A carton factory production management system is urgently needed, thank you, bonus 100.

The * * * paper mill safety production management system "

First, the safety education system

1. Factory-level leadership training system: including the factory director and deputy factory director, they must accept safety training courses organized by the safety production supervision and management department.

2. Safety production management personnel training system: Safety management personnel should straighten out the relationship between safety and production and operation, learn and master safety management knowledge, obtain safety qualification certificates, and ensure that they are trained at least 1-2 times a year.

3, homework personnel training system:

Second, the safety inspection system

1. Factory-level leadership training system: all factory directors must accept safety training courses organized by the safety production supervision and management department and obtain the factory director's safety qualification certificate after examination.

2. Training system for safety production management personnel: safety management personnel should correctly adjust the relationship between safety and production and operation, learn and master safety management knowledge, obtain safety qualification certificates, and ensure at least 1-2 trainings every year.

3. Training system for all kinds of operators: In addition to general safety education, special operators must receive specialized technical training from relevant professional departments and obtain qualification certificates for special operations before taking up their posts. Those who have obtained the certificate can participate in the training, examination and assessment organized by professional departments as required.

4. New workers' safety training system: New workers should receive safety education and training, work under the leadership of employees with safety work experience, and work independently after being skilled.

5. Safety education system for all employees: All production workers should receive 1-2 on-the-job safety education and training every year.

6, "four new" safety education system, the use of new technologies, new equipment, new materials for production, the necessary safety education for employees.

Third, the safety production program system

This system is formulated in order to enhance the safety awareness of enterprises, strengthen the safety responsibilities at all levels, and prevent all kinds of serious accidents.

1. The scope of safety discussion includes all departments and production posts of the company, as well as all issues related to safety production.

2. The main person in charge of safety discussion is the deputy director in charge of safety, and the participants include factory leaders, safety section chief and related personnel.

3, the time and content of the meeting is inconsistent with the factory, by the participants to their own jobs or other jobs that are not conducive to safety in production.

4. According to the suggestions made by the safety production inspector and the detected factors, put forward specific preventive measures and submit them to relevant departments for implementation.

5. The competent safety department is responsible for convening, recording and tracking the implementation after the meeting.

Four, the duty management system (night and holidays)

1. Duty time: The night shift personnel will be arranged by the management department (on duty), from 8: 00 pm to 6: 00 am.

2, foremen should fill in the duty record every day, with a pen or ballpoint pen, legible. The shift supervisor will directly notify the responsible department of the problems that appear on duty for rectification. It is also necessary to verify whether the problems that occurred the day before have been rectified and write the rectification clearly.

3. During the duty, inspect the factories, production workshops and key parts, and sign the inspection records as inspection marks.

4. The personnel on duty must arrive at their posts on time. If the personnel on duty can't get to work due to objective reasons, it can be solved by changing shifts or shifts, but it must be approved by the competent leader. Due to objective reasons, the team leader can't change shifts on his own and can't take time off.

Five, equipment safety management system

1. Establish equipment management rules and regulations based on post responsibility system, and implement the equipment management responsibility system. Main equipment should be fixed in three ways: personnel, machines and responsibilities.

2, strengthen the technical training of equipment operation and maintenance personnel, equipment operation procedures.

3, equipment defects, post operation and maintenance personnel should immediately eliminate, and make maintenance records.

4, post operators can't eliminate equipment defects, to immediately find equipment maintenance personnel to take measures.

5. Operators of special equipment must hold the operation qualification certificate of special operators.

6. Equipment accidents caused by illegal operation and dereliction of duty of equipment management personnel shall be dealt with in different degrees according to the seriousness of the case.

Six, fire control facilities, equipment maintenance management system

1. The full-time administrator is responsible for the daily use and management of fire-fighting facilities, and the full-time administrator checks the use of fire-fighting facilities every day to keep the facilities clean, hygienic and in good condition.

