Enterprise Security Commitment Letter

In an ever-progressing society, our use of letters of commitment is increasing day by day. In terms of writing, letters of commitment have certain writing standards. So how is a general commitment letter written? Below are 10 corporate safety commitment letters that I have compiled for you. Welcome to read and collect them. Enterprise Safety Commitment Part 1

Project Department Leader:

After review and approval by Beichen Zhengfang Construction Group Changsha Branch, safety education and safety education and training organized by the D1 District Project Manager Department and Safety Department If you pass the training and assessment, you will take on the job of security guard from now on

I promise the following:

You must wear a safety helmet when entering the construction site. It is strictly prohibited to work barefoot, bare-chested and wearing slippers. Smoking is prohibited in flammable and explosive areas. Children and idlers are strictly prohibited from staying on the construction site. Drinking and fighting at the construction site are prohibited. If found, a fine of 500 yuan will be imposed. In serious cases, they should be sent to the public security organs for handling.

Observe the rules and regulations on the construction site and work and rest time, conduct civilized construction, standardize operations, obey the management of the squad leader, obey the work assignments, have a strong sense of responsibility, be serious, responsible and careful about the work, stick to the job, and do not encounter unexpected situations when leaving get off work. Be on call for tasks, be proactive in your work, be active in your eyes, perform your duties conscientiously, and do all the tasks assigned by the squad leader and section leader in a timely manner.

You are not allowed to pick up scraps, cartons, (steel) wire ends, and mineral water bottles without permission at work. You are not allowed to damage finished or semi-finished materials on the construction site at will. If you accidentally damage them, you will be responsible for the personal compensation. Materials, equipment, machinery, tools, etc. must be cared for and protected by everyone and must not be damaged or lost.

Pay attention to safety when using electricity on the construction site. All power lines, electrical connections, and lighting electricity should be wired by dedicated electricians on the construction site. No unauthorized connections are allowed, and no barbaric construction operations are allowed. There are safety risks at work. Hidden areas must be reported to the squad leader and project department managers in a timely manner, and construction can only proceed after ensuring that it is safe.

I have a warm attitude toward Mengba, and I respond kindly to brothers in subcontracting units. At work, I am not allowed to ask for any property from others, and there are no conflicts or disputes between colleagues.

Personnel on duty wear armbands and walkie-talkies. If supervisors find that they are not wearing them, their wages for the day will be deducted. They must take their duties seriously, stick to their posts, do not drink or sleep during work, and keep records of shift handovers.

Pay attention to maintaining the company's image and personal image on the construction site, and do not say or do things that are detrimental to the company's image and interests.

Commitment person: Security squad leader:

Security team leader: Project leader:

Enterprise safety commitment letter 2 on July 6, 20xx

Safety is the life of an enterprise, the happiness of the family, the joy of work, and the efficiency of the unit; it is peace, a kind of happiness, and an attitude towards life that cherishes life. Doing a good job in safe production is a basic requirement for the survival and development of an enterprise. It is a major matter related to the safety of the lives and property of employees and the stability of the development of the enterprise. As a member of the power station, I know that there are many electrical equipments in power production, and switching operations are difficult. There are many flammable and explosive items frequently, and there are many potential dangerous factors in production. If you are slightly negligent at work, personal casualties and equipment damage accidents will occur.

Therefore, I solemnly promise to do the following in my future work:

1. Seriously fulfill job safety responsibilities, educate and supervise members of this team to learn and perform relevant safety operations, and produce Responsible for the safety of team members and their own safety in accordance with the various rules and regulations in operation.

2. Comply with the company’s various safety management rules and regulations, obey management, use safety protective equipment and labor protection equipment correctly, and resolutely resist unsafe behaviors that are “violating, careless, and irresponsible” Fight and strive not to hurt yourself, not to hurt others, and not to be hurt by others.

