Implementation Plan for Safety Production Inspection

#Planning# The introduction plan is a plan that is specific, thorough and highly operable in terms of purpose, requirements, methods, methods, progress, etc. The following is a compiled implementation plan for safety production inspections, welcome to read!

Chapter 1 Implementation Plan for Safety Production Inspection

In order to implement the municipal government's "Notice on the Implementation Plan for In-depth Development of the "Safety Production Year" Activities" (Letter from the Shizheng Office [20xx] xx No.), the Municipal Safety Committee forwarded the xx Provincial Safety Committee's "Notice on Immediately Carrying out a National Safety Production Inspection" (Ji Safety Committee Biography [20xx] No. The Education Bureau decided to carry out a major inspection of school safety work, and specially formulated the implementation plan as follows:

1. Guiding ideology and work goals

Guided by the Scientific Outlook on Development, we adhere to the principle of "safety first, "Prevention first" policy, implement relevant instructions and requirements from superiors, and focus on investigating and rectifying hidden dangers in accordance with the content involved in "Three Advances and Twenty-six Preventions" to ensure the safety of all types of schools at all levels in our city.

2. Inspection time and method

This inspection will start on x, xx and end on x, x. It is carried out through a combination of self-inspection by each school, county (city), district inspection, and joint inspection organized by the municipal education bureau. The self-examination time of each school: from x month xx to x month xx, based on careful self-examination, fill in the "School Safety Work Hidden Hazards Checklist", sign it by the school principal and the principal in charge, and report it to the county (city) and district education bureau ; County (city) and district inspection time: x month xx to xx; city joint inspection time: x month xx to x month x day, and the directors and direct school supervisors of the county (city) and district education bureaus will be transferred The principal or the director or director of the safety department (department) will form xx inspection teams, which will be arranged by the Municipal Education Bureau. The division of inspection work is shown in Appendix 3. The inspection status of the Municipal Education Bureau shall be uniformly reported to the Safety Department of the Municipal Education Bureau by the inspection team leaders before x month xx; during the school self-inspection and county (city) and district inspections, the Municipal Education Bureau team will conduct random inspections of each school at any time If the inspection is not serious, the investigation is not in place, and the rectification is not timely, we must be notified and criticized.

III. Key inspection contents

(1) School fire protection facilities

1. Whether fire hydrants, fire extinguishers and other fire protection equipment are equipped according to standards and whether they can be used normally .

2. Whether the fire escape is clear.

3. Whether the wires and lines are aged or damaged.

4. Whether fire evacuation signs are set as required.

(2) School janitors on duty

The staffing of janitors must comply with regulations, duty registration, and clear signs for teachers and students to enter and exit. Resolutely prevent non-school vehicles from entering without permission. Irrelevant persons are not allowed to enter the campus or stay at the campus gate. Does the school designate a waiting area for parents as required?

(3) School canteen and food safety

1. Management of cooking staff.

2. Implement canteen duty, especially night duty.

3. Adhere to the incoming material certification system and control the import of incoming materials.

4. Food hygiene, keep food samples for possible follow-up investigation.

(4) School facilities and equipment

1. Whether there are dilapidated buildings in the school building.

2. Whether the management and use of school buses comply with safety regulations.

3. Whether the sports equipment and facilities are safe and suitable for use.

4. Storage of hazardous chemicals in the laboratory.

5. Whether all types of electrical equipment are safe to use.

6. School classrooms, laboratories, auditoriums, canteens, dormitories, toilets, swimming pools and other important places. In particular, effective preventive measures must be taken for school buildings that may be harmed by landslides, landslides, mudslides, and river water.

(5) Around the campus

1. Public security and order issues around the school.

2. Security issues at the school gate.

3. Food safety issues around campus.

4. The cultural environment surrounding the campus.

IV. Inspection requirements

(1) Attach great importance and organize carefully.

