Construction site safety precautions?

What are the safety precautions at the construction site? Below, Zhongda Consulting will give you a detailed introduction for your reference.

A large number of machinery, facilities, materials and people are concentrated in the limited space of the construction site. As the image progress of projects under construction continues to change, the cross-operation between machinery and people and between people will become more and more frequent. Due to the large flow of personnel in construction, there are many open-air and high-altitude operations, coupled with light, The harsh working environment of rain, snow, wind, frost, etc. causes the project tracking personnel to lose concentration or become irritable, which leads to an increase in unsafe factors. It also changes due to changes in progress. It changes every month, every day, and even every hour, which brings many difficulties to safety protection.

Therefore, construction workers need to pay attention to the following safety matters:

1. Falling from height: Personnel fall from the edge and opening (including the edge of the roof, the edge of the floor, the edge of the balcony, the edge of the foundation pit, Falling at reserved openings, elevator shafts, stairwells, etc.;

2. Collapse: The formwork support of cast-in-place concrete beams and slabs becomes unstable and collapses; foundation pit slope instability causes earth and rock collapse; demolition projects collapse; the walls and roof panels of projects under construction are of poor quality and collapse.

3. Dust: During construction, there are mainly hazards of toxic gases such as cement dust, welding manganese dust and paint coatings. Project tracking personnel Protective equipment such as masks and gas masks should be worn.

4. Electric shock: electric shock caused by passing through or near electrical lines that lack protection; electric shock caused by touching electrical lines while erecting steel pipe racks, tying steel bars, or lifting; electric shock caused by using various electrical equipment; broken wires Aging, and no switch box protection.

5. Mechanical injuries: various types of lifting machinery, concrete machinery, steel processing machinery, woodworking machinery, excavating machinery, etc.

Colleague project tracking personnel also need to do the following to avoid unnecessary casualties:

(1) When entering the construction site, you must wear a safety helmet correctly (fasten the chin strap , the safety helmet is intact), do not wear loose clothing, slippers and other unsafe clothing, and wear protective shoes.

(2) Do not enter dangerous areas such as hoisting areas and vertical operations to prevent strikes from objects;

(3) Pay attention to passing vehicles to prevent vehicle damage;

(4) Stay away from various mechanical equipment and electrical lines to prevent mechanical and electrical damage;

(5) When entering foundation pits, roofs and other adjacent areas and various openings, you must concentrate to prevent high Fall;

(6) Pay attention to the ground environment conditions such as iron nails and steel bars to prevent other injuries such as punctures, bumps, hangings and falls;

(7) Smoking is strictly prohibited at the construction site , it is strictly forbidden to work after drinking, and it is strictly forbidden to play and play;

(8) During the tracking period of employee projects, any abnormalities in the body must be reported to the management staff in time, and tracking while sick is strictly prohibited.

(9) When people climb a height, they should first check whether there are any items that are easy to fall, such as mobile phones, keys, etc. Falling hurts someone.

(10) Employees should pay attention to warning signs and signs around them to avoid entering dangerous areas.

For more information about engineering/service/purchasing tender document writing and production to improve the bid winning rate, you can click on the official website customer service at the bottom for free consultation: /#/?source=bdzd