3. Carefully organize pre-shift and after-shift meetings, combine on-duty tasks, anticipate accidents, arrange safety measures, correct violations in a timely manner, and strictly prevent accidents.

4. Carefully organize the weekly "Safety Day" activities of this team, learn procedures, accident notifications, and anti-accident measures, learn lessons based on actual conditions, improve work, and work hard on prevention.

5. Ensure the healthy and continuous operation of equipment within the jurisdiction of the team, complete protective facilities, complete fire protection systems and fire equipment, and actively learn relevant knowledge about fire extinguishing and fire escape, and be familiar with the use of various fire extinguishing equipment in the power station Method and configuration location.

6. In daily work, do not give orders in violation of rules, do not work in violation of rules, do not violate labor discipline, and do not work blindly.

7. Support the work of the company’s safety supervision department, actively accept criticisms and suggestions from safety managers and other personnel on their own unsafe behaviors, and make timely corrections.

8. Actively participate in various trainings and safety learning activities organized by the company, continuously improve safety production skills, and enhance accident prevention and emergency response capabilities.

9. Actively participate in the company's safety culture construction, strive to create a harmonious safety production atmosphere, and cultivate good working habits and safety values.

I have received safety education for this position and am familiar with the contents of the safety commitment letter and the responsibilities of this position. I am willing to perform it conscientiously and accept the supervision of leaders and employees at all levels. Corporate Safety Commitment Book 3

Integrate the safety vision, values, mission, and goals into Jinyuan’s safety work and employee safety behaviors, and become a new mental model and behavioral guide for all employees, leading the safety humanistic refinement To manage and create an intrinsically safe enterprise, we have established safety commitments including safety vision, safety values, safety mission, safety goals, etc., and carried out extensive and in-depth promotion and penetration activities of safety vision, goals, and values ??in the company.

1. Safety Vision: Safe Jinyuan, Happy Home

2. Safety Values: Safety is Benefit Safety is Happiness

3. Safety Mission: Life First Safety is paramount

4. Safety goal: build an intrinsically safe enterprise and ensure the safety and health of employees

5. Safety concept: safe production and happy life

Safety Vision and goals are inspiring goals and good wishes. They are the banner and beacon of the company's safety work and the spiritual motivation that unites all employees to strive for it. Jinyuan's safety concept is based on Jinyuan's actual situation and sums up the company's safety work. It is formed through careful summary and refinement based on many years of practical experience and lessons in production safety. Jinyuan's safety concept is the ideological soul and behavioral guide of Jinyuan's safety work, and is Jinyuan's safety values.

1. Safety Vision: Safe Jinyuan, Happy Home

“Safe Jinyuan, Happy Home”, as the common safety vision of Jinyuan people, fully reflects the Source people’s needs for peace and happiness. Peace lays the foundation for a beautiful Jinyuan future, sets sail for the harmonious Jinyuan ship, adds color to the green Jinyuan's grand plan, and adds glory to the long-lasting Jinyuan's great cause. Happiness is based on peace as a premise and guarantee. Only with peace can happiness accompany us every day.

The peace and happiness pursued by Jinyuan people are lasting peace and eternal happiness. Jinyuan people have perseverance, perseverance and ability to support the sky of peace and pave the way to happiness, making Jinyuan a An oasis of life and health, a safe and happy home.

2. Safety values: Safety is benefit, safety is happiness

Safety values ??refer to a person’s awareness of his or her own safety. In other words, safety values ??are a comprehensive response to each person's own safety awareness, safety concepts, environment, safety skills and other personal safety issues. Therefore, in order to avoid and reduce accident injuries and ensure your own safety, you must establish correct safety values.

For enterprises, the value brought by safety is a prerequisite for achieving benefits. Without safe production, there will be no benefits; for individual families, safety is a necessary condition for happiness.

