Inspector slogan

In real life or work and study, everyone has slogans that impress them. Through slogans, people can enhance their sense of social responsibility. Do you know what makes a good slogan? The following are the inspector slogans I compiled for reference only. Everyone is welcome to read them. Inspector’s slogan 1

On-site inspection: You can’t give me the love I want

I can’t arouse that brilliant spark like this

What I need You never consider the temperature for me

I always look forward to you putting on that coat for me so that I can have a little bit of warmth in this biting cold wind, but you let me do it again and again It breaks my heart

I always hope that you can spare some time to dress me up, but you always say: too busy, too busy

In fact, what I need Not much, I just hope to have a strong and reliable protection, but you still can't give me the inspector's slogan 2

1. Quality inspection is carried out strictly, and excellent quality is guaranteed.

2. Quality is the partner of success, and inspection is the guarantee of quality.

3. One person is negligent and hundreds of people are busy, so the inspection will be smoother.

4. If you want products to have zero defects, inspection is inevitable.

5. Be careful, meticulous, and attentive. Only when the testing is done well can you ensure satisfactory quality.

6. If the testing standards can be followed, there is no need to worry about quality and efficiency.

7. Think rigorously, operate strictly, inspect strictly, and verify seriously.

8. A slight difference separates the good from the bad.

9. With eyes, hands and heart, the detection link is indispensable

10. The original records must be reliable, so that the detection and analysis can be effective.

11. Pay more attention and have fewer problems.

Medical Laboratory Leaflet

Medical Laboratory Association

Society Introduction: Our society’s full name is: "Taizhou University Medical Laboratory Association", which was officially established in 2010 April 1st. The main purpose of the establishment of the club is to popularize medical laboratory knowledge, provide students with laboratory knowledge exchange and laboratory skills, and provide a platform for self-expression, training and growth. We also want to better serve medical school students and increase our medical knowledge and skills to fully and effectively prepare for future employment.

Community spirit: Our highest spirit is sincerity, love and truth-seeking. "Pursuing" means having the determination to overcome difficulties without fear, and "practicing" means seeking truth from facts regarding test results. Our slogan is: choice - just to determine the direction; hard work - just to realize the dream! You can go as far as your thoughts go; surpass yourself and challenge your limits.

The purpose of the association: To be community-based - always "testing skills and social practice to gain recognition from members and society" is the foundation for the survival and development of the association; practice is the most valuable - testing skills is valuable in practice , practice comes from social practice, and the implementation of correct inspection methods has value; people-centered - caring about the happiness of the people, caring about the maturity of members' skills, actively promoting the development of the community, and allowing the inspection association to have a good future.

Club activities: We will hold various activities such as: lectures, creating unique inspection competitions, organizing skills competitions, organizing members to participate in social practice, member training, organizing basic knowledge of experimental inspections, application of inspection instruments, Test skills, hospital internship, etc. In our free time on weekends, we can also organize group travel for members. The experience exchange meeting takes the form of a talk meeting to exchange experiences. Everyone discusses the development of the club and the organization of activities and expresses their opinions. Through these activities, members can improve their professional skills and become proficient in skill operations, lay a solid foundation for work, and enrich Classmate life. Club Department: Instructors: Chen Jiayu, Yao Jun, Zhang Yu

Secretary Department: Understand members’ suggestions for the club and inform functional departments of specific activities and the progress of their functions. External Relations Department: Responsible for contacting the community with the outside world and raising funds for community activities.

Finance Department: Responsible for managing club funds and strictly supervising the use of funds by various departments.

Planning Department: Responsible for the planning of club activities and improving the implementation of activities.

Organization Department: Responsible for the specific matters of the activity (personnel arrangements, rewards and punishments) and membership status.

Propaganda Department: Responsible for promoting the activities of the society and maintaining the image of the society.

