What should we pay attention to in safety production?

(1) The workpiece and turning tool must be firmly clamped, otherwise it will fly out and hurt people. The chuck must be equipped with a safety device. After clamping the workpiece, the chuck wrench must be removed from the chuck immediately.

(2) When loading and unloading workpieces, changing tools, measuring the machined surface and changing speed, stop the machine first.

(3) When the lathe is running, it is forbidden to touch the surface of the workpiece with your hands, especially when machining threads, so as not to hurt your hands. It is forbidden to wipe the rotating workpiece with cotton yarn.

(4) Use a special iron hook to remove chips, and never remove them directly by hand.

(5) gloves are not allowed when operating on the lathe.

(6) The blank bar should not extend too long from the end of the spindle hole, and a material rack or baffle should be used to prevent people from being hurt after bending.

(7) Don't stop the rotating chuck by hand.

(8) Don't disassemble and assemble electrical equipment at will to avoid electric shock.

(9) If machine tools and electrical equipment are found to be faulty during work, they should be reported in time and repaired by professionals. They should not be used until they are repaired.

Extended information:

Precautions in winter:

(1) Pay attention to preventing paralysis

The weather is changeable in cold and warm, and people's hearing, vision, actions and emotions begin to be affected to some extent, and their thoughts are easily relaxed. Once they are not paid enough attention to it, they will not be responsible for their ineffective work. To this end, we must improve employees' ideological understanding, strengthen warning education, strictly enforce the responsibility system for production safety, earnestly strengthen the management linked with leaders, implement responsibilities, and promote the steady improvement of employees' production and working conditions.

(2) Pay attention to fire prevention and explosion prevention

In winter, air-dried materials are dry, which is prone to fire and explosion accidents. It is necessary to organize regular investigation and management of fire hazards in combination with their respective realities, carefully check the integrity and effectiveness of fire-fighting equipment in their respective departments, and eliminate fire hazards in time.

(3) Pay attention to anti-freezing

When the temperature is below zero degrees Celsius, it is necessary to do a good job in anti-freezing of equipment and vehicles, such as wrapping straw bags or ropes around outdoor water pipes, gates and other equipment, and discharging the water in pipelines and equipment in time to prevent the equipment from freezing and affecting production. In addition, it is also necessary to prevent frostbite of post employees.

Resources: Safety in Production _ Baidu Encyclopedia