2. The centralized management department is responsible for the maintenance and regular inspection of the technical performance of fire-fighting facilities and fire-fighting equipment, and has a full-time administrator to check and understand the operation of fire-fighting facilities on time every day. Listen to the opinions of the personnel on duty, and take timely measures to keep the fire control facilities in good condition if any abnormal situation is found.

3, fire control facilities and fire equipment should be tested regularly.

4, every year in February on a regular basis for fire extinguishers census dressing change.

5, assign personnel to manage, regularly check the fire equipment, to ensure that it is in good condition.

6, fire fighting equipment should be checked regularly, found lost, damaged should immediately supplement and report to the leadership.

7. The fire-fighting equipment of each department shall be managed by this department, and a special person shall be appointed.

Seven, safe electricity management system

1, power distribution management personnel shall attend training regularly according to the superior competent department and hold relevant certificates.

2, distribution management personnel shall not carry out any electrical work, violators will be punished according to the seriousness of the case.

3. It is forbidden to set up temporary lines at will. If temporary lines need to be erected due to production or maintenance, electricians shall operate and be responsible for them according to the specifications, and dismantle them at the expiration.

4, all electrical equipment (including transformers, motors, switches) and production equipment must have protective grounding.

5. It is forbidden to pile up sundries near the distribution room and electrical equipment, and keep the surrounding clean.

6, all electrical switches, socket equipment specification, no defect, switch box in good condition.

7. It is forbidden to place semi-finished products or finished products next to the power distribution cabinet in the workshop. The inside of the power distribution cabinet should be clean and free of sundries.

Eight, production safety accident report management system

1. After an industrial accident, the injured or the first person to find it must immediately report to the workshop director and other relevant leaders.

2, after the industrial accident, first of all, to organize the rescue of the wounded, to prevent the accident from developing and expanding.

Nine, major hidden dangers rectification system

1. A strict safety management system shall be established for major safety hazards, which shall be eliminated through rectification and strict control.

2. In areas with potential safety hazards, obvious safety warning signs should be set before rectification.

3, the parts prone to hidden dangers, check at least once a month, and make inspection records.

4, the larger security risks found in the inspection, to timely rectification, designated by the factory director to the factory director is responsible for, in conjunction with the relevant departments to specify the rectification plan, rectification within a time limit, and acceptance.

5. Formulate emergency rescue plans, regularly check and evaluate the effectiveness of emergency rescue plans, and revise them when necessary.

6, the establishment of accident emergency rescue leading group and institutions, headed by the factory director.

X. Accident reporting and handling and safety reward and punishment system

1. After the accident, the parties or discoverers of the accident should immediately report the place, time, unit, course of the accident, preliminary estimation of direct economic losses, preliminary judgment of the cause of the accident, measures taken after the accident and accident control, and the accident reporting unit to the relevant departments and leaders, and can call the police in case of emergency.

2, due to safety accidents, resulting in serious injuries, major and secondary accidents, should promptly report to the competent authorities.

3, accident investigation and handling should adhere to the principle of "four pass", that is, the cause of the accident is not found out; The person responsible for the accident has not been dealt with; Employees without education are not immune; There are no precautions.

4, due to neglect of production safety, illegal command, illegal operation, violation of labor discipline caused by the accident, according to the seriousness of the responsible person and the person responsible for the accident shall be given administrative sanctions and economic penalties, which constitute a crime, criminal responsibility shall be investigated by the judicial department according to law.

5. After the accident, those who conceal, make false reports, deliberately delay reporting, deliberately destroy the scene or refuse to accept and provide relevant information and materials without justifiable reasons shall be given economic punishment or investigated for criminal responsibility.

6, after the accident, must be investigated, the general accident by the head of the department to investigate, and report the results to the security department and relevant leaders, for major accidents, the security administrator should actively cooperate with the public security bureau, safety supervision department, fire department to investigate, until the end of the investigation.

7. Establish accident handling files, and register the place, time, department, brief course of the accident, cause of the accident, measures taken after the accident, accident control and handling results.

Reward and punishment: 1. Every time departments and individuals who violate safety management regulations without accidents are found, the leaders will be fined 100 yuan; Responsible person 200 yuan

2. 200 yuan, the head of the department, and 400 yuan, the responsible person, were fined1000-5,000 yuan for the accident.

3. If the accident is 5000- 10000 yuan, 500 yuan, head of the punishment department, and 1000 yuan.

4. If the accident 10000 yuan or more, the department leader will be fined 1000 yuan, and the responsible person will be fined 2000 yuan. And give administrative sanctions or dismissal to the department. Delete the name of the person in charge. Those who have accidents due to dereliction of duty should be called hell to pay, and those who violate the criminal law should be investigated for criminal responsibility according to law.

XI。 Management system of labor protection articles

Labor protection articles are necessary preventive articles to protect workers' personal safety and health in the production process, and are the last line of defense to protect workers' safety and health. Providing qualified labor protection articles for workers is the responsibility entrusted by law to production and business units, which reflects the respect of the state and production and business units for the life and health of workers.

1 plan

Each unit shall submit a monthly plan to the company's safety management department according to the distribution scope, standard, variety and quantity of labor protection articles for employees in Hebei Province, and the company's safety management department will issue a procurement plan after summarizing.

2 procurement

The safety management department of the company is responsible for the procurement of labor protection articles, which should be purchased at designated locations. The purchased and equipped labor protection articles must have "three certificates", that is, product certificate, safety appraisal certificate and labor protection articles production license.

3 storage and distribution

The safety management department of the company is responsible for the storage and distribution of labor protection articles, and keeps the storage and distribution records.

4. Financial guarantee

The finance department is responsible for ensuring the purchasing funds of labor protection articles, and providing workers with labor protection articles that meet the national or industry standards on time and in full for free.

5 the use of labor protection articles

Every employee should take good care of personal labor protection articles and wear and use them correctly according to regulations.

6 Replacement and scrapping

Labor protection articles should be replaced in time after the expiration of service; Some special labor protection articles should be inspected and tested regularly according to the standards. Labor protection articles that fail to meet the safety requirements after inspection and testing should be replaced and scrapped in time and should not be used any more.

7 supervision and inspection

The trade union and safety management department of the company are responsible for supervising and inspecting the planning, procurement, acceptance, storage, distribution, use, replacement and scrapping of labor protection articles, educating employees to wear and use labor protection articles correctly and reasonably, and punishing those who do not wear and use labor protection articles according to the provisions in addition to education, according to the company's safety production assessment methods and relevant regulations.

Twelve. Management system of inflammable and explosive places

1 Flammable and explosive places refer to places where there are fire and explosion risk factors in the process of production, storage and use, which are likely to cause personal injury and material loss.

2 Flammable and explosive places must be provided with obvious fire and explosion warning signs. The responsible unit shall conduct regular and regular inspections to eliminate hidden dangers in time.

3. In inflammable and explosive places, the person in charge of the post should be clearly defined, and the fire control facilities and equipment must always be kept in good condition, so that the class can be used in class.

4 In places with explosion danger, the motor and lighting should be explosion-proof. Sparks or fires caused by poor contact, overload or overheating should be avoided. Lightning protection devices should be set correctly, and safety lights should be used for maintenance lighting to avoid mechanical impact.

5. Flammable and explosive places should strictly abide by the fire and explosion prevention system. Smoking is strictly prohibited in the explosion danger zone. It is forbidden to use open flame to keep warm, and it is forbidden to burn flammable materials. It is forbidden to install electric heating equipment in the explosion-proof area.

6 Flammable and explosive places should be equipped with perfect safety devices, such as installing alarms and safety valves on pressure vessels. Safety devices shall be maintained and inspected according to regulations and kept in good condition.

