What are your opinions and suggestions on the work of the propaganda department of colleges and universities?

What are your opinions and suggestions on the work of the propaganda department of colleges and universities? Work Plan of Propaganda Department With the arrival of the new semester, every department is facing new challenges and opportunities, and our propaganda department is no exception, especially for the establishment of university campus culture. Therefore, we hope to fully tap students' propaganda ability, strengthen the cultural atmosphere of the department and open up new propaganda positions by carrying out flexible and diverse competitions such as calligraphy, blackboard newspaper and painting. I. Work objective 1. Strengthen the link role of the propaganda department and actively cooperate with other work. Strengthen the contact between various departments and actively exercise the propaganda function. Actively cooperate with the network department, news center and secretariat to do a good job in website publicity, adding highlights to the publicity work of our hospital; 2. Improve the influence of the Institute of Engineering and Technology in the school and expand its popularity. Publicize and carry forward the lively, diligent and enterprising style of our school of engineering and technology; 3. Make full use of exhibition boards and posters to summarize and publicize the activities in the hospital; 4. Reform the internal operation mechanism of the Propaganda Department. Let everyone's ability be brought into play and improved, and there is room for exercise; 5. Build the Propaganda Department into a warm and humanized family. Second, the main work arrangement of the new semester, the main work in March, the writing and distribution of the evaluation certificate of the last semester, and assisting the learning department and other associations in promoting the work. Strengthen the publicity of activities. The single conventional propaganda mode on campus has caused everyone's visual fatigue to some extent. How to innovate the publicity mode will become an important factor to determine the publicity effect. Therefore, the propaganda department will explore more publicity channels, or improve the layout of leaflets and posters to attract students' attention to the activity information. In the past, the publicity work always focused on the previous publicity, thus ignoring the follow-up reports after the event was held. Post-publicity is not only an important stroke for the public, but also a summary of organizational activities. The organizer must communicate with the propaganda department in advance, including banners, posters, production requirements, live photography of the event, etc. Hold some calligraphy and painting exhibitions in April, choose some fashionable and rich themes, let students give full play to May, and actively cooperate with school activities to make publicity. Strengthen the management of posters and blackboard newspapers and let them complete their tasks. Because of this, we linked work performance with assessment, which greatly improved the enthusiasm and enthusiasm of employees. It not only gives officers the opportunity to exercise, but also forms a sense of competition in the department. On the other hand, it strengthens the contact between officers, promotes the understanding between officers, and makes the whole department more United and powerful! Secondly, we also send a person to take charge of the blackboard newspaper work, and the person in charge will assign tasks. Everyone works actively and enthusiastically, and the blackboard newspaper is very good-looking, thematic and meaningful. It embodies the responsible and serious working attitude of the propaganda department director. During the summer vacation in June, we will publicize various activities and hold a forum to let everyone freely exchange ideas, share feelings and summarize the work of this semester. 3. Put work first, carry forward the spirit of innovation and creatively carry out publicity activities. On the basis of adhering to the traditional way of publicity, we should broaden our thinking and show the progress of the School of Management to all teachers and students through various channels. Our department will actively cooperate with the network department, news center and secretariat to do a good job in publicity. Add a bright spot to the propaganda work of our hospital. Second, strengthen exchanges among members of the Propaganda Department, hold symposiums and sum up experience. Third, do a good job in the publicity of school activities. The work of the propaganda department is busy in the ministries and commissions of the student union. Complete the tasks entrusted by the student union and ministries within the specified time, and do a good job in publicity of various activities ... Summarizing the work of the propaganda department in the ministries and commissions of the self-management Committee is busy. Complete the daily work and tasks entrusted by the ministries within the specified time, do a good job in publicity of various activities, and improve the self-construction of the propaganda department. Build the Propaganda Department into a united and positive whole. All members of the propaganda department will strive to improve their own quality in their work, work actively, enrich the forms of propaganda, innovate their work and constantly improve themselves. We believe that we will do our best to cooperate with other departments to do a good job in the student union, and at the same time increase publicity to ensure timeliness and ensure the smooth and effective development of the work.

Your opinions and suggestions on the legal publicity work in our school, combined with the local legal department to carry out a series of activities, through 122 traffic safety day, 1 19 fire protection day, legal publicity month and other related activities to promote knowledge into the campus.

On procuratorial work from the perspective of "campus legal publicity" ...

Opinions and suggestions on the work of the Party branch. Establish a new concept of mutual integration, simultaneous promotion and simultaneous strengthening of party building work and enterprise reform and development.

