Summary of Safety Officers' Work in Non-high-risk Industries

Work Summary of Safety Officers in Non-high-risk Industries (5 selected articles)

Time goes by, and the work for a period of time has ended. Looking back on the work during this period, I must have made a lot of achievements, which means that I have to prepare to start writing the work summary again. So how to summarize the work and write new tricks? The following is a summary of the work of safety officers in non-high-risk industries (selected 5 articles) that I have carefully compiled. Welcome to read and collect.

summary of safety personnel's work in non-high-risk industries 1

in August, our company strictly implemented the responsibility system for production safety and worked hard to eliminate potential safety hazards in the work. In order to find out the base number and eliminate potential safety hazards, we have carefully organized and carried out mine supervision and inspection activities, made mine safety monitoring the highlight of industry management, and made every effort to do a good job. During the main flood season, we always stood at the height of maintaining stability and promoting development, proceeding from safeguarding the fundamental interests of the people, and aiming at the characteristics of mine safety production in flood season, we have carefully found out the existing weak links and problems, formulated practical and effective measures, and made a solid grasp of the safety production in flood season, so that the mining area can The safety work in August is now reported as follows:

1. Safety education and training

Strengthen the training and education on safety management knowledge, safety operation procedures, safety operation skills and special operations of special operators in the whole company and all construction units. This month, informed by the county public security unit, we focused on the professional skills training of explosion-related safety officers, warehouse keepers for obtaining evidence and blasting operators, urged 2 construction units to participate in special work training and certification, and organized 4 explosion-related safety officers and warehouse keepers of the Ministry of Mines to participate in certification and inspection, so that the rate of holding certificates reached 1%.

II. Safety inspection and rectification of hidden dangers

This month, the Notice on Carrying out Special Safety Inspection of Non-media Mining Enterprises and Metallurgical Enterprises issued by the County Safety Supervision Bureau was seriously implemented and rectified. During the inspection, we strengthened the inspection of hoisting system, safety exits, mechanical ventilation facilities and electromechanical equipment. While doing a good job in prevention and control, we found hidden dangers and rectified them in time, without going through the motions and leaving blind spots, and defined the responsibility objectives one by one. This month, the company's competent leaders personally led the team, organized geological experts and relevant departments to carry out major inspections for 6 times, and the Safety and Environmental Protection Department went to various construction teams for 21 times, and issued 12 notices of rectification of potential safety hazards, involving 7 potential safety hazards, and made sure that the rectification had an account, rectification contents, rectification measures, rectification time limit, signature of the person in charge of the rectified unit and rectification results, including 33 potential safety hazards on the spot. After reviewing the remaining 37 safety hazards, except for one safety hazard (there is water in the main roadway in the middle section of pd98) which is being rectified, the remaining 36 safety hazards have reached the rectification requirements, and the rectification rate is 97%.

III. Flood control work

From the night of xx to the early morning of xx, X month, there was a sudden heavy rain, which was concentrated and heavy, which was rare for decades. Attacked by heavy rain, rivers in my mining area, xxx mining area and major rivers in xx mining area generally flooded, causing sudden floods. After the disaster occurred, we actively responded. The flood control headquarters of the company: xxx started the emergency rescue plan for flood control of xxxx Mining Co., Ltd., studied and deployed flood control and disaster relief work, and dispatched relevant departments and personnel to xxx mining area and xx mining area to carry out flood control and rescue work. During the main flood season, our company keeps abreast of the weather conditions, pays close attention to the water situation, ensures that the information is uploaded and issued in time, and tries every means to eliminate the dangerous places in time. It has organized 12 times of flood control and rescue, dispatched more than 21 rescue workers, dispatched loaders and vehicles on duty for more than 23 times, used more than 7 woven bags and built more than 8 meters of protective weirs. And issued a notice to all units, requiring all units to eliminate carelessness, always be vigilant, and prepare for flood fighting and disaster relief at any time to ensure personal and property safety. Due to the implementation of various emergency measures, the company's cadres and workers actively promoted the smooth development of various flood control work with a good attitude and solid work style, and reduced the disaster and danger to a minimum.

fourth, the next work plan

1. Continue to strengthen the safety education and training for all units, so that the safety awareness is deeply rooted in the hearts of the people and the phenomenon of "three violations" is put an end to.

2. Actively carry out various safety inspections and major investigations of hidden dangers, implement the system of rectification and review of hidden dangers, solidly promote safety work, and ensure production safety.

3. Strengthen the routine maintenance of lifting system, power supply system, ventilation and drainage system, wire rope, rope buckle, tank guide and fall arrestor.

4. Strengthen the inspection of the account, so that all units can record and fill in the account in a timely, earnest and standardized manner.

5, strengthen vehicle safety management, frequent maintenance.

