Basic steps for learning to drive

First lift the clutch to half linkage, then slowly lift the clutch while applying oil. This is the most commonly used and versatile starting method, and can be used for starting on flat roads or on slopes. The key point is to master the semi-linked position of the clutch. It is very easy to find the semi-linked position and start. In current models, as long as the clutch semi-linkage position is raised, the car can start on a flat road, even if the oil is not supplied, so you can use this to practice more on flat roads and find the combination point.

Gently apply oil first, then lift the clutch. In fact, this method of starting is almost the same, that is, first lightly step on the accelerator, maintain the speed at about 800 to 1000 rpm, and then slowly lift the clutch to start. This method can effectively avoid stalling due to insufficient starting power, but if the throttle is not controlled well, it will Give it a run and turn off the flame. And this starting method is not suitable when driving on slopes.