1, integrated into the concept of the center. If party organizations in enterprises do not focus on party building according to the requirements of enterprise reform and development, party building will become passive water, and the core role of party committees will be difficult to play. Party organizations in enterprises should closely focus on the theme of enterprise development, plan and promote party building work, and constantly innovate in "combination" and "integration" to achieve "grasping development, we must grasp party building; Grasping party building means grasping development and becoming a leader's * * * knowledge. Party committees should persist in active planning, intervene in advance and integrate into the center to promote development. When studying and deploying party building work, we should first consider what is the key point of enterprise production and operation and how the party organization can play its role around the center.

Ensure the role, and then plan the carrier and theme of party building work, adhere to actively participate in major decisions of enterprises, actively cooperate with production and operation, actively support administrative management, and actively solve hot and difficult problems, infiltrate party building work into the whole process of production and operation management, and ensure that the central work and key work of enterprises have the voice, activities, image and role of party organizations.

2. The idea of rejuvenating enterprises through talents. Specifically, it is necessary to focus on strengthening the awareness of enterprises to rely on talent development and constantly optimize the environment for cultivating, attracting and using talents; Correctly handle the relationship between enterprise development and employee development, and take the realization, maintenance and development of employees' fundamental interests as the starting point and foothold of party building work.

3. Develop innovative ideas. We should keep pace with the times, study and solve the new situations and problems encountered in party building work in enterprises, and explore new ways to combine party building work with management work in enterprises with innovative ideas and methods.

4. The concept of service. Adhere to the concept that enterprise party committees serve grass-roots party organizations, grass-roots party organizations serve party member, and party member serves the masses. Strengthen the party's self-construction in service, enhance the appeal of party organizations in service, and improve the cohesion of party organizations in service.

Second, to strengthen the party building work in enterprises, we must do a good job in the self-construction of party organizations.

1. Establish and improve grass-roots party organizations. First of all, it is necessary to ensure that the Party building work extends wherever the production and business activities of enterprises go, so that party member is educated and bound by the Party no matter what position he works in. Party organizations should keep track of education and ensure the effective management and burial of party member. Secondly, we should actively do a good job in the development of party member. Party member's development work should focus on those who have professional knowledge, are good at management, have excellent skills and outstanding achievements, and constantly replenish fresh blood to lay the foundation for the development and growth of party organizations.

2. Improve the working mechanism of "one post and two responsibilities" party building. According to the idea of "paying attention to both production and management and party building", we should implement the responsibilities of cadre management.

The post between the party and the masses is "shouldered", the task is "double responsibility" and the performance appraisal is "tested on both sides". In specific work, we should adhere to the same arrangement, implementation, inspection and assessment of party building work and production and operation work, correct the same phenomenon of doing or not doing, doing well and doing poorly, ensure that "one post and two responsibilities" are implemented, and make party building work and business work develop together.

3. Establish and improve the system of grass-roots party organizations. A good system can make people less likely to make mistakes, and a bad system can make people easy to make mistakes without restraint. Therefore, the system construction should be changed from temporary arrangement to institutionalization and standardization, and the system of learning, ideological reporting, regular conversation and going out to contact should be established.

Third, pay attention to party member's ideological education.

Party member's image affects the image of the Party organization, and workers know the Party from every word and deed of party member. To maintain the advanced nature of Communist party member, we must strengthen regular ideological education. In terms of educational content, we should focus on the education of socialist core values, professional ethics, enterprise development situation and party discipline and state law, so that party member cadres can realize the unity of traditional virtues and the spirit of the times ideologically.

First, the unity of being a man and doing things, the unity of power and responsibility, and the unity of personal interest and dedication. In the way of educational activities, we should change from centralized activities to the combination of centralized and decentralized activities, paying attention to decentralization and flexibility; In the activity time, from full-time activities to the combination of full-time and amateur activities, mainly amateur changes; In the content of activities, we should change from "single type" to "comprehensive type", focus on improving the fighting capacity of party organizations and the comprehensive quality of party member, and on the carrier of activities, we should pay attention to giving play to the leading and exemplary role of advanced models around us, and carry forward the new trend of striving for Excellence.

Comments and suggestions on teachers' teaching work? Old teachers' opinions and suggestions on school education and teaching;

1, the weekly meeting is essential, so teachers should be asked to put forward some suggestions and questions about school work.

2. When the national flag is raised every Monday, school leaders should make a speech, focusing on safety, civilization, hygiene and habits.

3, strengthen the contact between the school and parents, let parents put forward the shortage of school work.

4. Actively carry out extracurricular activities, such as skipping rope, kicking shuttlecock, shooting, football shooting, tug-of-war, hiking and dancing between classes. Pay attention to cultivating students' spirit of unity.

5, strengthen discipline management, in the teaching building must not play, walk quietly.