6. Implement various measures of "Three Preventions in Rainy Season" (flood prevention, drainage prevention and lightning protection), and strictly implement the system of 24-hour duty and leadership shift in flood season to ensure safe flood season. Work summary of safety personnel in non-high-risk industries 2

1. Safety basic management

1. Check the construction account of security team this month, which can be completed on time. The detailed appraisal is attached.

In February and March, security team Checklist, Workshop Weekly Checklist and Team Monthly Checklist were all completed on time. The problems found out and the parts that can be rectified have been rectified in the workshop; A small number of them have not been rectified, and they have made plans for rectification and timely feedback;

3. This month, we will continue to carry out the related contents of "Safety Production Standardization Activities";

4. do a good job of "factory-level" safety education for new employees and employees who have changed jobs;

II. On-site inspection

1. No problems were found in the daily spot check of special operation tickets in the factory;

2. Strengthen the safety management of on-site inspection to realize safety maintenance;

3. Tomb-Sweeping Day has conducted pre-holiday safety inspection to ensure safety in production;

III. Various accidents

No accidents this month

IV. Safety production objectives

1. No major fire, explosion or poisoning accidents this month

2. No industrial accidents this month;

3. The injury rate per thousand people this month is ‰;

v. Safety activities

1. Carry out the work related to the activities of "Safety Production Competition" and "Hundred Days Safety Production Accident-free Competition" throughout the year;

VI. Main work plan for April 2xx

1. Supervise the efforts and progress of rectification of potential safety hazards;

2. Pay strict attention to the correct wearing of labor protection articles and the work of on-site standardization;

3. Continue to implement the safety checklist, weekly safety checklist, risk analysis of inspection and maintenance, hazard identification and "three-determination" checklist of hazard sources, etc.

4. Organize and carry out the annual "Safety Production Competition" and the first "One Hundred Days of Safety Production without Accidents" competition in 2xx;

5. Collate and update the 2xx-year safety standardization documents;

6. Strengthen the safety supervision and management of foreign learners;

7. Continue to do a good job in safety and fire control assessment; Summary of Safety Officer's Work in Non-high-risk Industries 3

"Being a qualified safety officer" is the pursuit goal of my current job. Since shouldering the heavy responsibility of safety officer, I have always kept a clear head and treated my work with a diligent and down-to-earth attitude. After serving in my current position for one year, I have strictly followed the work objectives set at the beginning of the year, comprehensively implemented the policy of "safety first, prevention first" and strengthened the management of safety production. Under the correct leadership of the company, with the trust and support of the leaders, I cherish this security role very much and put myself into work with a positive attitude. This year's work has been a very fulfilling year. The work in the past year is summarized as follows:

Assist department leaders to establish and improve the company's safety production management system according to the company's requirements, current actual situation and current safety production situation. The establishment of these systems not only meets the inspection requirements of higher authorities, but also facilitates the safety management of the company.

under the correct leadership of the leaders in charge of safety work, carefully supervise the safety functions of the equipment and personnel in the production and operation areas, put an end to the habitual violations of the operators and resolutely punish other safety violations during the planning, arrangement, inspection, summary and assessment of safety production, so that they can master the major hidden dangers and weak links that threaten safety production.

assist department leaders to seriously implement the responsibility system for production safety, regularly attend workshops before and after work, strengthen the publicity and communication of relevant laws and regulations on production safety and accident cases, do a solid job in safety training, and firmly fulfill the commitment in the Responsibility Letter for Production Safety to ensure the smooth realization of the company's production safety objectives.

Earnestly carry out the work of "Safety Production Month". In the annual national "Safe Production Month" activities, employees were organized to take the oath of safety for 1 people, launch the safety month ceremony, post safety propaganda slogans and other forms to publicize the importance of safe production, enhance employees' awareness of safe production, and really make them change from "I want to be safe" to "I want to be safe".

actively carry out hidden dangers investigation, and earnestly realize safety work. Organize more than 6 regular safety and civilized production inspections and all kinds of special safety inspections every month, find out the unsafe behaviors of employees and the unsafe state of equipment from the job site, educate employees on the spot, make timely rectification of hidden dangers, and nip all kinds of unsafe factors in the bud. In the first half of the year, * * * found more than 3 hidden dangers and problems, and all of them were rectified. Listen carefully and collect the reasonable safety suggestions and opinions of the team, and report to the superior leader.

according to the spirit of the company's notice, we conscientiously do a good job in the four precautions in summer, formulate and implement detailed emergency plans for flood control and fire fighting, and actively organize employees of West Factory to participate in the exercise, find out the shortcomings during the exercise, and ensure that the losses are minimized in the event of accidents.

conduct safety education for company employees. In particular, the safety education for new and foreign construction workers, through which they can get a preliminary understanding of the safety profile of the West Plant and the identification and prevention of dangerous sources in their work, establish a sense of safety self-protection in their future jobs and reduce the probability of production safety accidents.