3. Safety goal: build an intrinsically safe enterprise and ensure the safety and health of employees

The core of Jinyuan’s safety goal is to build an intrinsically safe enterprise. The starting point and goal is to protect employees. Safety and health. Human life is only once, and life and health are of supreme value. Building an intrinsically safe enterprise is the fundamental guarantee for employee safety and health. "Intrinsic safety" means establishing a long-term safety mechanism that focuses on prevention and sustainable development through modernization of technical equipment, institutionalization of personnel training, and refinement of basic management to achieve the safety of people, machines, materials, laws, environment, and management. A high degree of harmony and unity, long-term safety and stability, and comprehensive improvement of safety production capabilities and employee health levels. Enterprise Safety Commitment Part 4

Commitment content:

1. Conscientiously implement the national and superior safety production and labor protection guidelines, policies, decrees, rules and regulations and safety procedures, and have the first leadership responsibility for the unit's safety and environmental protection work.

2． Conscientiously implement the safety policy of "safety first, prevention first, safety mobilization, comprehensive management" and conscientiously implement the relevant provisions of the "Safety Production Law".

3． Strengthen organizational leadership, establish and improve the safety network of the unit, organize and hold regular meetings of the production safety leadership group, promptly identify and solve major sources of danger in production safety, and prepare for all problems in advance.

4． Strengthen the unit's investment in safety production to ensure the normal progress of safety production learning activities.

5． Support the work of the unit's safety supervisors, actively carry out various safety activities, strive to create a healthy and safe cultural atmosphere, provide a good workplace for employees, and provide a safe space for the surrounding society.

6. Achieve no accidents, no pollution, no personal injuries in production within the year, establish a work spirit of understanding that accidents are more dangerous than tigers, responsibility is heavier than mountains, and the determination of people to put safety first, striving to become a first-class enterprise in safety management.

I promise to perform my duties in accordance with the above content

Promisor:

Commitment date: Year, month, day Enterprise Safety Commitment Book 5

In order to ensure the safe, reliable and stable operation of the unit's information network, important information systems and websites, as the main person in charge of the unit's network and information security work, I have overall responsibility for the unit's network and information security work and make the following commitments:

1. Strengthen the organizational leadership of the unit’s network and information security work, establish and improve network and information security working institutions and working mechanisms, and ensure the smooth flow of network and information security work channels.

2. Clarify the responsibilities of the unit's information security work, and implement security responsibilities to specific departments, specific positions and specific personnel in accordance with the principle of "whoever is in charge is responsible; whoever operates is responsible".

3. Strengthen the security level protection management of the unit’s information system. Under the supervision, inspection and guidance of the public security organs, consciously and proactively complete the information system grading and filing in accordance with the requirements of the level protection management specifications, and Construction and rectification will be carried out to existing safety hazards or aspects that fail to meet relevant technical standards, and the security protection level will be dynamically adjusted according to the actual construction and application of the information system.

4. Strengthen information security emergency response work at each node of the unit. Formulate information security plans, strengthen emergency team building and personnel training, and organize security inspections, security tests, and emergency drills. During major festivals and sensitive nodes, we will strengthen security monitoring of important information systems, strengthen duty, strictly prevent and respond to various emergencies at any time.

5. In accordance with the "Information Security Level Protection Management Measures", "Internet Information Management Service Measures" and other regulations, further strengthen the supervision and management of network and information security, and strictly implement the "zero daily reporting of information security emergencies" "Reporting System", if an information security incident occurs in the unit and fails to be reported, lies or delays in reporting, the responsible person must be given administrative treatment in accordance with relevant regulations; if a major information security incident occurs, causing significant losses and impact, the relevant unit must be held accountable in accordance with the law. and personnel responsibilities.

6. As the person responsible for the network and information security work of the unit, if a major information security incident occurs that affects national security, social order, public interests, citizen legal persons and other organizations, I assume primary leadership responsibilities.

Violation of the above commitments will voluntarily bear the corresponding subject responsibilities and legal consequences.

