Corolla Instrument Panel Indicator Solution

Corolla dashboard indicators are as follows:

1. Seat belt indicator: used to show whether the seat belt is locked. When this indicator light is on, it means that the seat belt is not fastened in time. Some models will have corresponding tips. When the seat belt is fastened in time, the indicator light will go out automatically.

2. Door indicator light: used to display the status of each door of the vehicle. If any door is not closed or not closed correctly, the indicator light will illuminate the corresponding door indicator light to remind the owner that the door is not closed correctly. When the door is closed or closed correctly, the corresponding door indicator light will go out.

3. Oil indicator: used to display the oil pressure in the engine. Open the key door. When the vehicle starts self-inspection, the indicator lights up and goes out after starting. The indicator light is always on, indicating that the oil pressure of the car is lower than the specified standard and needs maintenance.

4. Fuel quantity indicator: used to display the fuel quantity stored in the vehicle. When the key door is opened and the vehicle performs a self-test, the fuel quantity indicator will light up briefly and then go out. If the indicator lights up after starting, it means that the fuel in the car is insufficient.

5.ABS indicator light: used to display the working state of ABS. When the key door is opened and the vehicle is self-tested, the ABS light will light up for a few seconds and then go out. If it doesn't flash or go out after starting, it indicates that ABS is faulty.

6. Handbrake indicator light: used to display the state of the vehicle handbrake, which is usually closed. When the hand brake is pulled, the indicator light will light up automatically. When you put down the handbrake, the indicator light goes out automatically. If the handbrake is not put down during driving, some models will be accompanied by a warning sound.

7. Water temperature indicator: used to display the temperature of engine coolant. When the key door is opened, it will light up for a few seconds and then go out. The water temperature indicator is always on, indicating that the coolant temperature exceeds the specified value and it is necessary to stop driving immediately. Extinguish when the water temperature is normal.

8. Brake disc indicator lamp: used to display the wear of vehicle brake disc. Usually, the indicator light is off. When the brake disc is faulty or excessively worn, the indicator light will light up and go out after repair.

9. Airbag indicator light: used to display the working state of the airbag. When the key door is opened and the vehicle starts self-inspection, the indicator light will automatically light up for a few seconds and then go out. If it is kept open, the airbag will fail.

10, battery indicator: used to display the battery usage status. When the key door is opened, the indicator light will light up when the vehicle starts self-inspection. Automatically goes out after starting. If the battery indicator light is always on after starting, it means that there is something wrong with the battery and it needs to be replaced.

Extended data:

Generally speaking, when the vehicle fault light is on, it is mostly caused by the fuel emission system. Start and stop the vehicle when the fault light is on. After starting the vehicle three times, observe whether the fault light is still on. If it is still on, you need to go to the store to check the fault code in time to see if it is an engine fault or a sensor fault. Otherwise, it may be an accidental failure, and it is not necessary to go to the store for inspection in time.