Contents of site management of safety production

Safety inspection is an important means and measure to eliminate hidden dangers, prevent accidents and ensure safe production. In order to continuously improve the production conditions and working environment, so that the working environment can reach the best state. In order to take effective measures to eliminate unsafe factors and ensure safe production, this safety inspection system is formulated as follows:

1. Safety inspection content: according to the grading standard of safety inspection on the construction site issued by the Ministry of Construction, compare the inspection implementation; Protection of the base groove edge; Construction electricity, safety facilities of construction machines and tools, operation behavior, correct use of labor protection articles, safety and fire prevention, etc.

2. Safety inspection methods: regular inspection, surprise inspection, professional inspection, seasonal inspection, inspection before and after holidays and regular inspection.

Second, the safety technical disclosure system:

Strict safety technical disclosure and serious implementation of safety technical measures are important guarantees for implementing the policy of safe production, reducing industrial accidents and realizing safe production.

1. Before the project starts, the construction director and technical director shall organize relevant personnel to formulate detailed safety technical measures according to the engineering characteristics, geographical environment and construction methods, and report them to the relevant technical safety departments at higher levels for approval. The approved safety technical measures have the function of technical regulations and must be carefully implemented.

2. When the project starts, the chief engineer and technical director shall make detailed safety technical disclosure to the project manager, builder, safety officer and team leader who organize the construction, so that the executors can know the truth and lay the foundation for the implementation of safety technical measures.

3. Before each single project starts, the on-site project manager shall organize the builder to explain the construction methods and safety technical measures to the actual operation team members in detail, and issue them to the team in writing.

4. The builder shall fill in the safety technical disclosure sheet according to the implementation of safety facilities, equipment and safety precautions of single project safety technical measures, and the person in charge shall implement the signature acceptance system for teams and individuals.

5. The production organizer of the construction site shall not change the safety technical measures without authorization. If reasonable suggestions are put forward, they shall be reported to the chief engineer in writing for approval. Before approval, it should still be carried out as planned.

6. The safety functional department shall regularly check the site implementation and supervise the implementation of various safety technical measures according to the construction safety technical measures and safety laws and regulations.

Iii. security team activity system:

1. Before each operation team enters the construction site, the project department must carry out "three-level safety education" for the team members and establish an education record card.

2. The project department must sign the responsibility book for production safety with each operation team leader and employee, and conduct targeted written safety technical disclosure. Both parties must perform the signing procedures.

3. Before going to work every day, each operation team leader must carry out comprehensive and targeted safety education activities for the employees of his team, mainly emphasizing the safety precautions of the operation that day, checking the wearing conditions of the employees' safety protection articles, and observing and understanding the employees' mood and psychological state that day.

4. Before putting into normal operation, the construction machinery and tools must be inspected twice: first, whether they are installed correctly and whether there are safety protection devices and safety protection measures; Second, check whether its performance is normal, and operate according to the operation procedure of maintenance before operation, especially the machinery prone to accidents, which must be overhauled before shift to check its safety status. If an accident is found, stop the machine immediately for maintenance, and then use it after debugging is normal.

5. All alcoholics are not allowed to enter the construction site before class; Anyone who doesn't have the qualification to work is not allowed to work.

6. The safety activities of the project department before shift must be recorded in writing, signed by the project safety officer, and supervised and inspected by the enterprise safety management section.

Four, construction electricity management responsibility system:

1. The team leader shall organize regular inspections of all electrical equipment, lines and protection systems on site, and arrange full-time electricians for maintenance in time when problems are found.

2. The deputy team leader shall conduct daily inspection, record hidden dangers of electricity consumption in time, and ask full-time electricians to make rectification within a time limit.

3. Team members and other management personnel should cooperate with the inspection work of the team leader and deputy team leader, conduct irregular inspections before and after holidays and after heavy rain and strong winds, report to the team leader and deputy team leader in time when problems are found, and nip all unsafe hidden dangers in the bud.