Each school must take immediate action in accordance with regulations and time limits, and quickly organize and carry out self-examination and self-correction work. The principals of each school must effectively assume the first responsibility. Each inspection team must carefully inspect each school they inspect, grasp the situation, find out the bottom line, discover safety hazards in a timely manner, and carefully fill in the inspection form supporting the "Three Advances and Twenty-six Preventions". Through various forms of inspections and rectifications, the school's safety work is more solid.

(2) Comprehensive rectification and supervision of implementation. Each school must conduct inspections and rectifications of potential safety hazards and weak links in work discovered during self-examinations, so that inspections can promote rectifications. If the school is able to rectify the problem on its own, it must complete it within a time limit; if the school has difficulties in rectification, it must be reported to each level and resolved within a time limit. Each county (city) and district education bureau must promptly inspect and supervise the implementation of rectifications. A timetable for rectifications must be proposed and the relevant responsible persons must be clarified.

Part 2 Implementation Plan for Safety Production Inspection

According to the spirit of the Teaching Secretary Document No. 20xxxx jointly issued by the Susong County Education Bureau and the Public Security Bureau, in order to further strengthen the primary school campus and To comprehensively manage the surrounding environment and resolutely prevent the occurrence of major safety accidents, this implementation plan was formulated after deliberation and decision by the Small and Medium-sized Administrative Conference.

1. Organizational Leadership

Team leader: xx

Deputy team leader: xx

Team members: xx

1. Building safety. Focus on checking the safety conditions of each completed primary school building (including building roofs, exterior walls, balconies, doors, windows, stair handrails, etc.), walls, toilets, etc., as well as water supply and power supply facilities, and check whether corridors, corridors and other passages are smooth and safe.

2. Fire safety. Focus on checking the implementation of the fire protection responsibility system in each small school, whether the fire exits in school teaching buildings, dormitories, office buildings, conference rooms, restaurants, laboratories, libraries and other crowded places are unobstructed, whether the fire protection equipment is up to standard and intact, and whether there is safety Hidden dangers and whether there is an emergency rescue plan.

3. Traffic safety. Focus on inspecting the safety of the vehicles that transport students to and from school in each primary school, the traffic safety conditions of students on their way to and from school, the safety measures for traffic thoroughfares passing through school gates, and the school's arrangement of teacher road teams to escort them, etc.

4. Food safety. Focus on inspecting the hygienic management of each canteen and the food hygiene conditions inside and outside the campus.

5. Safety education. Focus on inspecting the formulation of safety plans and safety drills in each small school, the implementation of safety education, and the safety education such as drowning prevention education, legal education, and mental health education carried out by the school.

6. Campus surrounding environment. Focus on checking whether there are Internet cafes, game arcades, cultural entertainment halls, bookstores, etc. around each elementary school, as well as other conditions that endanger students' physical and mental health.

7. Investigation and rectification of hidden dangers. Focus on checking whether the investigation of safety hazards in each small building is institutionalized and routine, whether a safety hazard ledger has been established, and the current existence of safety hazards.

3. Division of responsibilities

1. After each primary school is completed, team members shall first conduct self-examinations on the campus and surrounding environment, promptly rectify the problems found, and report them to the small and medium-sized safety work leading group.

2. The cadres of primary and secondary schools and the principal of the primary school will form a joint inspection team to inspect the affiliated schools one by one.

3. The central primary school safety work leading group organized school-by-school inspections of all primary schools in the township, and carefully filled out the "County Primary and Secondary School Campus and Surrounding Environmental Safety Inspection Form".

IV. Work Requirements

In addition to implementing the above safety inspection work in the near future, we should also regard it as part of the school's regular management work in future safety work. The most basic work to do. We now put forward the following requirements for safety work in the next semester.

(1) There must be a detailed safety work plan and include it in the school work plan; secondly, there must be detailed safety records, emergency plans, emergency drills, safety legal lectures, and clear Responsibility system; there must be a regular schedule for investigating potential safety hazards in the plan.

(2) Increase efforts to improve the surrounding environment. In the next semester, we will work with the public security organs to resolutely rectify the difficult-to-manage environment around the school.

(3) Stop tricycles from transporting students to and from school.