Responsible unit (seal), main person in charge (signature):

Year, month, day, enterprise safety commitment letter 6

Project department leader:

p>

After being reviewed and approved by the Changsha Branch of Beichen Zhengfang Construction Group, and passing the safety education and training assessment organized by the D1 District Project Manager Department and the Security Department, I will assume the work of a security guard from now on. I promise the following:

1. You must wear a safety helmet when entering the construction site. It is strictly prohibited to work barefoot, shirtless or wearing slippers. Smoking is prohibited in flammable and explosive areas. It is strictly prohibited to bring children and other people to stay on the construction site. No people are allowed to stay on the construction site. If drunkenness and fighting are found at the construction site, a fine of 500 yuan will be imposed. If the circumstances are serious, they should be sent to the public security organs for handling.

2. Observe the rules and regulations on the construction site and work and rest times, conduct civilized construction, standardize operations, obey the management of the squad leader, obey work assignments, have a strong sense of responsibility, be serious, responsible and careful about work, stick to the job, and work hard when leaving work. Be on call when encountering temporary tasks, work proactively, have a lively eye, perform your duties conscientiously, and do all the tasks assigned by the squad leader and section leader in a timely manner.

3. You are not allowed to pick up waste products, cartons, (steel) wire ends, and mineral water bottles privately during work. You are not allowed to damage finished or semi-finished materials on the construction site at will. If you accidentally damage them, you will be responsible for the personal compensation. Everyone must care for and protect materials, equipment, machinery, tools, etc. on the construction site, and they must not be damaged or lost.

4. Pay attention to safety when using electricity on the construction site. All power lines, electrical connections, and lighting electricity should be wired by dedicated electricians on the construction site. No unauthorized connections are allowed, and no barbaric construction operations are allowed. During work, Areas with potential safety hazards must be reported to the squad leader and project department managers in a timely manner, and construction can only proceed after ensuring safety.

5. Be enthusiastic towards Mengba, and give kind answers to brothers in subcontracting units. At work, you are not allowed to ask for any property from others, and there are no conflicts or disputes between colleagues.

6. Personnel on duty should wear armbands and walkie-talkies. If supervisors find that they are not wearing them, their wages for the day will be deducted. They should take their duties seriously, stick to their posts, do not drink or sleep during work, and keep records of shift handovers.

7. Pay attention to maintaining the company's image and personal image on the construction site, and do not say or do things that are detrimental to the company's image and interests.

Commitment person:

Security squad leader

Security team leader:

Project leader:

July 20xx Chapter 7 of the Enterprise Safety Commitment on September 6th

According to the relevant regulations of the xx Municipal Government Safety Production Committee and the xx Municipal Construction Committee Safety and Civilization Office, construction companies must achieve safe and civilized on-site construction. The company has specially formulated the "Civilized Construction Site Assessment Standards". According to this provision, the following points must be achieved:

1. Construction site safety and environmental sanitation management

1. There are fences at the construction site To ensure that the fence materials are strong, stable, clean and beautiful.

2. Construction site:

The site should be hardened, the roads should be smooth, there should be drainage facilities and the drainage should be smooth, there should be no accumulation of water on the construction site, and a special smoking area should be set up. Safety helmets must be worn during working hours. ,seat belt. For high-altitude construction near the edge, safety nets and flat nets must be set up according to regulations, and protective railings must be set up at the "fourth entrance" according to regulations.

3. Safety production:

Construction units must have full-time safety officers, carefully carry out safety education and training for workers, establish and implement a safety production responsibility system, and strictly prevent landslides and falls from high altitudes. Personal accidents such as falls and smashing injuries.

The general contractor of the construction unit must bring the safety work of its own subcontracting team and the construction party's subcontracting team personnel into the general contractor's management, strictly implement safety operating procedures, strengthen inspections and regular inspections, and must not use the subcontractor to manage .

4. Stacking of materials:

Materials, objects, and supplies must be arranged according to the installation plan, stacked neatly, and classified. Construction waste is managed in a closed manner and does not pollute the environment. Flammable and explosive materials should be stored in categories.

