Workshop Clerk Work Summary Model Template

Time flies, and the next stage of work is getting closer and closer! It's time to write a summary Work summary makes work more efficient, so what are the excellent summary templates? After my careful arrangement, I published a model essay summarizing the work of workshop clerks, hoping to help your study.

Workshop Clerk's Work Summary Model essay 1 How time flies! Before you know it, 20xx years have arrived! In the past year, my life has taken a little turn for the better. Due to the cultivation and trust of leaders, I was lucky enough to work in the production workshop office in May of 20xx as a workshop statistics post. Since I entered the office, with the help and support of leaders and colleagues, I have closely focused on the work tasks of the workshop statistics center, obeyed the work arrangement, studied hard, strengthened my exercise, improved myself in an all-round way, and successfully concluded my work and all the work assigned by the leaders. The following is a brief summary of my recent months. First, strengthen study and improve yourself.

Doing workshop statistics is the first knowledge I have come into contact with since I worked. According to the arrangement of the leaders and the needs of my personal work, I received training in computer knowledge and some statistical knowledge at the same time, which made me familiar with statistical work and laid a good foundation for me to be skilled in statistical work in the future.

Insist on doing everything with enthusiasm, initiative and responsibility at work. No matter where you are, you can adjust your status in time to ensure that you have enough energy to work and try to do your job well. From the workshop to the office, I was unprepared and went to work as soon as I got to work. Although there has been no mass production since I entered the workshop office, I will never relax every step because I just took over the statistical work. Strive for everything to be done well and meet mass production at any time.

Unite with comrades and consult modestly. Because I have just transferred to the office, I am not very familiar with the products, and I will inevitably encounter some incomprehension. Whenever this time, I will take the initiative to ask my experienced colleagues or leaders for advice. I will humbly accept and seriously consider the opinions, suggestions and even criticisms put forward by comrades. No matter where I am, I can live in harmony with my colleagues, unite and cooperate, and strive to establish good interpersonal relationships, thus forming a harmonious working atmosphere, thus stimulating my love and passion for my work, thus promoting the development of my work in all aspects in a better direction and achieving twice the result with half the effort. Second, be serious and responsible and work actively.

Statistical work is a very important work, and it is also the focus of my usual work. With the continuous development of the company, the planned output is increasing, which will require my report to be more timely, accurate and detailed, and will also inspire me to do a better job in statistics.

Workshop clerk work summary model essay 2 Time flies, time flies. We are about to usher in a new year. In the past year, with the strong support of the superior leaders, the close cooperation of all departments and the concerted efforts of all employees in the department, the production department successfully completed all tasks assigned by the company. Here, I want to sum up the work of the production clerk in the past year and wish our company better next year.

I. Work Review

1 product output

Over the past year, the production department has carried out experiments and explorations in the production process under the circumstances that three or four kinds of products are changeable in model, small in batch, unstable and imperfect in technology. In order to meet the customer's output and quality requirements, our department adjusted the production plan reasonably, and used limited resources to meet the customer's delivery time in time, which laid the foundation for the diversification of products in the future.

2. Product quality

In this year's work, every product is entered into the electronic file in time. I firmly believe that as long as every employee fully participates in every link of production while raising product awareness, product quality will definitely improve steadily.

3. Equipment management

In the past year, the equipment was relatively good, and the main work was not affected by equipment problems. Under regular maintenance and repair, the normal operation of the equipment is ensured, thus ensuring the stability of production.

4. Personnel management

At the beginning and end of each year, when the staff changes and the production line staff is extremely unstable, this undoubtedly brings great pressure to production management. However, driven by this pressure, the department still insists on pre-job and on-the-job training for new employees to ensure that new employees can smoothly enter the post role and basically be competent for job rotation.

5. Safe production

Over the past year, safety in production has been incorporated into the daily management of production clerks, and the safety knowledge education of employees in various workshops has been done at any time to urge the elimination of safety hazards in various workshops, thus ensuring the orderly operation of production workshops.

Second, the existing shortcomings and countermeasures

Although the production clerks have done a lot of work in the past year and made some achievements, there are still many problems, mainly in the following aspects:

1 quality management

Employees are indifferent to quality awareness, and some employees have nothing to do with themselves and are indifferent. This has a lot to do with cultivating employees' quality awareness, establishing quality crisis awareness and implementing product quality responsibility system.

2. Lack of the concept of full participation in quality management.

What we lack now is the quality consciousness of full participation. Under our piece-by-piece inspection and inspection without quality control, sometimes the implementation is not in place.

3. Lack of awareness of production quality records

Due to the piecework in our department, colleagues who increased production instantly ignored the quality records of the product production process.

4. Personnel management

The mental outlook and tension of employees are lacking. In this regard, we are planning to carry out rectification and formulate perfect rules and regulations and training plans. Implement effective incentive measures to continuously improve the comprehensive quality of employees to meet the needs of the future development of enterprises.

5. Material consumption management.

Because we didn't evaluate the material consumption and cost before, when the abnormal cost increases, such as high tool loss rate, excessive material quality and waste caused by improper assembly and storage of employees.

Third, personal summary.

The year 20xx is coming to an end. During this year, I overcame all kinds of difficulties through my own efforts, especially with the strong support of my leaders. This year is meaningful, valuable and rewarding. After this year's work as a production clerk, I am familiar with the company's operating procedures and master the operating procedures of the company system, which has laid a certain experience foundation for future work.

Finally, I want to say that no matter where you work or what you do, your attitude and mentality are very important. If you relax when you encounter something, you can better handle and solve the problems you face, calmly face the challenges, constantly enrich yourself, objectively face your own shortcomings and improve better. Everyone will have a bright future!

Workshop clerk work summary model essay 3 time flies, time flies. It's another winter. In this new year, I look back on my work with mixed feelings. With the care and support of leaders at all levels, great progress has been made in all work. Now make a simple summary from two aspects: crystal pulling and construction supervision.

A brief review of crystal pulling work in the past 12 years

It has been 12 years since the crystal was pulled in June, 1997. From pulling crystal in three Sibel furnaces to being an apprentice in the old 8 workshop, Jinglong Songgong went to the installation and debugging of electronic materials, that is, Songgong V workshop. With the vicissitudes of time and the progress of the times, my operation and maintenance footprints have been left around every single crystal furnace. I have taught many apprentices for twelve years. According to incomplete statistics, there are 2 1 batch of apprentices I have taught. * * * 37 people. Recently taught Zhuoyue and Yufeng. Among the apprentices, two are now ministers and five are directors. Some people go to the group and other units in the group as technical backbones or senior administrative personnel. During the twelve years, I have made great achievements in crystal pulling, maintenance, team management, statistical summary, process research and development, equipment inspection and engineering supervision. Accumulated rich technical and management experience. I took part in many special trainings to recharge my batteries. In the past 12 years, after work, I took advantage of the convenience of being close to home and made many special trips to repair the stove late at night to solve the crystal pulling problem. One is not afraid of hardship, the other is not afraid of fatigue, the third is not concerned about remuneration, and the fourth is not concerned about promotion. I have worked in obscurity for 12 years.

Second, a year's work summary of R&D Center

The financial crisis did not affect the development of R&D in _ _ _. From the sixth day of the first month, the 90 furnaces and control cabinets produced by the equipment company were debugged, and the ccd automatic diameter control experiment was carried out, which achieved certain results. It lays a theoretical foundation and practical experience for the normal operation of automatic single crystal furnace. Experiments and large-scale production of 6-inch, 6.5-inch, 8-inch and 9-inch single crystals have been successfully completed by using _ _ thermal system. The data of oxygen and carbon content, lifetime and attenuation of single crystal are analyzed scientifically. The best scheme of production cost, especially power consumption, is calculated by comparison. The experimental innovation projects such as magnetic field crystal pulling, molybdenum draft tube and tungsten wire rope crystal pulling were completed. As well as the improvement of production technology such as changing the rotation and cooling mode of crystal crucible, and the innovation of prolonging the life of single crystal minority carriers, have achieved certain results. It has made certain contributions to the reform and innovation of crystal pulling process and energy saving and consumption reduction.

Third, supervise many construction quality next year.

In the following year, 28 construction projects in four categories in the production department were fully tracked for quality inspection.

1 and v workshop civil engineering supervision

Since I accepted the civil engineering of Workshop V on June 9th, I have tried my best to develop my hardworking, studious and dedicated spirit in the face of a strange industry. I know very well that if you want to supervise well, you should not only understand but also be good at supervision. So I started with drawing and spent two days reading and understanding all the engineering drawings. In order to keep abreast of the engineering situation and problems existing in the construction. I arrive at the factory half an hour in advance every morning, and visit all the construction sites in charge of I workshop, iii workshop and V workshop, and coordinate and solve problems in time when found. Report to Minister Zhang's office before 8: 10 every day. In order to finish the work better, I made my own schedule, strictly demanded myself, and worked overtime several times according to the progress of the project. One and a half months in summer, after work at 5 o'clock, I worked overtime until 7 o'clock to get off work with the construction team. In addition to completing the supervision work, I also helped the factory director to complete the material statistics, summary, analysis and reservation of waterway accessories in the fourth workshop. And complete other tasks assigned by the leaders in a timely and efficient manner. I work overtime every night to study cad drawing and read all kinds of architectural books and online materials. In this way, the supervision of 80 single crystal furnace foundations, 80 vacuum pump foundations, 12 cooling tower foundations, 2 ar tank foundations, 3 transformer foundations and indoor equipment foundations in the distribution room, as well as the reconstruction of dangerous buildings in the third workshop, were completed. I measured the daily workload of each civil engineering project and compared it with the drawings, and found many problems. I coordinated with the construction leaders to solve many problems, some of which have been reported to the leaders for their solution. For the company, unnecessary losses caused by civil engineering mistakes have been reduced, and the engineering quality has been further improved.

2. Welding supervision of steel structure platform and circulating waterway.

I successfully supervised the completion of the workshop _ _ square meters steel platform and the distribution room 400 square meters steel platform, as well as the steel ladder and small steel platform of each pump room; Completed the welding supervision of pure water and tap water pipeline of circulating waterway in V workshop; Completed the welding construction inspection of vacuum pump room, plate changing pump room, pipeline pump room and refrigeration room pipeline; And the welding construction inspection of pure water and tap water pipelines in the first workshop. I supervise them carefully. In order to better test the quality of derusting, welding and painting, I taught myself the inspection standards of steel structure, welding quality, weld classification standards, inspection and treatment of common welding defects and the standards of derusting grades st2 and st3, mastered the specifications of welding defects and derusting grades, and applied them to the inspection quality in construction, further improving the construction quality.

After a month's continuous hard study and the care and help of colleagues and leaders, I have slowly begun to integrate into the big family of Chuangshida, and my personal work skills and work level have also improved. Now I will summarize my work for more than a month as follows:

1. Down-to-earth working attitude Clerk is an important hub post for the internal operation of enterprises and institutions, and a comprehensive post for internal work communication, coordination and handling. Due to the shortage of staff in our office, I will cooperate with the manager and supervisor and work hard. I will ask them for advice in time if I don't understand anything, and complete the tasks assigned by the leaders with high quality and efficiency.

2. Be strict with yourself and always be vigilant at work. I will try my best to do everything well, sum up everything, constantly explore and master methods to improve work efficiency and quality. Because I am still a new employee, I still lack in dealing with people and working experience. I can learn and consult with old employees modestly in my daily work and life. Learn from their strengths, reflect on their own shortcomings, and constantly improve their work efficiency. Always remind yourself to be sincere with others, have a correct attitude, and actively try to do things well, no matter how big or small. At ordinary times, we should always demand ourselves, strictly abide by labor discipline, unite the team and start from small things; Treat everything with the belief that you don't want success, but you don't want anything.

Third, there are shortcomings.

1. I am not serious enough in my work, and my post knowledge needs to be further improved. You can't be strict with yourself, and you can relax yourself at work.

2. I haven't fully mastered the working procedures, and I'm not fully familiar with my work and business, and I'm not forward-looking. Therefore, I occasionally encounter a hurry in my work, and even some mistakes that should not appear.

Fourth, the direction of future efforts.

1. In the future work, we need to consult and learn from leaders and colleagues with an open mind, instead of coordinating and communicating, and think, plan and learn from each other from the overall situation in order to improve our work level.

We must improve the quality of our work and have a strong sense of professionalism and a high sense of responsibility. After everything is finished, we should think and summarize, so that we can really make the work planned and implemented, especially to find out the shortcomings in the work and facilitate self-reflection.