In the next semester, our slogan is "I would rather not start school than to eliminate safety hazards." We will resolutely regulate the vehicles used to pick up and drop off students, and require qualified vehicles with complete licenses to pick up and drop off students.

(4) Carry out the "Six Ones" activities. Under the guidance of the County Education Bureau, we will effectively carry out the "Six Ones" activities and eliminate all safety hazards.

Part 3 Implementation Plan for Safety Production Inspections

A few days ago, the State Council Safety Committee issued the "Notice on Carrying Out In-depth Safety Inspections to Effectively Do a Good Job in Safety Production in the Fourth Quarter" (Safety Committee Mingdian [20xx] No.

1. Overall requirements

Through comprehensive, in-depth and thorough inspections of production safety, we will further implement the main responsibilities of production safety enterprises, departmental supervision responsibilities and territorial management responsibilities, and comprehensively Investigate and manage potential safety hazards, severely crack down on illegal and illegal activities, promote enterprises to further improve and implement safety management rules and regulations, strictly implement safety operating procedures and standards, pay close attention to all safety production work, and resolutely curb the occurrence of various safety production accidents, Comprehensively complete all annual safety production targets and tasks.

2. Organizational Leadership

In order to strengthen the leadership of the town's safety production inspection work, a team was established with Secretary xx as the team leader, Deputy Mayor xx, Deputy Mayor xx, Deputy Mayor xx The town mayor serves as the deputy team leader, and the heads of each member unit of the town safety committee serve as members of the leading group to guide and coordinate the town's safety production inspection work.

3. Scope of Inspection

Production and business units in various industries in the town will be inspected, focusing on transportation, hazardous chemicals, fire protection, construction, fireworks, metallurgy and other industries and fields. .

IV. Inspection content

1. Implementation of the production safety responsibility system. The legal representative responsibility system of the enterprise and the establishment and implementation of the production safety responsibility system of the main person in charge, responsible person in charge, safety management personnel, and each position.

2. Implementation of production safety laws, regulations and standard procedures.

3. Establishment of safety production management institutions and the deployment of full-time (part-time) safety management personnel.

4. Establishment and implementation of safety management system and post safety operating procedures.

5. Safety supervision and inspection at the work site, implementation of the "three simultaneous" system for safety facilities in accordance with the law; safety supervision of external construction teams (contractors), etc.

6. Investigation and rectification of hidden dangers and monitoring of major hazard sources.

7. The intact condition and daily management and maintenance of important facilities and equipment for production safety of the enterprise; the intact condition and inspection and inspection status of storage containers and transportation vehicles of dangerous special equipment and dangerous goods .

8. Emergency management situation, provision of emergency rescue materials, formulation of emergency rescue plans and emergency drills.

9. Investigation, prevention and management of dangerous points around the enterprise or during operations that are prone to accidents caused by natural disasters.

10. Basic safety work and education and training. The certification status of the company’s main persons in charge, safety management personnel, and special operations personnel, as well as the education and training status of front-line production workers.

5. Inspection methods and time schedule

This major inspection focuses on self-examination and self-correction of production and business units in various industries. The town government organizes relevant departments to implement safety measures for production and business units. Conduct inspections and supervision on the responsibilities of production entities and self-examination and self-correction.

(1) Self-examination and self-correction stage (from now until xx, xx): All types of production and operation units must mobilize the masses of employees to seriously carry out self-examination and self-correction of the unit’s safe production conditions, and conduct Carry out a comprehensive safety inspection for each position and every link. We must implement the safety production responsibility system at all levels, carefully carry out self-examination, comprehensively and meticulously investigate and manage various accident hazards, strengthen preventive measures, and general hidden dangers discovered during the inspection must be Immediately instruct relevant personnel to make on-site rectifications. Major hidden dangers must be implemented with specific rectification time limits, measures, responsibilities, and plans, and included in the ledger management. Through major inspections, the company's daily inspection system will be further improved and the on-site management level of the company's workplace will be improved.