Although I have played my role in the work of 2xx, I should also face up to the existing problems and deficiencies, and improve my work skills and strengthen my work discipline in the new year. Summary of work of safety personnel in non-high-risk industries 4

According to the deployment safety of occupational health, safety and environmental protection professional meeting in May, combined with the safety development situation in the second quarter, the area under the jurisdiction of the work area was closely monitored by making full use of favorable means to ensure the steady progress of safety production.

Our work area has many points, a wide area and complex distribution. There are 87 fans from 33 to 79, and the ventilation system of each plane is complicated. Every day, there are tunnels and patios running through, causing air leakage and air leakage, which makes the ventilation management more difficult, and the detection of carbon monoxide in large blasting breaks the standard. The work area is also responsible for the management of ore supply functions of 13 monitoring stations in the whole mine, and all 13 monitoring stations are important positions in the mine. The task of safety supervision is very heavy. In order to better complete the safety supervision task, our safety team closely cooperated with the leaders of the work area, combined with the actual situation of the ventilation work area, made a careful work plan through practical discussion and repeated research, and divided it into three groups from the original large group, which fully reflected the responsibility of everyone to implement the safety responsibility and everyone to manage the safety. Relevant work measures have been formulated, and good results have been achieved in safety work this month. Now I will summarize my work in May as follows.

Strengthen the key monitoring of three high-pressure fans in the east of 72, check and supervise the implementation of key areas and key posts, optimize the team, and handle problems in time when they are found, thus ensuring the timeliness and effectiveness of the whole region; On the unified arrangement of supervision, organize three shifts to inspect the site, eliminate the existing unsafe factors in time, inspect the inspection lines in each shift, observe the changes of the roof, and observe the integrity of the electrical circuits and equipment. Improve the management system, organize training for 4 days, so that the broad masses of workers understand the importance of safety, improve safety awareness, and formulate and implement corresponding job responsibilities. Grasp the basic management of safety technology, make use of the power of safety technology management, and put forward the existing shortcomings in time. Through six months' efforts, the regional safety infrastructure, system and staff quality in our work area are being improved one by one, and the on-site safety management has been fundamentally strengthened, so that the class follows the class and the on-site operation norms and standard behaviors are realized. Safety work has achieved advanced command and on-site problem solving, put an end to employees' behavior safety and ideological safety, and eliminated potential safety accidents in time. The main work in May is summarized as follows.

1. cooperate with the safety team leader to draw up the organizational measures for safety production and construction in June and the training plan for safety production education activities in June;

second, organized the security inspection of ventilation and dust prevention business in the whole mine in May, and issued a rectification notice for the hidden dangers found; Track and implement the ventilation hidden dangers issued; Organize and implement the work of fan installation and dismantling:

1. Dismantle the 3KW fan of 5 horizontal B34 line;

2. Dismantle the 55KW fan of the 5-level B62 line;

3. Dismantle the 3KW fan at the foot of the return air shaft of the 58 horizontal line B38;

4. A 55KW fan is installed at the foot of the return air shaft of line B38 at 58 level; Organized and completed the installation of 12 closed walls and 4 air doors from Medimo to 42 level; Organize and complete the smoke detection, data archiving, evaluation and reporting of 9 large-scale blasting in May; Combined with system ventilation, each shift shall check and implement long-distance single-head excavation and panel local ventilation, and earnestly do a good job in service, guidance and management of local ventilation; Organized 4 times to conduct comprehensive safety inspections on the working areas, operating points and 13 monitoring stations in the whole region, found 6 potential safety hazards, and handled 1% of the identified potential hazards to ensure the safety and health of operators.

third, combine the theme activities of the 11th Safety Month with "safe development and scientific development" as the core. Organize managers and workers in the whole region to study the national criminal law; Occupational disease prevention law and other laws and regulations, labor discipline; Employee's "three violations" behavior; "Six types" accident prediction and prevention knowledge and technical skills training. Enhance the safety production level and operation skill level of all employees in the work area, improve the safety awareness of employees, so that employees can truly digest and absorb the knowledge they have learned and apply it to the work of safety production, innovate the form of safety education for all employees, and change the employees' thinking, from asking me to be safe to a new concept of "I want to be safe, I manage safety, and everyone pays attention to safety", and completely improve the safety quality of each employee. Effectively combining with the actual situation of the production site, focusing on the implementation of safety precautions and standardized operating procedures for on-site operators, and conducting spot checks on the operating procedures and safety knowledge of the operators on a regular basis, in fact, the employees' ability to identify and deal with dangerous and harmful factors on site has been improved, and the accident rate has been controlled.