Joke Collection Website - News headlines - A complete set of information is needed on the wall of the fire control room.

A complete set of information is needed on the wall of the fire control room.

There are too many things. I'll send these to you first. I hope I can help you!

(A) fire safety education and training system

1. Every year, the fire safety awareness of all employees is improved by setting up a fire knowledge bulletin board and holding a knowledge contest.

2. Organize employees to learn fire laws and regulations on a regular basis, so as to achieve fire control according to law.

3. Each department should conduct fire safety education and training according to the post characteristics.

4. Conduct on-site demonstration and training for the maintenance and use personnel of fire control facilities.

5. Conduct pre-job fire protection training for new employees, and take up their posts only after passing the examination.

6. Employees must be re-educated and trained before changing jobs due to work needs.

7, fire center and other special positions to carry out professional training, after passing the examination, show certificates.

(2) Fire inspection and patrol system

1, implement step-by-step fire safety responsibility system and post fire safety responsibility system, and implement inspection system.

2. The centralized management functional department of fire control shall conduct daily fire control inspection for the company. Conduct a fire inspection on the unit once a month, and review and track the improvement.

3. If a fire hazard is found in the inspection, the inspector shall fill in the fire inspection record and require the relevant personnel to sign the record in accordance with the regulations.

4. The inspection department shall timely notify the inspected department of the inspection, and the person in charge of each department shall notify the daily fire safety inspection. If there is a fire hazard in this unit, it shall be rectified in time.

5. If the fire hazards found in the inspection are not rectified in time according to the specified time, they will be punished according to the reward and punishment system.

(3) Safety evacuation facilities management system

1, the unit shall keep the evacuation passage and exit unblocked, and it is forbidden to occupy the evacuation passage, and it is forbidden to set fences and other obstacles that affect evacuation at the exit or entrance.

2. Fire safety evacuation signs and emergency lighting facilities that meet the requirements of the state shall be set according to the specifications.

3 fire doors, fire safety evacuation signs, emergency lighting, mechanical smoke exhaust and air supply, fire accident broadcasting and other facilities should be kept in normal condition, and regular inspection, testing, maintenance and maintenance should be organized.

4. It is forbidden to lock the safety exit during business or work.

5. It is strictly prohibited to close, block or cover the safety evacuation sign during business or work.

(4) Fire Control Center Management System

1, be familiar with and master the performance of all kinds of fire fighting facilities, and ensure the orderly, accurate and fast operation in the fire fighting process.

2, completes the fire duty records and hand-over records, handling fire calls.

3, succession on time, completes the duty record, equipment handover procedures, accident treatment, and so on and so forth. Without handover procedures, the personnel on duty shall not leave their posts without authorization.

4, found that the equipment failure, should report in time, and notify the relevant departments to repair in time.

5, non-work needs, shall not use the fire control center internal telephone, non-fire control center personnel on duty are prohibited from entering the duty room.

6. Smoking, sleeping, reading, reading newspapers, etc. You are not allowed to enter the fire center during working hours, and you should go through the handover procedures when you leave your post.

7. When a fire is found, it should be handled according to the fire-fighting plan, and call the public security fire department 1 19 to report to the department head.

(5) Maintenance and management system of fire control facilities and equipment

1. The full-time administrator is responsible for the daily use and management of fire-fighting facilities, and the full-time administrator checks the use of fire-fighting facilities every day to keep the facilities clean, hygienic and in good condition.

2. The centralized management department of fire control work is responsible for the maintenance and regular technical inspection of the technical performance of fire control facilities and fire control equipment, and has a full-time administrator to check the operation of fire control equipment on time every day. Check the operation records, listen to the opinions of the personnel on duty, arrange maintenance in time if any abnormality is found, and keep the equipment in good technical condition.

3, fire control facilities and fire equipment regular inspection:

(1) The centralized fire management department is responsible for organizing the implementation of the smoke temperature alarm system, with the participation of the security department. Each smoke and temperature sensor is tested in turn at least once a year.

(2) The fire pump, spray pump and water curtain pump shall be debugged once a month to check whether they are complete and easy to use.

(3) Positive pressure air supply and smoke control system shall be tested once every six months.