(2) Inspection and rectification stage (from xx to xx): Based on the self-examination of the enterprises, the town government will conduct a comprehensive inspection of the safety production status of the production and business units within its jurisdiction, and conduct Enterprises and industries where accidents are prone, frequent, and frequent will carry out key inspections, focusing on tracking and supervising rectification of major hidden dangers discovered in major inspections. If rectification cannot be completed temporarily, they will be included in the key supervision plan to ensure that rectification is in place. Please ask the town safety supervision office to conduct safety inspections of chemical enterprises, metallurgical casting enterprises, and fireworks and firecrackers; the enterprise management station and the park office to conduct safety inspections of industrial enterprises (except chemical industry, metallurgical castings, and fireworks and firecrackers) within their jurisdiction; and the police station to conduct safety inspections of civilian explosives in the area. and fire protection and safety inspections of crowded places; road traffic safety inspections by rural road offices, traffic police teams, police stations, and agricultural machinery stations; inspections of liquefied gas filling points by village and town construction service stations; safety inspections of projects under construction by construction management stations ; Civil and health inspections of food, student activities at school and school bus safety; Agricultural Road Office's special rectification of dock cranes; Agricultural Machinery Station's safety inspection of agricultural machinery; Water Pipe Station's safety inspection of the water conservancy industry summarized, and reviewed by the department head After signing, report to the Town Safety Committee Office before xx on xx.

(3) Town government inspection stage (from xx to xx): The party and government leaders will lead a team to supervise the safety production inspection of each line in charge.

VI. Work Requirements

(1) Comprehensive inspection, leaving no dead ends. In this major inspection, the main persons in charge of each production and operation unit must take the implementation of the company's main responsibility for safety production as the basis, carry out in-depth self-examination and self-correction, guide the safety responsibilities to be decomposed and implemented to each production link and position, and effectively complete the tasks We must make it clear, assign responsibilities to each person, and carry out inspections in place. In accordance with the requirements of "never miss a loophole, never lose a blind spot, and never leave a hidden danger", we conduct comprehensive safety production inspections. All villages and relevant departments must conscientiously implement their supervisory responsibilities and carry out supervision and inspections in a down-to-earth manner. They must not only pay attention to supervision and inspections in key industry areas, but also do a good job in surface inspections and spot checks. They must also pay attention to production front lines and workplaces. , inspection of production equipment, but also the inspection of safety systems, operating specifications, and personnel management to ensure that the safety production supervision network covers all regions, industry fields, and operating positions.

(2) Make rectifications thoroughly without leaving any future troubles. Each inspection team must conduct inspections carefully to detect hidden dangers, promote rectification, strengthen the foundation, and prevent accidents. The hidden dangers and problems discovered during the inspection must be classified and summarized according to the situation to ensure the "five-level" rectification measures, responsibilities, funds, time limits, and plans. in place”. Those that can be rectified immediately must be investigated and corrected immediately; if the conditions for rectification are not yet met, a rectification plan must be formulated, preventive measures must be implemented, a designated person shall be designated to monitor, and rectification must be completed within a time limit; if the hidden dangers are serious and safe operations cannot be guaranteed, enterprises and retail units must be ordered to suspend operations. Rectification, if the rectification is not in place, operations shall not be resumed.

Part 4 Implementation Plan for Safety Production Inspection

In accordance with the "xx City Safety Production Inspection Implementation Plan" and the "xx New District Safety Production Inspection Work Plan" and The overall requirements of the "XX New District Hangu Safety Production Inspection Work Plan". Based on the actual situation of our town, the "Implementation Plan for Safety Production Inspection in Yingcheng Town" was specially formulated.

1. Overall requirements

By conducting in-depth safety production inspection activities throughout the town, we will promote the implementation of the safety production responsibility system, consolidate the "double base" work of safety production, and strictly Crack down on violations of laws and regulations, effectively solve weak links and outstanding problems in production safety, promote enterprises to further improve the implementation of various safety rules and regulations, conduct in-depth and thorough investigations of hidden dangers of accidents, resolutely curb the occurrence of various accidents, and promote the continued stability of the safety production situation in the town.