7. Flammable and explosive articles should be used and stored in places where fireworks are strictly prohibited, and all possible fire hazards should be strictly eliminated.

8. The transportation, storage, use and waste disposal of inflammable and explosive articles must be equipped with fire-proof and explosion-proof facilities, and the safety operation procedures and the safety regulations for the fixed and quantitative varieties must be strictly implemented.

9. Strengthen the management of combustible materials. Bulk combustible materials must be stacked according to varieties; Flammable substances such as alcohol, liquor, paint and methanol should be properly kept away from fire sources.

10 inflammable and explosive places 10 meters, fireworks and temporary wires are strictly prohibited. If it is really necessary to erect temporary wires, the company's approval system for temporary electrical wires shall be strictly implemented.

1 1 Pressure vessels and pipelines should be thoroughly cleaned and replaced before welding and cutting, and the content of combustible liquid and gas should be less than 2 times of its lower explosion limit after testing; Enter containers and pipelines for welding repair and cutting. The oxygen content in containers and pipelines should be greater than 19%, and containers and pipelines should be monitored by designated personnel.

12 when hot work is really necessary in flammable and explosive places, the company's fire safety management and dangerous operation approval monitoring system should be strictly implemented.

Thirteen. Occupational safety and health education system

1 In order to improve the safety technical quality of employees, prevent casualties and reduce occupational hazards, it is necessary to strengthen safety education and training at all levels.

2. The Safety Management Department implements comprehensive management of the company's safety education and training, and exercises supervision and inspection functions.

3. Incorporate the company's safety education into the company's annual training and education plan and long-term planning, and the required personnel, funds and materials should be fully guaranteed.

4. All units should take the form of meetings, posters, posters and photo exhibitions to do a good job in safety education for employees.

5. The company shall establish and improve the safety education and training files, which shall be managed by the safety management department.

6, new workers must accept the company, workshop, team level 3 safety education, and after passing the examination rear can mount guard, level 3 safety education time shall not be less than 24 hours.

7. Company-level safety education is organized and implemented by full-time safety management personnel of the company's safety management department. The education contents include: basic knowledge of safety production; The company's safety production rules and regulations; Labor discipline; Risk factors, preventive measures and accident emergency measures existing in workplaces and jobs; Related accident cases, etc.

8. Workshop-level safety education shall be organized and implemented by full-time safety officers in each workshop. The contents should include: the safety production situation and rules and regulations of this workshop; Risk factors, preventive measures and accident emergency measures existing in workplaces and jobs; Accident cases, etc.

9. security team education is organized and implemented by each team leader. The contents should include: post safety operation procedures; Performance and correct use of production equipment, safety devices and labor protection articles (appliances); Accident cases, etc.

10, special operations personnel must accept the special safety training of the competent department, and obtain the operation certificate of special operations personnel after passing the examination.

1 1. The safety management department of the company organizes training and education for managers above the team leader once a year, and they can only take up their posts after passing the examination.

12, each workshop conducts safety education for all employees in the workshop once a month, and the team insists on conducting safety education for all employees once a week, and makes records carefully.

13. When employees adjust their jobs or return to work after leaving their posts for one year, they must pass the corresponding safety education at the workshop and team level.

14. Occupational health education is divided into pre-job health education, on-job health education and off-job health education. The contents of occupational health education include: national guidelines, policies and regulations on occupational health; Occupational health and occupational health knowledge; Knowledge of prevention and control of key occupational harmful factors; Emergency treatment and personal protection knowledge of unexpected accidents.

Fourteen, safety accident reporting and investigation and handling system

A, safety accident report

After the accident, it shall immediately report to the safety production supervision and management department of Anci District, Mingzhu Group Company, relevant departments and trade unions within the time limit.