Five, construction electricity safety fire prevention system:

1. Non-professionals are forbidden to touch electrical equipment.

2. When using all kinds of electrical equipment, all operators must conscientiously implement safety operation procedures and obey the safety technical guidance of electricians.

3. No unit or individual may assign personnel without electrician operation certificate to install and maintain electrical equipment.

4. On-site management personnel should pay attention to the electrician's reasonable suggestions on safe electricity use, and shall not force the electrician to operate illegally for any reason.

5. Professional electricians must conscientiously implement relevant regulations and procedures, and consciously resist illegal operation instructions from any side.

6. Professional electricians have the right to stop all illegal electricity use and report to relevant departments when necessary.

7. Professional electricians should have a correct working attitude and actively cooperate with users to complete various production tasks.

Six, construction electricity inspection and maintenance system:

1. The electrical equipment on the construction site must be operated and installed by certified electricians, and it is forbidden for non-electricians to connect to the power supply.

2. Electrician operators must master the basic knowledge of safe electricity use and the performance of all equipment, and regularly check and maintain all power lines and equipment.

3. During inspection and maintenance, you must wear the corresponding labor protection articles according to regulations, turn off the switch and lock the switch box before operation.

4. The construction of electrical equipment, devices, regular protection, maintenance, extend the utilization rate, it is forbidden to equipment running in spite of illness.

5. During the inspection, the construction site must be inspected by a construction electricity safety team composed of the builder, safety officer and full-time electrician, and the inspection records shall be made.

Seven, construction machinery protection measures:

1. The protection objects of machinery on the construction site mainly include chainsaws, planers, mixers and grinders.

2. The chainsaw should be equipped with a wooden or iron belt guard, and the planer should be placed in a dry place in the wooden shed.

3. The protection of the planer is mainly to protect the belt with a wooden or iron shield, and the planer should be placed in a dry place in the wooden shed.

4. The protection of the mixer is mainly to build a protective shed to prevent rain and falling objects from hurting people. The protective shed is erected with steel pipes, and double protection is set on it.

5. The grinder shall provide airtight protection for the abrasive belt and place it on the dry ground in the steel shed.

Eight, construction machinery inspection and maintenance system:

1. All mechanical equipment on site shall be maintained and planned by the construction director and the mechanical monitor, and relevant personnel shall be arranged for maintenance and repair as planned. Full-time maintenance personnel should carry out routine maintenance and irregular inspection to ensure the normal use of machinery.

2. Mechanical maintenance workers must know fairly well about the quality of construction machinery, so as to find the reasons for maintenance in time and accurately. Be diligent in inspection, maintenance and maintenance.

3. For all kinds of problems in mechanical inspection, we must deal with them immediately, and we must never make do with them to prevent mechanical accidents, and make truthful records.

4. The project department shall organize relevant personnel to check the implementation of mechanical equipment maintenance once a month, and give economic punishment to those who neglect their duties and fail to carry out regular maintenance as required, resulting in the loss of mechanical operation in spite of illness.

Extended data:

Safety production management is a very important part for any industry, and safety management is also the top priority of all managers. Many industries have the whole production line that implements the policy of "safety first, environmental protection first and comprehensive management". Safety issues are closely related to the safety of workers and the interests of enterprises.

For high-risk industries, such as construction, mining, energy, chemical industry and so on. Safety must be the first priority. Assuming that there are security loopholes, there are many security risks in construction projects, which will lead to accidents, which will hurt people and endanger life, thus affecting social stability.

Safety in production is also beneficial to the benefit of enterprises. Safety first and quality first are the slogans on the construction site, and there are few slogans related to profit, but in fact, enterprises also need efficiency. Safety and efficiency complement each other.

As long as the safety work is done well, there will be no accidents and a lot of costs will be saved. Under the premise of no accident, it is the best enterprise benefit that the enterprise can successfully complete the construction on time according to the quality standard.

Baidu Encyclopedia-Safety Management of Construction Sites