How to set up a network TV set-top box

The connection mode of network TV set-top box is determined by the interface of TV. The TV supports different interfaces and uses different cables.

Specific steps:

1, the TV has an HDMI interface. You can see the HDMI interface of the network TV set-top box, and insert this interface with an HDMI cable.

2. Find the HDMI interface at the TV interface, plug in the other end of the HDMI cable and turn on the power.

3. Old TV sets generally don't have HDMI interface, but TVs with AV interface can also be connected to network TV set-top boxes. First, prepare one to three AV lines.

4. Insert the black single head into the "AV" interface at the interface of IPTV set-top box.

5. At the interface behind the TV, plug in the other three interfaces according to the corresponding colors and turn on the power.

6. After the TV is turned on, select the corresponding signal source, operate with the remote control on the main interface of the network TV set-top box, and enter "System Settings".

7. In the interface of system settings, select "Network Settings", then click on the right to open the detailed interface of network settings, and select "Wired Settings".

8. Enter the wired settings, and click "Wired: Automatically acquire IP", so that the network TV set-top box can detect the network signal and acquire the IP address; It means that the TV set is successfully connected to the network through the network TV set-top box.

Reference: Baidu Encyclopedia? set-top box