6. The head teacher must follow the class.

How to strengthen primary school teaching? Opinions and suggestions on improving teaching quality;

Primary education is basic education. Improving the level of compulsory education is an important task, and it is the key to comprehensively implement the education policy and solidly promote quality education. In order to improve the quality of education and cultivate teaching quality to meet the requirements of the new century, according to the requirements of our city, "focus on strengthening the management of primary education and teaching, improve the quality of teaching, and establish and constantly improve the monitoring system of teaching topics". In view of the problems existing in the above-mentioned primary schools, combined with the spirit of "school spirit, teaching spirit, study style construction, etc.", in this year's city-wide education system, the author believes that strengthening primary school management and effectively improving teaching quality should focus on the following points:

(A) raise awareness, and constantly strengthen quality awareness.

The poor quality of primary school teaching, on the one hand, easily leads to students repeating grades, wasting volunteer resources and hindering the overall promotion of quality education. On the other hand, unqualified primary school students are easy to drop out of school because of learning difficulties after graduation, which affects the teaching quality of junior high schools and consolidates and improves nine-year compulsory education.

(2) Take various forms simultaneously to improve the overall quality of certain primary school teachers.

Schools should take improving teachers' quality as the strategic focus of improving the teaching quality of primary schools, closely combine with the curriculum reform of basic education, take changing educational concepts and improving professional ethics and the level of education departments as the standards, conscientiously implement the construction of teachers, actively explore the establishment of incentive mechanism under the new situation, improve the assessment system, adhere to the principle of "those who are capable are superior to those who are mediocre", and dismiss teachers who cannot perform their duties according to law.

(C) pay attention to practical results and improve the teaching management system

Establishing and perfecting school management system is the basic work to improve teaching quality. A primary school must, according to the Party's principles and policies, relevant laws, regulations and conditions, and according to the basic requirements of routine management of primary schools, carefully formulate and improve various rules and regulations of the school to ensure the standardization and effectiveness of school education. At present, we should focus on the following aspects of system construction:

1, the reporting system should be strictly implemented.

2, to strictly implement the system of teachers and students work and rest and attendance.

3. Establish a teacher learning and training system.

We should improve the class system.

5, the establishment of teaching research, teaching reform results inspection, evaluation, exchange system.

(4) Comprehensive evaluation and monitoring of teaching quality.

The subjects of primary education quality monitoring are mainly Chinese and mathematics, and the content is stipulated by the syllabus. The main teaching content is to check the qualified rate of students and adopt the scoring system. The results of canceling the percentage system shall be reported to the county-level education department.

(5) Strengthen leadership, clarify responsibilities and strengthen functions.

Strengthening school management and improving the teaching quality of a primary school is the common task of education administrative departments at all levels, teaching and research departments and township central schools. It is an effective way to improve the teaching quality of a primary school by clarifying the responsibility, implementing the leadership responsibility system, strengthening the township center and personally managing the teaching quality of primary schools.

Opinions and suggestions on safety supervision Safety inspection is a comprehensive safety management measure. Through inspection, learn from each other, raise awareness, understand the situation, find problems, investigate hidden dangers, increase methods and measures, enhance preventive ability, sum up experience, learn lessons, strengthen management, promote safe production and promote development.

"Safety responsibility is more important than Mount Tai". Although the form, content and function of safety inspection have been strictly emphasized and demanded by the superiors, and the inspectors themselves have made many improvements and improvements to the methods and effects of inspection, the effects of safety inspection are always not obvious, and all kinds of inspections are superficial and always exist to varying degrees, which makes the functions of discovery, supervision, guidance and warning of safety inspection not fully exerted. As a full-time safety administrator of the unit, combined with the practice in safety management, I talk about my understanding and experience in safety inspection.

First of all, we should make clear the purpose of safety inspection.

Safety inspection is to establish a good safe working environment and order, and it is one of the important means to ensure the sustained, coordinated and stable development of economic construction. Safety inspection is a means to discover the existence of unsafe factors, which is the first ideological problem that inspectors should solve. Every inspection, what to check, what to achieve through inspection, and what kind of effect to achieve, as an inspector, we must first know fairly well. In safety inspection, it often happens that the inspected only knows the general content to be inspected, and the inspector is not very clear about the purpose and significance of his participation in the inspection. In this way, over time, the number of inspections increases, and the inspectors become accustomed to it, and the inspected people become slack, paralyzed and tired, thinking that inspection is one thing. Therefore, before each inspection, the purpose and significance of the inspection can be explained by on-site mobilization and heart-to-heart, combined with the actual situation, so that each participant has a clear purpose and know fairly well.