II. Inspection Scope and Division of Responsibilities

This major safety inspection should be based on the actual situation of our town, focusing on the safety production situation of chemical enterprises, fishing vessels, construction and other aspects.

A leading group for the town’s safety production inspection work was established, with Li Pengzhu, deputy secretary of the party committee and mayor of the town, as the team leader; deputy mayors Zhang Guangfu, Liang Riyun, Zhang Xiying, and trade union chairman Wang Guichun as deputy team leaders; the government office and the agricultural office , Industrial Office, Comprehensive Management Office, Culture and Education Office, Police Station, Border Defense Station and other departments are member units; each village (neighborhood) committee and enterprise unit establishes corresponding organizations, and the legal person of the unit is responsible for organizing the specific implementation, referring to the safety production inspection of the relevant district departments Division of responsibilities and organization of safety production inspection activities in the region.

3. Main contents

(1) Enterprise aspects

On the basis of a comprehensive inspection of x enterprises within the jurisdiction, focus on checking whether the enterprise project engineering design Comply with safety regulations, whether safety procedures and management systems are established and improved, whether safety requirements and job responsibilities are implemented in place, and whether there are any hidden dangers in technical equipment, operating environment, prevention and control methods, etc. Specifically include:

1. Implementation of the production safety responsibility system. The legal representative responsibility system of the enterprise and the establishment and implementation of the production safety responsibility system of the main person in charge, responsible person in charge, safety management personnel, and each position.

2. Implementation of production safety laws, regulations and standard procedures. The situation of the deployment of full-time (part-time) safety management personnel; the establishment and implementation of technical equipment safety management systems and job safety operating procedures; the situation of safety supervision and inspection at work sites; the safety formulation and implementation of new construction, reconstruction, and expansion project designs, and the implementation of safety regulations in accordance with the law The "Three Simultaneities" system of facilities; the safety supervision of external construction teams (contractors), etc.

3. Investigation and rectification of hidden dangers and monitoring of major hazard sources. The integrity and daily management and maintenance of important facilities and equipment for enterprise safety production; the integrity and inspection status of storage containers and transportation vehicles for hazardous special equipment and dangerous goods; and the inspection and inspection status of production sites with relatively high risk factors. The construction and implementation of the survey and archiving of major hazard sources, risk identification, monitoring and early warning systems for business premises and key links and parts, and the implementation of measures.

4. Emergency management situation. Agreements signed to establish a full-time (part-time) emergency rescue team or related emergency rescue teams; equip emergency rescue materials, formulate emergency rescue plans and emergency drills; monitor the dangers of accidents and disasters that exist around the enterprise or during operations that are easily caused by natural disasters Point investigation, prevention and management status, etc.

5. Basic safety work and education and training. The status of the certificated employment of safety management personnel and special operations staff, the education and training status of production frontline workers (including migrant workers), as well as labor organization, employment, etc.

6. Effectively strengthen enterprise self-examination. Each enterprise must form a self-examination report, which shall be signed by the person in charge for future reference.

(2) Key parts

Hazardous chemicals: Focus on investigating problems in safety devices of production facilities and equipment, long-distance pipelines, pressure pipelines, and production, storage, transportation, use and other links. and hidden dangers, and strictly guard against accidents such as leakage, explosion, poisoning, etc.; carefully inspect construction operations in sewage treatment, dredging, underground pipelines and restricted spaces, and strictly prevent hydrogen sulfide poisoning accidents in spring.

Construction construction: implementation of the "three simultaneous" system for safety facilities in new construction, reconstruction, and expansion projects; construction project scaffolding erection, shared space and complex structural engineering, color board houses for migrant workers' accommodation, and bridges Investigation of hidden dangers in hoisting operations, road and bridge paving operations, etc., to prevent falls from heights, collapse, and collapse.

Places with densely populated areas: Establish and implement the fire safety responsibility system, fire safety system, and operating procedures for fire safety, and clarify the fire safety manager of the unit; rectify the construction of places with densely populated areas, high-rise buildings, underground buildings, and projects under construction Fire hazards in key places such as construction sites and “three-in-one” and “multi-in-one” production and business units.

