What happened to the horn ringing when Emgrand gs locked the door?

The reason why the horn of Emgrand gs of Pacific Auto Network locks the door is that the electronic anti-theft system of the vehicle has failed, so it is necessary to initialize and reset the electronic anti-theft system of the vehicle to eliminate this problem.

The main reasons for the abnormal sound of the front door are:

1, when the vehicle is running, the passenger seat belt collides with the door, so there is obvious abnormal noise at the door;

2. The buckle on the sun visor of the passenger cab was screwed too tightly, and no lubricating oil was added to the buckle for a long time, which caused the vehicle to hiss when shaking.

If you want to solve the problem of abnormal noise, the owner can go to the dealer who specializes in selling vehicle supplies and buy two sets of seat belt buckles and a bottle of rust lubricant, and be sure to buy soft seat belt buckles; Then the purchased buckle is sleeved on the safety belt of the vehicle, which can solve the abnormal sound at the safety belt; Secondly, spray rust lubricant evenly on the buckle of the co-pilot sun visor. After painting, you can drive the vehicle on a bumpy road to see if there is any abnormal noise. 2 What is the function of Emgrand gs remote control key? It refers to the key that can remotely open and lock the door by using the wireless remote control function of the central lock without inserting the key into the lock hole, which is more common when opening the smart door lock. Its biggest advantage is that it can be unlocked (opened) and locked (locked) remotely and conveniently, and there is no need to find the keyhole no matter day or night.

The basic principle of remote control is that the car owner sends out a weak radio wave, the car antenna receives the radio wave signal, the electronic controller ECU recognizes the signal number, and then the actuator (motor or electromagnetic manager ring) of the system performs the on/off action.

The system is mainly composed of transmitter and receiver. When the modem lock receives the correct coded signal, the control wave receiving circuit is triggered to the receiving time plus 0.5s, and then returns to the standby state. If the input code signals do not match, the receiving circuit will not be triggered. If there are more than 10 mismatched code signals within 10 minutes, the lock will think that someone is trying to steal the car, so it will stop receiving any signals.

Includes receiving the correct password signal, in which case the owner must mechanically insert the key into the door lock hole to open the door. Signal reception can be resumed by turning on the key ignition switch, turning it off, and then turning on the main switch of the remote door lock system. If it is unlocked by remote control mechanism within 30 seconds, the door will automatically lock.

(Photo/Text/Photo: Pacific Auto Network Q&A called Beast)