(4) Indoor fire hydrant and spray water flow test shall be conducted once every quarter.

(5) The test time of other fire-fighting equipment shall be determined according to different situations.

4, fire equipment management:

(1) During the winter defense and summer defense, the fire extinguisher shall be inspected and replaced twice a year.

(2) Designate a special person to regularly manage and inspect the fire-fighting equipment to ensure that it is in good condition.

(3) Fire fighting equipment should be checked frequently, and the lost or damaged equipment should be replenished immediately and reported to the leader.

(4) The fire-fighting equipment of each department shall be managed by this department, and a special person shall be appointed.

(6) Fire hazard rectification system

1. All departments shall eliminate existing fire hazards in time.

2, in the fire safety inspection, deal with the fire hidden trouble found item by item registration, and the hidden trouble situation written report to each department for rectification within a time limit, at the same time, to make a record of hidden trouble rectification.

3. Before the fire hazards are eliminated, all departments shall implement the preventive measures to ensure fire safety during the rectification of hidden dangers, put forward solutions for major fire hazards that cannot be solved, report to the person in charge of fire safety of the unit in time, and report to the superior competent department of the unit or the local government.

4, the public security fire control institutions shall be ordered to correct the fire hazards within a prescribed time limit, should be corrected within the prescribed time limit and write a reply to the hidden dangers rectification, submitted to the public security fire control institutions.

(seven) fire safety management system.

1, electricity safety management:

(1) It is forbidden to set wires at will, and overload electricity.

(2) Electrical wiring and equipment installation shall be the responsibility of the certified electrician.

(3) All departments should turn off the power supply after work.

(4) Private use of high-power electrical appliances such as electric heating rods and electric furnaces is prohibited.

2, fire safety management:

(1) Strictly implement the hot work approval system. When hot work is really necessary, the operation unit shall apply for a "hot work permit" from the centralized management department of fire control work according to regulations.

(2) Before hot work, the inflammable and explosive dangerous goods within 5 meters near the hot work point should be removed or properly isolated, and appropriate types and quantities of fire-fighting equipment should be borrowed from the security department for standby at any time, and should be returned immediately after the operation. If it is used, it should be reported truthfully.

(3) If hot work is carried out at the site of the operating point, an application shall be made to the competent person at or above the manager level of the unit where the operating point is located, and the application department shall send someone to supervise the site and not regularly send someone to check. When hot work is carried out at a height of more than 2 meters above the ground, it is necessary to ensure that there are full-time personnel below to extinguish sparks that may ignite other items at any time.

(4) If hot work is carried out without a Hot Work Permit, a second punishment will be given, and if the circumstances are serious, it will be dismissed.

(eight) the fire and explosion prevention system of inflammable and explosive dangerous goods and places.

1, inflammable and explosive dangerous goods should have a special warehouse, equipped with necessary fire-fighting equipment and facilities, and the warehouse management personnel must be qualified personnel who have received fire safety training.

2, inflammable and explosive dangerous goods should be classified and stored separately. Flammable and explosive chemicals with conflicting chemical properties or different fire extinguishing methods should be stored separately.

3. Flammable and explosive dangerous goods shall be inspected by the inspection department before storage, and shall be registered before storage.

4, inventory items should be classified stacked storage, each crib covers an area of not more than 100 square meters, not less than one meter between cribs, the spacing between cribs and walls is not less than 0.5 meters, the spacing between cribs and beams and columns is not less than 0.5 meters, and the width of main passages is not less than 2 meters.

5, inflammable and explosive dangerous goods in and out must be carried out in accordance with the safety operation procedures, warehouse staff should stick to their posts, non-staff are not allowed to enter at will.

6. Flammable and explosive places should take fire-proof and explosion-proof measures according to the requirements of fire code, and maintain fire-proof and explosion-proof facilities.

(nine) the organization and management system of compulsory fire brigade

1, volunteer firefighters should be under the leadership of the centralized management department of fire control work to carry out business learning and fire fighting skills training, technical assessment should reach the prescribed indicators.

2, combined with the fire control facilities, equipment, equipment maintenance and inspection, there are plans for each volunteer fireman rotation training, so that everyone has practical skills.