Second, the road transport safety production management

Mainly "three customs and one supervision" (strictly control the market access of transport operators, strictly control the technical status of operating vehicles, strictly control the qualifications of operating drivers, and do a good job in safety supervision of bus passenger stations). For road transport enterprises, the inspection items can be roughly divided into: the establishment of safety management organizations; The implementation of the responsibility system for production safety; Safety management system and its implementation; Safety and supervision; Carry out safety publicity, education and training; Driver management; Management of operating vehicles, etc. For bus passenger stations, the inspection items generally include: personnel setting of safety management institutions; Safety management system and its implementation; Safety production facilities and equipment; The implementation of safety operation procedures; Implement safety publicity, education and training. The content of safety inspection is extensive, and it should be targeted before each inspection.

Third, we should highlight the key points.

In general, the time and process of safety inspection are relatively short. If the inspection is general, it is bound to take a cursory look, or even miss the inspection. Therefore, the security inspection should be point-to-point and focused. The inspection should be combined with the actual work, mainly highlighting the two basic points of human behavior, the state of things and the "software" and "hardware" of safe work. Specifically, publicize, study and implement the laws and regulations on safety in production; The implementation of the important instructions and requirements of leaders and departments for safety production; Seriously carry out safety knowledge education and training for all staff, and focus on organizing cadres and workers to study, discuss, apply and popularize safety business knowledge; Seriously strengthen the daily management of safety work, and regularly and irregularly carry out daily and special inspections of safety production; Investigation, prevention, treatment and rectification of hidden dangers in production safety; Strengthen the maintenance, management and use of all kinds of equipment and facilities; Do a good job in the "software" construction of safety work, the formulation, revision and implementation of various rules and regulations, and so on.

Fourth, we should pay attention to methods.

The key to safety inspection is to overcome * * *. There are various manifestations of safety production, some of which meet the requirements of generalization and call for generalization. Documents are implemented by documents and meetings are implemented by meetings. The safety inspection work is not targeted; Some people are used to constant slogans and many tricks. On the surface, they have great momentum, but they do not solve practical problems. Some people even cheat, in order to win the satisfaction of their superiors, they lie about the identified security risks, reporting good news instead of worrying. The * * * in safety production is very harmful, not only the rules and regulations are difficult to implement, but also the safety management is a mere formality, leaving hidden dangers.

V. Finding problems

Generally speaking, we can start from the following aspects: from the software aspect, we can find out the problems that the inspected unit does not adapt to the superior regulations and actual work in terms of safety rules and regulations, standardization construction and standardized management; Find out the problems from the post, and find out the shortcomings or problems existing in the labor discipline, arrival and implementation system of the inspected unit; Find out the problems from the equipment and facilities, and find out the hidden dangers or problems in the equipment and facilities through the maintenance status of the existing equipment of the inspected unit; Find or find problems from the site and management, and find or find hidden dangers or problems in site management through spot checks on the work site; To conduct a comprehensive investigation on the safety production and management measures of the inspected unit, analyze the hidden dangers or problems existing in some aspects of the unit, and scientifically grasp the reasons, danger degree, possible hazards and countermeasures; Discover or discover problems from careful observation and accumulated work experience.

Sixth, put forward opinions

For hidden dangers found or discovered, inspectors should promptly put forward correct disposal opinions to the inspected units. Generally speaking, there can be: preventive opinions, preventive measures and programs for general problems or possible hidden dangers; Rectification opinions and measures for potential accidents or problems that may have occurred or appeared; Summarize opinions and put forward safeguard measures to ensure that the hidden dangers that have been rectified will not happen again; Opinions, methods, measures and key points put forward to the inspected unit to promote the development of safety work through rectification of hidden dangers; Comprehensive opinions, put forward opinions or suggestions on site management, equipment update, technology application and sustainable development to the inspected unit.

Seven, take measures to adopt

Opinions and suggestions on the work of the People's Bank of China? Strengthen bank supervision, effectively solve the phenomenon of bank charges, help * * * regulate prices, and effectively solve the phenomenon of excessive inflation.

Improve financial policies and regulations, so that risk speculators have no time to drill.

Strictly control the inflow of hot money into the market and reduce the credit risk of RMB.

Opinions and suggestions on rural informatization: rural informatization involves a wide range of applications, but the basic conditions are weak and it is difficult to do. I think the following aspects need to be considered:

First, * * * and the relevant departments of agriculture, rural areas and farmers should provide certain policies and make clear the phased information objectives;

Second, do a good job in the standardization of rural informatization.

Third, do a good job in the construction of information infrastructure to provide basic conditions for rural informatization;

Fourth, do a good job in training and publicity;

Five, choose the right projects and units to do a good job in the pilot, from point to area;

For information-based R&D enterprises, the focus should be on applications, fully tap the needs of users, and consider developing related products (which may involve software, hardware, platforms, etc. ) from the perspective of generating value for customers.