5. Closed management:

There are gates at the entrance and exit of the construction site, and there are gatekeepers and guard systems. You must wear a badge when entering the construction site, and there is a corporate logo on the door.

6. On-site dormitory:

The dormitory has fire prevention measures, the beds are neatly placed and set up according to the "SARS prevention" requirements, and the environment is hygienic, clean and safe. There are anti-gas measures in winter.

7. Comprehensive public security:

Establish a public security system, assign responsibilities to individuals, and take effective public security precautions.

8. Construction site signs:

Construction site safety signs must be standardized and neat, with publicity boards, newspaper reading boards and other facilities.

9. Living facilities:

The toilets are clean and hygienic. The canteen meets the requirements of the local health and quarantine department, and the cooks have health certificates and wear white overalls. A sanitation responsibility system is put on the wall, domestic garbage is cleaned up in a timely manner, and drinking water is ensured to meet sanitation standards.

10. Surrounding environment:

There are measures to reduce dust, no toxic or harmful substances will be burned on site, and construction measures will be established not to disturb residents.

11. Safe use of electricity:

Five-core cables must be used at the construction site and living areas to achieve one machine, one gate and one protection to ensure safe use of electricity.

2. Fire safety management

1. Implement the "Fire Protection Law of the People's Republic of China" and various fire prevention technical specifications.

2. Adhere to the policy of “prevention first, combined with fire protection” to nip problems in the bud.

3. The construction unit must establish a voluntary fire brigade and formulate various fire prevention management systems and plans.

4. The construction unit must formulate a one-day fire prevention inspection system, repair, inspect and maintain the fire protection system equipment from time to time, formulate fire extinguishing plans for key fire prevention parts, and conduct regular drills, key inspections and prevention.

5. The construction unit shall store and keep construction materials in accordance with the warehouse fire safety management regulations.

6. Inflammable and explosive chemical dangerous goods and compressed combustible materials are not allowed to be stored in the project. For flammable and explosive chemical dangerous goods and compressed combustible gas containers, special warehouses should be set up for classified storage according to their properties. When using flammable and explosive chemical dangerous goods during construction, fire safety measures should be formulated. Packing and seasoning are not allowed in the workplace. The use of liquefied petroleum gas is prohibited in the construction site.

7. The construction unit must establish and improve a fire management system. When using fire in construction operations, it must be reviewed and approved by the person in charge of fire prevention at the construction site, and only after obtaining a fire certificate can the work be carried out at the designated location and time. Smoking is prohibited at the construction site.

8. The construction unit must establish and improve the electricity management system and take fire prevention measures. The installation of electrical equipment and special types of welding operations must be performed by trained and qualified technicians with certificates.

9. The construction unit is not allowed to set up dormitories within the construction project, and it is prohibited to use combustible materials as partitions and electric heating appliances in the living area. The emergency lighting and evacuation signs set up should meet the requirements.

10. Set up temporary fire lanes at the construction site and ensure the smooth flow of the fire lanes. The construction site and living area must also be equipped with corresponding fire-fighting equipment and a temporary fire-fighting water supply system. Construction projects with a building height exceeding 24 meters should install temporary fire standpipes. Temporary fire standpipes must not be removed or decommissioned before the formal fire water supply system is put into use.

11. The safety nets, fences and insulation materials used at the construction site should comply with fire safety regulations, and flammable, explosive or combustible materials must not be used.

12. Those who use coal fires for heating must carry out regular safety inspections. It is prohibited to use simple stoves made of thin iron sheets. Those without chimneys, wind ducts and poor ventilation conditions that are fire hazards must be rectified immediately. , to prevent gas poisoning and fire.

3. Food Hygiene and Safety, Prevention of Infectious Diseases

1. The construction unit must strictly implement the "Food Hygiene Law", the canteen must obtain a health license before use, and food workers must A physical examination is required, and a health certificate is required for employment. Anyone with infectious diseases will be dismissed resolutely.