Learning Department: Skills Training Group, responsible for the guidance and training of professional skills

Students who are interested in medical knowledge can join our Medical Examination Association, and we will organize blood tests later , blood pressure measurement and other basic medical knowledge training, medical students will also apply for a laboratory to learn medical knowledge through a learning method that combines physical objects with book knowledge. Interested students are looking forward to your joining.

Recruitment Target: Freshman Recruitment Location: In front of the teaching building

Recruitment Time: October 11, 2015 Recruitment Hotline: Yu 612615

QC Inspector Basic Knowledge Exam Paper (with answers)

QC Inspector Basic Knowledge Exam Paper

Name and Job Number Score

One fill-in-the-blank question (each blank 1 point, ***30 points).

1. The main causes of quality fluctuations include:

2. The three-inspection system refers to: self-inspection, mutual inspection and special inspection.

3. The X-R diagram is also called and can be divided into 2 parts.

4.GB/T2828.1: 2003 and.

5. The team slogan of our quality department team is:

6. The team requirements of our quality department team are:,,.

7. The treatment methods for non-conforming products generally include: rework, repair, downgrade, and scrap.

8.6S includes organizing, rectifying, sweeping, cleaning, habits, and safety (saving).

Two true-false questions (mark “√” for the correct answer, “×” for the wrong answer, 1 point for each question, ***10 points).

1. The processes exist independently. (×)

2. All indicators of the product meet the standards and must meet user needs. (×)

3. Quality inspection has nothing to do with production workers. (×)

4. Measuring instruments in use must have certificates of conformity and be within the validity period. (√)

5. Product quality is determined not only by design and manufacturing, but also by inspection. (√)

6.SPC can be applied to all aspects of enterprise management. (√)

7. After the unqualified finished products are selected, there is no need for further inspection. (×)

Three-indefinite multiple-choice question (at least one answer is correct, ***10 points)

1. Product classification includes (ABCD)

A Hardware B Software C Process materials D Services

2. According to the product realization process, quality inspection is divided into (ABD)

A Incoming material inspection B Process inspection C Sampling Inspection D Final Inspection

3. PDCA is the basic process of quality improvement, and the specific order of implementation is (D).

A. Plan, inspect, implement, and dispose B. Inspect, plan, implement, and dispose

C. Inspection, implementation, disposal, plan D. Plan, implementation, inspection, disposal

Obtained: X=18.036, δ=0.086,

UCL= (F) LCL= (B ) Median = (D) Minimum value = (E)

A18.036mmB17.778mmC0D18.02mmE17.89mmF18.293mm

5. What is usually called H of 5W1H (D).

A person B machine C environment D method

6. Preventive measures emphasize (C).

A. Eliminate potential causes of nonconformity B. Analyze the causes of problems that have occurred

C. To prevent the recurrence of non-conformities D. To prevent the recurrence of undesirable situations

7. There is a point sampling inspection plan of (13, 21), and the rule for judging whether a batch is qualified is: randomly select 13 units from the batch Products, if d≤21

pieces (C), the batch of products will be deemed qualified.

A. Number of defective products B. Number of defective products per unit

C. Number of unqualified units D. Number of unqualified units per 100 units

8. Under what circumstances does the control chart need to be reformulated? (BCDE).

A. The idea goes out of bounds B. The environment changes C. Changes in personnel and equipment D. Change process parameters or adopt new processes

E. Change suppliers or replace raw materials and parts

Four short answer questions (5 points each, ***20 points).

1. What are the seven tools of quality?

Answer: Check the surface classification histogram, Platonic fishbone chart, scatter chart and control chart.

2. Briefly explain the meaning of the following content "AQL=0.65, IL=G-Ⅱ, 80 (1, 2)" (GB/T2828.1).

Answer: The worst acceptance quality of the inspection batch is 0.65. The inspection level is general inspection level 2, the sampling number is 80, the acceptance number is 1, the rejection number is 2, and there are 80 inspection items (differences between piece counting and point counting). If 2 are unqualified, the inspection batch will not be accepted.

