans, so that employees can master post safety skills and self-help and mutual rescue measures skillfully.

thirdly, the human resources department will take the lead in cleaning, filing, education, training and management of special types of workers and special operators, so as to ensure that all special workers are certified. Fourth, organize activities such as safety knowledge examination and protective clothing, air respirator wearing competition and boiler post knowledge competition, which further improve the safety quality of all employees.

IV. Organize accident drills to improve the risk prevention awareness and emergency rescue ability of all employees

In order to strengthen the emergency handling of hazardous chemicals emergencies and the self-help and mutual rescue ability of employees, during the "Safety Month" activities, the workshops of the company selectively carried out various accident rescue drills, which improved the accident prevention awareness and accident rescue and disposal ability of employees, improved the effectiveness and operability of emergency plans, and further improved the company's accident early warning and handling.

on June 18th, the workshop successfully organized 21 employees to carry out emergency rescue drills for chlorine leakage. Through the drills, the emergency rescue plan for hazardous chemicals of the company was actually operated, which further improved the alarm and early emergency handling abilities of all employees and exercised the actual combat ability of the emergency rescue team. In addition, the workshop also held a competition on wearing protective clothing and air respirator from June 25th to 29th. The competition included wearing protective clothing, wearing air respirator and inflating the empty exhalation bottle with a compressor, which further improved the emergency rescue ability of employees.

v. Carry out actions to investigate and manage potential safety hazards and implement the responsibility system for production safety

During the activities, the company organized and carried out weekly special safety inspections in combination with the safety requirements of "checking and correcting violations" and "three actions and three constructions". Organize special inspection of occupational health and safety from June 4 to 5, focusing on inspection of occupational health, working site environment and employees' labor protection wear; From June 14th to 15th, the Equipment and Energy Department took the lead in organizing equipment safety inspection and electrical safety inspection, mainly from the aspects of "boiler, container, pipe and special equipment", electromechanical equipment, power distribution room site and management. On June 18th, a comprehensive safety inspection and evaluation was organized in the third quarter, mainly from the implementation of safety responsibility system, site management, management of hazardous chemicals and major hazard sources, fire safety and other related management regulations or standards. * * * More than 3 potential safety hazards were found, and 5 violations of regulations and rules were investigated. All workshop departments carefully analyzed the existing problems, actively rectified them in strict accordance with the principle of "three decisions and four no pushes", and further strengthened the management of equipment and facilities package mechanism to strengthen safety.

VI. Carry out the safety rationalization proposal activity of "I offer a policy for safety"

During the safety month activity, the company also organized the safety rationalization proposal activity of "I offer a policy for safety", requiring all departments and workshops to mobilize all employees to actively participate in the safety rationalization proposal activity, give full play to the innovation ability of the employees, and improve the safety rationalization proposal activity from the aspects of system management and operation.