3. Conduct drills every six months according to the fire fighting and emergency evacuation plan, and constantly improve the plan in combination with the actual situation.

4, held once a year fire prevention, fire fighting knowledge assessment, assessment of outstanding recognition.

5, constantly sum up experience, improve the ability of fire prevention and self-help.

(ten) fire fighting and emergency evacuation plan drill system.

1, formulate fire fighting and emergency evacuation plans in line with the actual situation of the unit.

2. Organize all employees to learn and be familiar with fire fighting and emergency evacuation plans.

3, every time before the organization plan exercise should be carefully arranged for the meeting, a clear division of labor.

4, should according to the plan, at least once every six months.

5. After the drill, a review meeting should be held to seriously summarize the situation of the plan drill, and the plan should be revised and improved in time if any deficiencies are found.

(eleven) the inspection and management system of gas and electrical equipment

1. Electrical equipment shall be installed and used correctly according to regulations. Relevant personnel must receive necessary training and obtain valid certificates issued by relevant departments before they can operate. All kinds of equipment must have valid qualification certificates stipulated by laws and regulations, and can only be put into use after being confirmed by the maintenance department. Electrical equipment shall be inspected regularly by certified personnel (at least once a month).

2, lightning protection, anti-static facilities regular inspection, inspection, inspection at least once every quarter, inspection at least once a year and recorded.

3, the load of electrical equipment should be carried out in strict accordance with the standard, the joint is firm, the insulation is good, the safety device is qualified, normal and well grounded, and the grounding resistance should be tested in strict accordance with the requirements of electrical construction.

4, all kinds of lines should be isolated by casing, and under special circumstances, lead or rubber cables with good insulation should also be used. All kinds of electrical equipment and lines should be regularly overhauled to eliminate fire safety hazards that may be caused by insulation damage at any time.

5, without approval, it is forbidden to extend the wire without authorization. All departments should actively cooperate with the security team and maintenance personnel to check whether the extension cord is only for emergency use, whether the shell is in good condition and whether it is put into use after being tested by maintenance personnel.

6, electrical equipment, switch box line near the yellow area according to the standard of this unit, it is forbidden to pile up flammable and explosive goods and regular inspection, eliminate hidden dangers.

7, the equipment should be cut off after use. For untested and officially powered-on equipment, the installation and maintenance personnel should cut off the power supply when leaving the site.

8. It is strictly forbidden to use open flames in the workplace except for departments that have taken preventive measures.

9, the use of open flame department should strictly abide by the safety regulations and operating procedures, do people from the fire, people from the fire.

10. Smoking is strictly prohibited in the workplace, and a no-smoking sign has been posted. Every employee has the obligation to remind others to abide by the smoking ban in public places.

(twelve) fire safety evaluation and reward and punishment system.

1. Those who have made achievements in fire safety work shall be commended or given material rewards.

2. Those responsible for fire safety accidents will be treated differently according to the severity of the consequences. In addition to meeting the national regulations on administrative penalties for public security or being investigated for criminal responsibility, the person responsible for the accident will be handed over to the relevant state departments for legal treatment, and the following acts will be punished according to the provisions of this unit:

(1) In any of the following circumstances, depending on the loss situation and attitude, in addition to ordering compensation for all or part of the loss, a verbal warning will be given:

1. Failing to use inflammable dangerous goods in strict accordance with the operation procedures or improper storage, resulting in fire, fire and little loss;

B, smoking in a no-smoking place or improper disposal of cigarette butts causes a fire, and the fire loss is not great;

C. Flammable articles in the area are not cleaned in time, resulting in fire hazards;

D, unauthorized, illegal use of extended wires, no safety device electricity or unauthorized increase of small load appliances;

E. lie about the fire alarm;

F, without approval, playing with fire control facilities and equipment, without causing adverse consequences;

G. The department manager who fails to rectify the fire hazards put forward by the safety team in time and cannot explain the reasons;

H, blocking fire exits, blocking safety signs, etc. There will be no serious consequences.