3. What are the two categories of judgment criteria for control charts?

Answer: (1) If the idea goes out of bounds, it will be judged differently.

(2) The ideas are different even if they are not randomly distributed.

4. Briefly talk about the work discipline of the quality department?

Answer:

Five comprehensive application questions (10 points)

1. The inspector inspected 2,500 products in a certain workshop and found the following defective products: 8 products with flash edges, 6 products with injection molding deformation, 10 products with missing material, 2 products with black spots, 4 products with color difference, and 4 products with blisters. So what is the qualification rate of this batch of products (expressed in PPM)? And assisted the engineers to make this batch of products.

Answer: Pass rate = 1-(8 6 10 2 4 4)/2500*106=986400ppm

Six test questions

1. Put it in at one time One marble, how many marbles can be placed in a large empty bag?

I wonder if 011015 is empty after adding one

2. Which number is the most diligent?

02468 I don’t know

3. Which number is the laziest?

13579 Don’t know

4. Please select the missing number: 2, 5, 8, 11, ()?

1016121314 I don’t know that the difference is all in the order of 3

5. The workers dug a big hole in the front yard, four meters long, three meters wide and three meters deep. So what is inside? How many cubic meters of soil? 0 Since it is a hole, there is no soil

6. In which month do Americans usually eat the least?

1234567891011122 Minimum days in a month

7. Please select the missing number?

2, 5, 7

4, 7, 5

3, 6, () the average of the two rows of data above

8. A pair of guinea pigs give birth to a pair of guinea pigs every two months. How many guinea pigs can one guinea pig give birth to every four months? One cannot give birth

9. "May 1st" is Monday. What day of the week is "October 1st" of the same year? Day

Inspector's job responsibilities

1. Inspection personnel should systematically master the inspection methods and standards based on the inspection, and understand the inspection process

2. Make all preparations for the inspection (including instruments, equipment, reagents, drugs, specimens, etc.), and ensure that the inspection requirements are met.

3. Strengthen the management of the precision and valuable instruments used, check them frequently, keep records of the precision and valuable instruments, and clarify the responsibilities. , the functions, characteristics and operation methods of the equipment, you must have knowledge of maintenance and repair, and be able to perform simple repairs. Those who damage the equipment due to violation of operating procedures should be dealt with appropriately.

4. Comply with laboratory regulations. , go to get off work and get off work on time, stick to their posts when working, and cooperate with supervisors to strengthen safety management of the laboratory

5. Laboratory personnel must frequently clean and maintain the laboratory environment, and the instruments and equipment used. Medicines should be washed and wiped frequently, so that the windows are clear and clean, the countertops are neat, orderly, clearly marked, and easy to use.

6. Strengthen the management of equipment and equipment to ensure that accounts, cards, and items are consistent, such as If there is damage or loss, it must be reported to the supervisor for investigation and treatment. For instruments, equipment and expired drugs that have exceeded the specified service life and are seriously damaged beyond repair, the laboratory will report them uniformly and handle them properly after approval. No one is allowed to dismantle or remove them without authorization.

7. Inspection personnel must strictly control the use of various drugs in experiments in a spirit of economy, and must not waste them at will. Damaged instruments will be dealt with on a case-by-case basis.

8. The inspection personnel must fill in the receipt form for the commonly used instruments and medicines, and collect them in the warehouse after being signed by the superior supervisor. The receipt of precision and expensive instruments must be signed by the supervisor and the general manager. No one is allowed to transfer any items in the laboratory. Transferring equipment and drugs to other departments of the company must be approved by the supervisor, and the borrowing procedures must be completed with the approval of the general manager.

9. Strengthen work to ensure that. Personal safety, prevent electric shock, poisoning, explosion and other dangerous accidents. When leaving work, carefully check whether the doors, windows, water, and electricity of each laboratory are closed. If any unsafe factors are found, report them in time. Waste liquids must be poured into a designated place. , destroy it in time

10. Complete other tasks assigned by superiors.