Common sense of electrolytic workers

1. What are the safety operation procedures for electrolytic workers?

In order to protect the safety and health of electrolytic workers, the safe operation procedures are as follows: ① When the electrolytic cell is charged, complete labor protection articles must be worn, trouser legs should be covered outside the work shoes, and protective glasses should be worn when punching holes and handling anode effect; (2) When operating on the electrolytic cell, people are not allowed to stand on the bus ditch cover plate, and their feet are not allowed to be placed on the cell platform, alumina surface, anode carbon block and anode steel claw; (3) During the operation, if the protective equipment is found to catch fire accidentally, put it out immediately, don't run around, and don't water it; (4) When taking electrolyte and aluminum liquid, use a preheated and dried electrolyte box and tools, pour out the liquid after it is completely condensed, and break the precipitate and aluminum oxide shell taken out of the tank after it is condensed; (5) When lifting objects, check whether the spreader is firm and command the crane to lift after it is stable; ⑥ During the processing, keep a distance of half a meter from the unit to avoid being injured by the unit or scalded by the overflowing electrolyte; ⑦ Tools should be stacked in the designated place, neatly stacked, and wet and defective tools should not be used; ⑧ Wear safety helmet when cleaning the sink and checking the cathode rod; Pet-name ruby report immediately after the accident, and actively participate in the rescue.

2. Safety operation procedures for electrolytic workers

Safety operation procedures for electrolytic workers

Job responsibilities of operators

1, responsible for wafer test operation;

2, timely report the abnormal situation in the production process.

3. Assist in engineering, quality control or other related work;

4. Keep the test area clean.

5, according to the requirements of process documents and equipment operation flow, complete the product production of this process;

6, do a good job in this process product quality, and cooperate with the inspector for product inspection;

7. Make records according to the requirements of quality and process documents;

8, according to the production plan to complete the output;

9, responsible for the maintenance of process equipment.

In fact, the responsibilities of each post are different in all walks of life. The following are the contents of the responsibilities of the operators:

1. Qualifications for this position

1 with junior high school education or above.

2 After relevant training, pass the examination and take up the post.

Have a good sense of quality, and be aware that you are both an operator and an inspector.

Second, the job responsibilities

1 Abide by discipline and system, and obey the leadership distribution.

Work hard to ensure quality and complete production tasks.

3 Abide by process discipline and operate according to process or operation procedures.

Pay attention to product quality, do a good job of self-inspection and cooperate with inspectors to do a good job of process inspection. Never let unqualified products flow into the next process.

Take good care of machinery and equipment, check the equipment after work and put it into production after it is confirmed to be normal. The production process should be carefully operated, and the abnormal situation should be reported to the team leader or workshop director immediately.

6. Do a good job in safe and civilized production. Wear work clothes and protective equipment when going to work; Before coming off work, clean the equipment and surrounding sanitation, and tidy up the tools. Take good care of public property, and be responsible for compensation if it is damaged, lost or wasted.

7 stick to your post and don't leave your post.

Carry forward the spirit of unity, friendship, mutual assistance and cooperation.

9. Study hard scientific and cultural knowledge, constantly improve operational skills, and actively put forward reasonable suggestions to leaders.

3. What are the industry risks of electrolytic workers?

The main toxicants exposed to workers are fluoride, sulfide, asphalt smoke and carbon monoxide.

Poisons mainly exist near electrolytic cells and flue gas purification systems. Aluminum electrolysis takes cryolite-alumina-aluminum fluoride melt as electrolyte and carbon material as electrode.

In the process of electrolysis, liquid aluminum precipitates at the cathode and gas is generated at the anode. At the same time, it also emits electrolytic flue gas mainly containing fluoride, dust and other pollutants.

At the temperature of 400℃~600℃, alumina can still contain 0.2%~0.5% moisture. Water in raw materials can react with solid fluoride salt at high temperature, and water entering molten electrolyte can also react with liquid fluoride salt to generate harmful hydrogen fluoride.

Inhalation of excessive fluoride often leads to skeletal fluorosis such as osteoporosis, hyperosteogeny, tooth mottle, etc., and severe cases lose the ability to work. Fluoride also has a strong corrosive effect on respiratory mucosa and skin.

According to China's health standards, the maximum allowable concentration of fluoride in the air of workplace is 0.5mg/m3. According to the principle of toxicity classification in the current national standard "Classification of Occupational Exposure Poisons", fluoride is Grade II, which is highly harmful.

4. Responsibilities and safety precautions of electrolytic operators

Job responsibilities of operators

1, responsible for wafer test operation;

2, timely report the abnormal situation in the production process.

3. Assist in engineering, quality control or other related work;

4. Keep the test area clean.

5, according to the requirements of process documents and equipment operation flow, complete the product production of this process;

6, do a good job in this process product quality, and cooperate with the inspector for product inspection;

7. Make records according to the requirements of quality and process documents;

8, according to the production plan to complete the output;

9, responsible for the maintenance of process equipment.

In fact, the responsibilities of each post are different in all walks of life. The following are the contents of the responsibilities of the operators:

1. Qualifications for this position

1 with junior high school education or above.

2 After relevant training, pass the examination and take up the post.

Have a good sense of quality, and be aware that you are both an operator and an inspector.

Second, the job responsibilities

1 Abide by discipline and system, and obey the leadership distribution.

Work hard to ensure quality and complete production tasks.

3 Abide by process discipline and operate according to process or operation procedures.

Pay attention to product quality, do a good job of self-inspection and cooperate with inspectors to do a good job of process inspection. Never let unqualified products flow into the next process.

Take good care of machinery and equipment, check the equipment after work and put it into production after it is confirmed to be normal. The production process should be carefully operated, and the abnormal situation should be reported to the team leader or workshop director immediately.

6. Do a good job in safe and civilized production. Wear work clothes and protective equipment when going to work; Before coming off work, clean the equipment and surrounding sanitation, and tidy up the tools. Take good care of public property, and be responsible for compensation if it is damaged, lost or wasted.

7 stick to your post and don't leave your post.

Carry forward the spirit of unity, friendship, mutual assistance and cooperation.

9. Study hard scientific and cultural knowledge, constantly improve operational skills, and actively put forward reasonable suggestions to leaders.

5. How to write the electrolytic worker's year-end summary

1. Begin to review the past year and briefly describe your work experience, such as "I have made some achievements under the leadership of department leaders in the past year" and so on. Take proper care of the reading taste of leaders.

2. Next, the strength and achievements of all aspects of work are listed in detail. For example, "I got the result of xx newspaper with my staff". Focus on your hard work.

3. Make a brief statement of the shortcomings of the work, first describe a large number of objective unfavorable factors, and then count the account on your own subjective factors. Example: "Of course, I am partly responsible myself."

4. Look forward to next year's work and list one or two ambitions, whether they can be realized. Example: "Please comrades and leaders look at my actual actions! ! "Attach a number of black exclamation marks to show your determination.