The accident report shall include the following contents:

1, the time, unit, place and site of the accident;

2, the brief history of the accident, the number of casualties (including the number of people unaccounted for) and the preliminary estimate of direct economic losses;

3. Type of accident;

4. Preliminary analysis of the cause of the accident;

5. Measures taken after the accident;

6, the accident reporting unit and its main person in charge;

7. If the accident situation changes, it shall be reported in time; If the injured person dies within 30 days after the injury, it shall report it in time;

8. The production and business operation entity shall timely and truthfully report the casualty accident, and shall not conceal, falsely report or delay the report.

B, the investigation and handling of safety accidents

1. Set up an accident investigation team mainly responsible for Yonghua Store to organize accident investigation.

2. All units and individuals must provide all convenient conditions for accident investigation, and shall not obstruct or interfere with accident reporting, investigation and handling.

3. The accident investigation and handling are as follows: (1) Find out the cause and nature of the accident; (2) those responsible for the accident shall be dealt with severely according to law; (3) Educate the persons responsible for the accident, the persons in charge of the production and business operation units and the broad masses of workers; (4) Implement corresponding preventive measures.

4. The accident investigation team has the following responsibilities:

(1) Find out the accident situation, casualties and economic losses; (2) Find out the cause and nature of the accident; (three) to identify the responsibility for the accident and put forward suggestions for handling the person responsible for the accident; (4) Summarize the lessons of accidents and put forward measures and suggestions to prevent accidents; 5] Put forward the accident investigation report.

5, accident investigation report and accident treatment opinions

The accident investigation report shall include the basic information of the accident unit, the time, place, process and rescue of the accident, casualties and economic losses, and the list of members of the accident investigation team.

The accident handling decision or opinion shall include the following contents:

(1) The nature of the accident; (2) Liability for accidents; (3) the decision or opinion on the handling of the unit responsible for the accident and the relevant responsible personnel; (4) Accident prevention measures and rectification measures.

Fifteen, major hazard safety inspection, monitoring management system

A, electricity safety inspection system

1. The personnel on duty in the transformer room should check the transformer and high and low voltage cabinets once per shift and make records. If any abnormality is found, it shall be handled in time or reported to the competent leader;

2. The electrician safety inspector should check the electrical facilities in the store once a day and make records. If any abnormality is found, it shall be handled in time or reported to the competent leader;

3. All business departments in the store have electrical appliances for repair, and the electrician class should go to the site for treatment within 10 minutes;

4. The transformer and power distribution equipment are overhauled and cleaned twice a year, and records are made;

5. Each business department of the mall shall check the electrical appliances used four times a day and make records, and the property electrician shall supervise the electricity consumption inspection of the business department;

6. The electrician in charge shall check the area in charge once a day, and handle any hidden dangers in time;

7. To operate an electrician, you must have a "special operation certificate".

B, elevator safety inspection, supervision and management system

1. All elevators must be applied for on schedule, and can only be operated after the annual inspection by the safety production management department and the annual inspection certificate is obtained.

2. Operators and maintenance personnel must be trained to obtain the Operation Certificate for Special Operators before taking up their posts.

3. In strict accordance with the provisions, timely refuel and maintain the elevator.

4, every three months to conduct a comprehensive inspection of the elevator, adjustment, and record.

5, according to the provisions of the maintenance cycle, maintenance and record. Overhaul should be reported to the safety production management department for testing.

C, central air conditioning safety inspection management system

1, the personnel on duty should check the gas pipeline before starting (normal pressure, air leakage).

2. Patrol every hour when starting the machine, and take effective measures immediately if any faults such as air leakage are found.

3. After parking every day, the pipeline shall be systematically inspected with a special leak detector.

4. Contact the gas company regularly to test and maintain the gas pipeline.

5, air conditioning host once a quarter downtime maintenance, to ensure trouble-free operation of equipment.

6. The personnel on duty should always check whether the fire alarm linkage system is normal.

There are also various job responsibilities and production processes. Please visit the following website, I hope it will help you!

/sxzd/News_View.asp？ NewsID = 12359 & amp； page 2