2. When the canteen purchases fresh food and vegetables during the procurement process, pesticide residues in vegetables and fruits must be washed away during processing to avoid pesticide poisoning. Canteens must eat less foods that can easily cause food poisoning. It is best not to eat lentils, for example.

3. Strengthen education, supervision and inspection of food workers. Prevent food poisoning and disease transmission.

The project manager of the construction unit is responsible for the production safety, fire prevention safety, gas poisoning prevention and food hygiene and safety work at the construction site, living area and company offices of the unit, and is the first person in charge, above All regulations require responsible persons to resolutely implement them and implement them strictly. For safety accidents that occur within the scope of the responsible person's management during the period of his management, the responsible person shall be responsible for solving them himself. Those who violate the law shall bear criminal responsibility.

This letter of responsibility is made in triplicate, with two copies kept by the construction unit and one copy kept by the construction unit.

Construction unit: Construction unit (responsible party):

Person in charge (signature and seal): Project manager (signature and seal):

Year, month and day Enterprise Safety Commitment Chapter 8

For personal safety and health, for family happiness, and for the stable development of the enterprise, I must conscientiously abide by laws and regulations and standardize operations at work. Safety production starts with me. , and solemnly promise:

1. Before taking up the job, I have accepted the unit's: three-level safety education for new workers, safety production discipline education, project management system education, and the "safety production operating procedures for this type of work" ”, and education on various safety and public security management regulations and rules and regulations.

2. Keep in mind the safety production policy of "safety first, prevention first", consciously perform the safety responsibilities of this position, adhere to safety first when there is a conflict between production and safety, and achieve: people-oriented, safety-oriented God, we must resolutely avoid production if it is unsafe.

3. Without violating the basic rights of citizens stipulated in relevant national laws and regulations, I voluntarily accept the safety inspection and supervision of superior leaders and safety personnel, and consciously accept the daily management of the project department.

4. During work, consciously abide by national and local laws and regulations, and consciously abide by the relevant safety production management systems and regulations of the project department. Do not violate safe operating procedures and use personal labor protection supplies and safety protection equipment correctly.

5. Enhance the awareness of self-protection: "I will not hurt others, I will not be hurt by others, and I will not hurt myself" at work, and do not engage in non-work-related activities during working hours.

6. Consciously abide by various laws, regulations, systems and regulations on fire management, actively learn the knowledge of fire extinguishing and fire escape, be familiar with the use of various fire extinguishing equipment and escape routes, and be proficient in the emergency response of various accidents in this position. Measures should be taken to deal with abnormal situations in a timely manner without delaying the opportunity.

7. In daily work, do not give orders, do not work in violation of rules, do not violate labor disciplines, and do not work blindly; in order to achieve the goal of corporate safety, ensure zero errors in operation, zero errors in work, and zero accidents in safety around you. There are no "three violations".

8. Take the initiative to stop unsafe behaviors of colleagues, and immediately report to the on-site safety production management personnel or the person in charge of the work area if any accident hazards or other unsafe factors are discovered. Those who receive the report should deal with it in a timely manner.

9. Actively participate in various safety trainings, safety learning, safety activities and accident emergency drills in the project department and affiliated work areas, master the safety production knowledge required for operations, and enhance accident prevention and emergency response capabilities.

For the above commitments, I consciously abide by them. If there is any violation, I am willing to take responsibility.

This letter of commitment shall take effect from the date of signature.

Commitment person (signature): Year, month, day

Project manager (signature): Year, month, day Enterprise safety commitment letter 9

For the xx Provincial Traffic Police Corps On September 30, 20xx, we issued relevant notifications on the vehicle violations of several transportation companies. In order to further strengthen safety management and conscientiously implement the main responsibility of corporate safety production, we have made a public commitment to the society:

1. Strengthen the leadership of safety production organizations, ensure the implementation of national safety production laws and regulations, and ensure legal transportation.