Fishing vessels: Fishing vessels can only operate with a vessel inspection certificate, vessel registration certificate, and fishing license (fishing vessel); fishing vessels are fully equipped with communication, life-saving, fire-fighting, and signaling facilities and equipment and are operating normally; strengthen Vocational skills training and education for fishery crews, fishery crews must hold certificates to work; fishing vessels strictly implement various navigation operation rules and procedures, etc.

IV. Schedule

(1) Refined plan, self-examination and self-correction stage (from x, x to x, xx)

Each enterprise . The village committee should combine its own actual situation and the outstanding problems existing in work safety to formulate a work plan for safety production inspection. It should clarify the goals, implement responsibilities, refine requirements, strengthen measures, and conscientiously organize and mobilize work in accordance with the requirements. , mobilize all employees of the enterprise, the entire process, and all-round self-examination and self-correction, implement rectification measures for the hidden dangers and problems discovered during the investigation, and make timely rectifications. And before June xx, a comprehensive summary of the self-inspection situation of this safety production inspection activity will be submitted in writing to the town safety committee office.

(2) Supervision and inspection, comprehensive promotion stage (from x, x to x, xx)

The town safety committee will implement dynamic management of the process of this major inspection activity and will Organize an inspection team to supervise the safety inspections carried out by each enterprise and village committee, conduct special spot checks on the progress of safety production inspection activities by each enterprise and village committee from time to time, and conduct special spot checks on enterprises and industries with frequent accidents (Field) Conduct key inspections and conduct a comprehensive summary of safety production inspection activities.

5. Work Requirements

(1) Strengthen leadership and implement responsibilities. Relevant departments of all enterprises and village committees must conscientiously implement the legal representative responsibility system of the enterprise, decompose the tasks of major inspections at each level, and assign responsibilities to people; they must act immediately, take effective measures, and implement arrangements and deployments at every grassroots level. units, and strengthen supervision, inspection and guidance.

(2) Organize carefully to achieve practical results. Relevant departments of all enterprises and village committees must formulate practical inspection plans in accordance with the inspection content, key areas and inspection methods required by this "Plan", make careful arrangements, refine tasks, implement responsibilities, improve methods and methods, and enhance pertinence and Effectiveness, conduct inspections immediately in accordance with the principles of "who is in charge, who inspects, who is responsible" and territorial management, implement inspection responsibilities, and avoid going through the motions. We should take this major inspection as an opportunity to further strengthen safety supervision, deepen safety rectification, and lay a solid foundation for safety production work.

(3) Conduct in-depth inspections and make timely rectifications. Adhere to inspections and rectifications at the same time to promote rectifications through inspections. For hidden dangers and problems discovered during the inspection, if they can be rectified, effective measures must be taken immediately to rectify them; if the hidden dangers cannot be rectified immediately, preventive measures must be formulated and implemented, and special personnel must be designated to keep watch, and rectification and follow-up must be carried out within a time limit; for serious hidden dangers, safety cannot be guaranteed Production and business units must be ordered to suspend production and business for rectification. The town safety committee set up a special inspection team to conduct inspections in various enterprises and village committees to ensure that no formalities were left and no dead ends were left.

(4) Extensive publicity and supervision by public opinion. All enterprises and village (neighborhood) committees should make full use of broadcasts, showcases, slogans, etc. to widely publicize the goals, content, and requirements of this safety production inspection activity, improve ideological understanding, popularize safety production knowledge, and increase public opinion supervision and mass supervision. Strengthen supervision and create a good public opinion atmosphere for safety production inspection activities. Further improve the hidden danger reporting system, carefully verify the reported accident hazards, supervise the implementation of rectifications, and provide appropriate rewards to the whistleblowers.

All enterprises and village (neighborhood) committees must carefully analyze and promptly solve the problems discovered during the inspection of production safety; make timely summaries to promote the in-depth development of the work, and summarize the relevant work situations in Report to the town safety committee office before x month xx day.