Manufacturing dimensions of kitchen cabinets.

1, the height of the kitchen console, the best cabinet height is 80-90cm.

Choose different counter heights for children's shoes with different heights. Please refer to the following data:

Height 150cm, kitchen console height 80cm；;

The height is 155cm, and the height of the kitchen console is 82.5cm；:

The height is 160cm, and the height of the kitchen console is 85cm.

The height is 165cm, and the height of the kitchen console is 87.5cm:

Height 170cm, height of kitchen console 90cm；;

The height is 180cm, and the height of the kitchen console is 95cm.

2. It is suggested that the depth of the basement should be about 55cm, and the height should be below the console height.

3. The height of the hanging cabinet is suggested to be about 60cm, and the local hanging cabinet can be considered to be 50cm.

4, the size of the sink area, single sink, the general length of 60cm, double sink, the general length of 70-90cm. The depth of the sink is at least greater than18cm. The best height between the faucet outlet and the countertop is 23-30cm, which can reduce the problem of splashing water.

5. Table Size Division: Drainage Area; 30cm, food preparation area 60cm, loading area 30cm.

6. Selection of refrigerator capacity: 200L+ capacity for a family of three and 300L+ capacity for a family of five.

7. Installation height of range hood: the top range hood is 65-70 cm; The side smoking machine is 30-35cm.

Extended data:

Precautions for cabinet layout:

1. Keep a certain distance between the cooker and the wall, and try not to stick it on the side wall to avoid the collision between the pot edge and the wall.

2. On the side of the cabinet against the wall, the protrusion of the door line must be considered to avoid the opening and closing of doors, drawers and baskets being affected.

3. There should be enough space between the sink and the cooker, preferably more than 800, but not too far away, which will make the operation run back and forth.

4, pay attention to the reasonable configuration of accessories Although the accessories of cabinets are diverse, the accessories suitable for each kitchen are different, which can achieve convenient use and powerful functionality.

5. The joint of the table corner must have a reasonable area range, so as not to be broken under the influence of the acting force.

6. Pay attention to the reserved position of the socket. The socket between the countertop and the hanging cabinet should be far away from the sink. The socket of the refrigerator is best set on the side or upper side of the main wall, and there are kitchen treasures. Microwave oven. Range hood disinfection cabinet. Oven. Wait a minute.

7. The rectification of the gas pipeline needs to be coordinated with the gas company. It is best to let the outlet pipeline and the inlet main pipe side by side, and minimize the guaranteed board area of the pipeline on the countertop to expand the use area of the countertop. Rectify the gas pipeline in advance to facilitate the opening of the cabinet.

8. There are two ways to solve the hood pipeline: first, before laying the brick ceiling, it is best to preset the hood pipeline in the ceiling and seal the side opening, and calculate the hanging position of the hood outlet; Second, it is installed at the lower part of the ceiling, and covered with the ceiling after installing the hanging cabinet.