Can the motor of the sliding door be connected to the access control fingerprint machine?

Of course. Need to pay attention to the following points:

1. Ensure that the communication mode between the access control fingerprint machine and the motor of the translation door is consistent, such as RS485, Wiegand and other communication standards.

2. Confirm whether the access control fingerprint machine supports communication with the motor of the translation door. Some access fingerprint machines may only support the contact access controller and not directly connect the motor of the translation door.

3. Confirm whether the connection mode of access control fingerprint machine is correct. Usually, the access control fingerprint has interfaces such as door lock output and alarm output, so it needs to be wired correctly according to the wiring requirements of the sliding door motor.

4. Ensure that the permission setting of the access control fingerprint machine matches the permission setting of the translation door motor to ensure safety.

When setting the linkage between the entrance guard fingerprint machine and the translation door motor, it should be set according to the actual scene, such as which users can open the door through fingerprint identification. At the same time, it should be noted that the linkage setting needs to be set according to the requirements of access control fingerprint machine and translation door motor to ensure its reliability and safety.