(2) In any of the following circumstances, depending on the seriousness and attitude, informed criticism shall be ordered to compensate all or part of the losses:

1. Unauthorized use of inflammable and explosive materials;

B, unauthorized misappropriation of the location of fire control facilities and equipment or use it for other purposes;

C. Violating safety management and operating rules, leaving without leave, causing minor fire alarm and fire loss;

D. Managers who force other employees to operate illegally;

E, found the fire, not timely according to the emergency procedures;

F. Management personnel do not cooperate with the inspection of the security team and refuse to rectify.

(3) Anyone who conceals, fails to report, handle, investigate or provide false information about the accident shall be dismissed.

(four) in violation of fire safety management, causing accidents (minor losses), but can take the initiative to confess, actively assist the relevant departments to deal with the accident, to recover the losses of the perpetrators or responsible persons, can be mitigated or exempted from punishment according to the circumstances.

Responsibilities of the person in charge of fire safety

According to the provisions of Article 6 of the Regulations of the Ministry of Public Security on Fire Safety Management of Organs, Organizations, Enterprises and Institutions, the following fire safety duties shall be performed:

1. Implement fire laws and regulations, ensure that the fire safety of the unit meets the requirements, and master the fire safety situation of the unit.

2. Coordinate the fire control work with the production, scientific research, operation and management activities of the unit, and approve the implementation of the annual fire control work plan.

3. Provide necessary funds and organizational guarantee for the fire safety of this unit.

4. Determine the fire safety responsibility step by step, and approve the implementation of the fire safety system and the operating procedures for ensuring fire safety.

5. Organize fire prevention inspection, supervise and urge the implementation of fire hazard rectification, and deal with major issues related to fire safety in a timely manner.

6. According to the provisions of the fire laws and regulations, establish full-time fire brigade and obligatory fire brigade.

7. Organize the formulation of fire fighting and emergency evacuation plans in line with the actual situation of the unit, and implement drills.

Responsibilities of fire safety manager

According to Article 7 of the Regulations on Fire Safety Management of Organs, Organizations, Enterprises and Institutions of the Ministry of Public Security, the fire safety administrator is responsible for the person in charge of fire safety of the unit, and implements and organizes the following fire safety management work:

1. Make annual fire control work plan and organize the implementation of daily fire control safety management.

2. Organize the formulation of fire safety system and operation procedures for ensuring fire safety, and inspect and supervise its implementation.

3. Draw up the capital investment and organizational guarantee scheme for fire safety work.

4. Organize the implementation of fire inspection and fire hazard rectification.

5. Organize and implement the maintenance of fire-fighting facilities, fire-fighting equipment and fire safety signs of this unit, ensure that they are in good condition and effective, and ensure the smooth evacuation passage and safety exit.

6. Organize and manage full-time fire brigades and obligatory fire brigades.

7. Organize the publicity, education and training of fire fighting knowledge and skills for employees, and organize the implementation and drills of fire fighting and emergency evacuation plans.

8. Other fire safety management work entrusted by the person in charge of fire safety of this unit.

Responsibilities of equipment operators in fire control room

A, responsible for monitoring and using all kinds of fire equipment, shall not be absent without leave, to do a good job of inspection, operation, etc.

Second, be familiar with the basic principles and functions of the fire-fighting facilities system used in this system, master the operation technology, assist technicians in repair and maintenance, and do not dismantle, misappropriate or stop using the equipment without authorization to ensure the normal operation of the equipment.

The third is to confirm the fire as soon as possible, start the relevant fire-fighting equipment in time and accurately, organize fire fighting and evacuation correctly and effectively, be a good decision-making staff, and call the fire brigade directly 1 19, without delay or omission. Upon arrival, the fire brigade must truthfully report the situation, assist firefighters to put out the fire, protect the scene of the fire and investigate the cause of the fire.

Four, fire control room equipment and communication equipment should be regularly checked, and regularly do functional experiments of each system to ensure the good operation of each system of fire control facilities. Do a good job of succession, fill in the duty record, system operation registration form and controller daily inspection registration form.

5. Publicize and implement fire laws and regulations, abide by the fire safety management system, and complete all technical work and daily management with a high sense of responsibility.

Six, actively participate in fire professional training, and constantly improve the professional quality.

Fire drill planning process