5 work plans for production planning

Work Plan Part 1 of the Production Plan

In order to implement the policy of “safety first, prevention first, comprehensive management” and strengthen safety production goals Management, production department work plan. Based on the actual situation of the factory, a production safety work plan for 20xx has been specially formulated, and production safety work has been included in the important agenda. The alarm bell is ringing and the work is unremitting.

1. Full-year goals

Achieve no deaths, no serious injuries, no major production equipment accidents, no major accident hazards throughout the year, and the incidence rate of work-related injuries is lower than the factory-stipulated indicators. Comprehensive The dust concentration qualification rate is above 80 (as shown in the table below).

2. Guiding ideology

It is necessary to be guided by the company's management responsibility for the safety production goals in 20xx, the factory safety work management system as the standard, and the general safety work policy of "Safety First" ", prevention first." is the principle, based on the safety management of workshops and teams, focusing on preventing major accidents in key units and key positions, and implementing various regulations with the breakthrough of correcting illegal command, illegal operations and employee labor protection wear. system, create a new situation in safety work, and achieve a fundamental improvement in safety production.

3. Firmly establish the ideological consciousness of "safety first"

All units and departments must attach great importance to production safety, regard production safety as an important task, and conscientiously implement the " The policy of "safety first, prevention first" will further enhance the awareness of production safety, take practical measures and use real efforts to truly implement the policy of "safety first", and first solve the leadership awareness by further improving the safety production responsibility system. issues, truly put safety production work on the important agenda and put it in the "first" position. Only by attaching importance to safety ideologically can the sense of responsibility be in place, can management and grasp be in place, and can safety responsibilities be implemented in depth and accidents rectified. To avoid hidden dangers, we strictly implement the principles of "whoever is in charge is responsible" and "managing production must manage safety" to ensure safe production.

4. Carry out in-depth special rectification work on safety production

Based on the current situation of the factory, determine the key units and key parts of the safety production work in 20xx, improve the emergency response plans for various accidents, and strengthen Monitor and rectify major major hidden dangers, carefully carry out factory-level monthly safety inspections and special safety inspections, conduct weekly safety inspections in the workshop, and insist on three safety inspections in the class, and require production department, workshop leaders and managers to strengthen daily safety inspections. In safety inspections, for the discovered accident hazards, rectification must be organized in a timely manner in accordance with the principle of "three fixes and four no-turns". If rectification cannot be made temporarily, safety precautions must be taken, especially for gas stoves, boilers, sulfuric acid tanks, liquid Safety precautions for important parts such as ammonia tanks, special rectification work, and management of hazardous chemicals such as flammable, explosive, toxic, and hazardous chemicals must be strictly enforced in accordance with the "Work Safety Law" and the "Regulations on the Safety Management of Hazardous Chemicals" Special rectification is carried out to strengthen safety management on the job site, promptly investigate and deal with illegal command and illegal operations, minimize the occurrence of various accidents, and ensure the normal operation of factory production.

5. Continue to strengthen safety education, training and publicity for employees

The factory educates employees on production safety through classes, pre- and post-work meetings, posters, briefings, etc. , improve employees’ production safety knowledge and operating skills, regularly or irregularly organize employees to learn relevant production safety regulations, laws and production safety knowledge, provide three-level safety education for new employees and those who change jobs, and improve employees’ awareness of production safety and In order to improve self-protection ability and prevent accidents, special operations personnel must undergo professional training, pass examinations and be issued certificates, so that 100% of them can work with certificates. Conscientiously implement the "Safety Production Law" and conscientiously study the "Typical Accident Cases" and the "Production Safety Emergency Meeting Minutes" (Feidian Titanium [20xx] No. 9) issued by the company.

Continuously standardize and strengthen safety production publicity work, carry out in-depth "Ankang Cup" competition activities, make full use of the National Safety Production Month activities in June, and paste safety production slogans, safety topic bulletins, distribute safety brochures, and establish models, etc. Carry out various forms of safety production education and increase publicity efforts to achieve the purpose of promoting the year with each month. Improve employees' awareness of complying with laws and regulations, and enhance safety awareness and self-protection awareness; guide workshops and teams to establish safety culture concepts, strengthen management, and implement responsibilities; closely integrate production safety with ensuring the stability, safety, and development of the factory to achieve The alarm bells are ringing for production safety.

In 20xx, production safety work will continue to adhere to the policy of "safety first, prevention first." and in accordance with the principle of "who is in charge, who is responsible" to further clarify responsibilities and safeguard the overall development of the factory. Set out, maintain the hard-working, hard-working work style of Titanium White, strictly implement the company's safety production work arrangements, control indicators, take active actions, pay close attention to safety production work, and make new efforts for the economic development of the factory to become bigger and stronger. contribute.

Work Plan Part 2 of the Production Plan

In order to ensure the realization of our station's annual safety goals, control abnormalities and near misses, and in combination with the actual situation of our station, this work plan is specially formulated.

1. Organize and supervise the safety activities of the station. According to the "Assessment Methods for Anti-Habitual Violations", the on-duty personnel who commit fraud will be assessed for violations, and summarize the progress of safety activities every month; organize the business of the station Study and compile the station's duty roster; implement the job responsibility system for all station personnel.

2. Supervise and check whether the safety tools are fully equipped and whether the safety tools are in good condition.

3. Check whether the safety labor protection measure plan and anti-accident technical measure plan are complete, supervise their implementation, inspect and supervise equipment maintenance and civilized production, etc.

4. Actively carry out anti-violation and inspection activities, and supervise and inspect violations throughout the process.

5. Supervise and inspect the implementation of standardized duty, and report the implementation of various safety operation systems at the station management meeting every month.

6. Supervise and inspect the firefighting learning and firefighting inspections at the inspection station every month.

7. Supervise, inspect, and stop habitual violations of regulations by the work team at the station.

8. Organize a monthly site obstacle, abnormality and operation safety analysis meeting to point out problems and formulate countermeasures;

9. Develop and organize the implementation of measures to control abnormalities and attempts, Carry out seasonal safety inspections, safety evaluations, dangerous point analyses, etc., conduct detailed inspections as required and supervise the implementation of rectifications.

10. Regularly inspect equipment, understand production operation status, verify equipment defects, supervise the elimination of defects, issue and submit summaries and various reports on time.

11. Preside over the preparations for larger power outages and more complex operations, and conduct on-site inspections.

Work Plan Part 3 of the Production Plan

In July, we will further strengthen the production site management and continuously optimize the production plan, production organization, personnel, equipment, material allocation, etc. Keep the production site clean and orderly, promote standardized production, and promote the 6S management system, and strive to continuously improve production management in August and reach a new level. In short, in order to achieve the expected goals, we will forge ahead despite difficulties, develop and enterprising, carry forward the spirit of being able to endure hardships and fight, start from small things, strictly implement the job responsibility system, strengthen management internally, build an image externally, and strive to achieve solid results through solid Work effectively and successfully complete various task indicators assigned by the company.

1. Develop an assessment system for new and old employees

Evaluate the technical content and labor intensity of the positions. Make appropriate adjustments to the corresponding salary. Really think of ways to retain some old employees. Furthermore, through training and retaining excellent old employees, some waste caused by human factors can be reduced. Machine maintenance was not done properly, and instead of preventive maintenance, the machine was repaired urgently, which wasted time in the production process. In the future, we will increase the intensity of machine maintenance and repair to truly achieve preventive maintenance.

Reduce time wasted on repairs.

2. Increase efforts to control the quality of materials received in the workshop

Strictly supervise and implement the habit of first inspection and self-inspection of workshop employees. Avoid batch defects. Strengthen training on machine operation skills to minimize machine adjustment consumption.

3. Make full use of your own work experience and combine it with the actual situation on site

Find out the root causes of consumption and formulate feasible improvement plans and measures. Strengthen the on-site management of the workshop to ensure that people turn off the electricity, water, lights, etc. Resolutely eliminate waste.

4. Strengthen safety education and training

Let everyone have a deeper understanding of safety and consciously improve their own safety awareness. We conduct self-examination of on-site safety hazards from time to time, rectify problems in a timely manner, and improve safety prevention hardware facilities. Take preventive measures before they happen.

Facing the coming August, I would like to treat every day of the New Year with the fullest enthusiasm and the highest morale. Work together with various fraternal departments. Improve output quality, control consumption, and ensure production safety. I will do my best for the healthy development of the company.

Work Plan Part 4 of the Production Plan

1. In-depth study and implementation of the spirit of the 20xx national, provincial and municipal production safety video and telephone conferences, and firmly establish a sense of safety responsibility.

2. Rename the factory safety department to the safety management department, further improve the software and hardware construction of the safety management department personnel, office equipment, rules and regulations, and ensure that there are dedicated personnel, dedicated posts, and dedicated responsibilities.

3. The factory signs a safety production target responsibility letter with each department and production department to clarify safety responsibilities, () grasp safety key points, clarify work ideas, and promote the orderly development of safety production work in urban sewage treatment plants.

4. Strengthen the construction of safety infrastructure and extend the scope of safety infrastructure construction to the safety standards of production and operation facilities and equipment. All facilities and equipment must be regularly tested, calibrated and maintained in accordance with regulations.

5. Strengthen the construction of the safety team, improve the level of professionalism, increase the safety knowledge and skills training for cadres and workers, organize and carry out safety knowledge and skills training no less than 4 times throughout the year, and carry out emergency drills no less than 1 time.

6. Strengthen the management of laboratory drug procurement, storage, collection, use and other aspects to ensure standardized management.

7. Further improve and implement the "Emergency Plan for Abnormal Water Quality in Jiyuan Urban Sewage Treatment Plant", "Emergency Plan for Electric Shock Accidents at Jiyuan Urban Sewage Treatment Plant", and "Drowning in Jiyuan Urban Sewage Treatment Plant" Accident Emergency Plan" and other emergency plans.

8. Strengthen the inspection of accident hazards, implement rectification measures in a timely manner, adhere to the Friday safety inspection system, and assign responsibility to the discovered safety hazards and make rectifications in place in a timely manner.

9. Strictly implement the regular production safety meeting system, hold regular production safety meetings on time every month, and organize monthly safety production activities, safety production inspections, and special safety rectification activities no less than 12 times throughout the year.

10. Increase investment in safety production funds, promptly replace expired fire-fighting equipment, old and aging power supply lines, replace secondary sedimentation tanks, oxidation ditch life-saving equipment, etc., and invest safety production funds in a planned manner throughout the year Not less than 300,000 yuan.

11. Increase the safety supervision and inspection of the construction of the second sewage treatment plant and sludge disposal project, eliminate safety hazards in a timely manner, and prevent the occurrence of safety accidents.

Work Plan 5 of the Production Plan

1. Strengthen organizational leadership and strengthen safety production management

The community is established with the community secretary as the team leader and relevant staff As a member of the production safety leading group, a safety management network composed of resident group leaders and safety officers from various units has been established to strengthen the leadership and supervision of production safety and ensure the implementation of various measures for production safety.

2. Deepen the long-term management of production safety and promote the implementation of community enterprise responsibilities

1. Implement the "Interim Regulations on the Responsibilities of People's Governments at All Levels, Relevant Departments and Units in Production Safety in the Province" ", improve the awareness of "supervision in accordance with the law and statutory responsibilities", implement safety production in every enterprise, sign a safety production responsibility letter with each enterprise, and implement safety production responsibility to the top leader of the unit.

2. Strengthen the company’s on-site management to ensure that all safety production rules, regulations and measures are implemented. Regularly supervise the on-site safety production of enterprises, urge enterprises to comprehensively carry out accident hazard investigation and management activities, improve the level of safety production management, and improve the level of safety supervision on production sites; strengthen safety production emergency management and improve accident emergency response capabilities.

3. Carefully organize long-term management compliance evaluation to improve the company’s compliance coverage.

4. Supervise enterprises to strengthen the training of safety production knowledge, and require that all positions be held with certificates. The employment rate with certificates should reach 100, and the training rate of new employees should reach 100, so as to improve the safety production quality of enterprise employees.

5. Strengthen the publicity and education on production safety, carefully organize and carry out competition activities such as "Production Safety Month" and "Ankang Cup" to improve employees' awareness of production safety.

6. Strengthen the publicity and education of residents' safety in production and life, and do a good job in safety prevention education such as fire prevention, electricity prevention, and gas prevention.

7. Strengthen fire supervision, focus on fire safety inspections in three-in-one places, and improve fire defense capabilities and disaster relief capabilities.

3. Strengthen the publicity and education of production safety

The community will use windows, posters, banners and other promotional tools to carry out extensive publicity on production safety, so that production safety will be deeply rooted in the hearts of the people and make all residents and All employees of the company are involved in safe production.