2. Improve the safety management organization to ensure that the organization is sound and personnel are in place.

3. Strictly implement the safety production management system, ensure the implementation of the system, and ensure that management is in place.

4. Allocate safety production management funds in strict accordance with regulations to ensure that safety is put into use.

5. Strengthen employee management and safety education, conscientiously implement the employee safety education and training system, and ensure that the education and training rate reaches 100.

6. Strictly investigate potential safety hazards, eliminate illegal activities, and prevent vehicles and personnel that do not meet regulations from engaging in road transportation of dangerous goods.

7. Carefully formulate emergency rescue plans, improve emergency response capabilities, and ensure that rescue operations are in place.

8. Strictly investigate accident liability, do not tolerate any accommodation, and hold those responsible for violations of the law accountable in accordance with regulations and laws.

Commitment units: XX City Yutong Logistics Co., Ltd. XX City Yutong Qinbei Logistics Co., Ltd. XX City Taihang Transportation Co., Ltd. Corporate Safety Commitment Book 10

In order to further strengthen the motor vehicle Maintain safe production, prevent accidents in maintenance and business activities, and implement the "National Security Law of the People's Republic of China", "Motor Vehicle Maintenance Management Regulations", "Road Transport Regulations of the People's Republic of China", "Shanxi In accordance with the Provincial Road Transport Regulations and other laws and regulations, the company promises to do the following safety work:

1. The legal representative (principal person in charge) of the company is the first person responsible for the company’s safe production and is responsible for the company’s safety Fully responsible for production.

2. Establish and improve the production safety management system that is compatible with the content of maintenance operations, establish a production safety organization, decompose safety responsibilities layer by layer, implement a production safety responsibility system, implement safety responsibilities to people, and The place of business is clearly stated.

3. Provide regular or irregular production safety education and training to all employees, and keep good ledger records. For new employees, we provide training and education first and then take up their posts. Ensure that employees have production safety knowledge, are familiar with relevant safety production rules and regulations and safe operating procedures, and master the safe operation skills for their positions.

4. Equipped with safety protection measures suitable for the maintenance work content. Safety protection facilities, fire-fighting facilities, etc. all comply with relevant regulations. Dedicated personnel are responsible for the storage, use and maintenance of toxic, flammable, explosive items, corrosives, pressure vessels and other hazardous items.

5. Establish and improve safe operating procedures for various types of work and various types of electromechanical equipment. The safe operating procedures are clearly displayed near the corresponding work stations or equipment. Regularly inspect, repair and maintain lifting equipment, calibration equipment, paint rooms and other facilities and equipment that are prone to production accidents, as well as electrical circuits, and keep maintenance records.

6. Implement dedicated personnel to strengthen safety management and supervision and inspection at the production site, conduct regular safety inspections and self-examination and self-correction of hidden dangers, and have the main person in charge visit the work site for inspection at least once a month.

7. The production plant and parking lot have met various requirements such as safety, environmental protection and fire protection, and have obtained corresponding certificates of conformity.

8. Establish and improve the automobile maintenance quality management system, and conscientiously implement the quality inspection regulations before, during and after maintenance. When performing secondary maintenance, assembly repair or complete vehicle repair on a vehicle, the "Three Single Certificate System" shall be strictly implemented. After passing the inspection, the maintenance quality inspection personnel shall issue a motor vehicle maintenance certificate.

9. Repair motor vehicles according to the permitted projects issued by the license, and do not operate outside the scope. We will not repair scrapped motor vehicles, nor modify motor vehicles without authorization. A warehousing inspection system is implemented for repair parts. It does not apply to repairs of fake and shoddy motor vehicles. All repairs involving automobile safety parts will be subject to enhanced inspection or testing.

10. Once a safety incident occurs, report it immediately to the industry authorities and safety department.

Commitment unit: (seal)

Legal representative: (signature)

Date: