Construction organization design of the second-class project of a dormitory in Jiangsu?

what is the specific content of the construction organization design of the second-class project in a dormitory in Jiangsu? Here, Zhongda Consulting will answer your questions.

general situation of the project

general situation of the building in the first section

Units C and D of the dormitory in Jiangning Campus of a college in Jiangsu Province are designed by a college in Jiangsu Province, and the project is located in a campus of a college in Jiangsu Province. The main part of the dormitory is a six-story brick-concrete frame structure with a 2.7M high eaves and a construction area of 1978M2.

This project is a Class II project, and its decoration is as follows:

1. Interior wall:

General wall: latex paint wall

bathroom wall, Height to ceiling: glazed tile (tile) wall

2. Floor:

corridor, stairs, dormitory and student activity room: cement floor

bathroom and toilet room: tile floor (with waterproof layer)

corridor, stairs, dormitory and student activity room: cement floor

bathroom and toilet room.

5. Roof:

General roof: EPDM waterproof extruded board roof (polystyrene insulation board inverted roof)

Roof above corridor and balcony: polyurethane waterproof coated roof.

6. Doors and windows: aluminum alloy doors and windows and wooden doors 7. Paint:

Wood door paint: light beige mixed paint twice.

metal paint: white mixed paint twice.

8. Ramp: cement ramp.

general situation of the structure in the second quarter

This project is fortified according to the seismic fortification level of seven degrees, and it is a Class C building and a Class II site, which is in an unfavorable location for buildings. For details, please refer to the geological report, and the safety level of the foundation is Class C. Strength grade of concrete: the cushion is C1, and the rest are C25.9.6 The strength grade of bricks below is MU1, the strength grade of mixed mortar is M1, the strength grade of bricks above 9.6 is MU1, and the strength grade of mixed mortar is M7.5 The main wall is built with KPI bricks, and the non-load-bearing structure parts are all made of light partitions except the brick walls marked with 12 (with hollow bricks of MU1 and M5 mixed mortar). The weight of the wall shall not be greater than 1.2KN/M2.

Section 1 Construction Conditions and Engineering Features

1. The project is located in Jiangning, and the traffic is not restricted, but the civilized construction, sanitation and neatness shall not be relaxed. In order to expand the enterprise's awareness, all the roadside living areas are whitewashed and publicity slogans are written.

2. Large quantities, tight construction period and high quality requirements:

This project is for students' dormitories, and the quality of the project is particularly important, so the quality standards are high, which requires us to maintain a rigorous scientific attitude, elaborate organization and elaborate construction.

for more information about the engineering/service/procurement bidding, and to improve the winning rate, you can click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd