Work safety in production should be done in the process of production activities to avoid accidents as much as possible, right?

Work safety in production should be done in the process of production activities, so as to avoid accidents as much as possible, right?

I think it is wrong.

First, safety work should be carried out in the whole process, from preparation, start, process and end.

Second, whether it should be avoided as much as possible, It's about putting an end to accidents

I hope it can help you how to avoid accidents in production safety

Prevention and handling system of accidents in production safety

1. Project leaders and safety inspectors at all levels conduct regular and irregular safety inspections, and the inspection process should be strict and serious, so as to find and eliminate potential safety hazards as much as possible and try to nip in the bud.

2. Strictly implement the Regulations on the Reporting and Handling of Occupational Casualty Accidents in Enterprises promulgated by the State Council, and do a good job in the investigation, handling and statistical reporting of casualty accidents in a timely, accurate and realistic manner.

3, after the casualty accident, first rescue the wounded, at the same time protect the scene. In order to rescue the wounded and prevent the accident from expanding, it is necessary to make signs, record and draw the site map in detail when moving the site objects.

4. After the serious injury or above casualty accident, the relevant personnel on site should immediately report to the competent department step by step. What supervision should be given priority to in the work of production safety

The work of production safety should be based on: an effective production safety organization. Second, strict and feasible strict rules and regulations. Third, the inspection mechanism in place. Four, serious and true inspection records as scheduled. What should be paid attention to in avoiding production safety accidents in the process of scheduling and directing production?

Papers on enterprise safety production In enterprise safety production activities, people usually call managers' requirements for employees' safety standards "asking me to be safe" and employees' conscious safety behavior "I want to be safe".

The two formulations not only express different language concepts, but also have different security implementation methods and management effects. "Want me to be safe" is a guest. Safety in production should be based on?

work safety in production should be based on ().

A, active prevention b, safety inspection c, publicity and education d, accident investigation and handling

Answer: Choose A.

Summary of substation safety production activities

November 15th to December 15th, 27 was our company's safety production month. * * Substation carried out colorful and diverse concrete actions around the theme of "laying a solid foundation, improving quality, setting a benchmark and striving for first-class": publicizing the policy of safety first and prevention first through billboards; Through 48+4 learning opportunities, conduct a big discussion on safety in production; Inquire about the hidden dangers of this site through safety activities. It has formed a good atmosphere of "everyone learns to be safe, and all levels of responsibility ensure safety", which has made the safety production work of our station go to a new level.

The specific work of this site's safety production month activities is as follows:

1. Carry out the publicity work of safety month activities, and everyone will sit together to discuss the theme of the activities, learn the implementation outline, and discuss the activities arrangement at each implementation stage. Deeply reflect on the 11.3 accident and draw lessons from the accident. Everyone wrote a reflection on the 11.3 accident, and talked about their own views and suggestions on the safety management, record reports, rules and regulations, training work and accident hidden dangers of this station. Everyone devoted their greatest enthusiasm to the management of the station. It can be seen that the touch of 11.3 on every attendant is unforgettable, and the necessary development of the safe month will promote all the work of the substation, especially the duty.

2. Carry out in-depth safety inspection activities. On the basis of the safety production rectification week, combined with the autumn safety inspection, the hidden dangers of safety production in this station were further investigated, especially the establishment, perfection, perfection and implementation of various rules and regulations, and the on-site implementation procedures were revised comprehensively, concretely and pertinently; Formulate the anti-accident plan for power failure of the whole station, formulate anti-accident measures for low temperature weather and ice flash prevention, and conduct on-site drills. At present, it is in a sensitive period after the customs clearance and personnel adjustment at the end of the year, and the staff's thinking fluctuates greatly. Moreover, this station is preparing for the operation of the new bus and the new interval. There are many construction workers, and the safety awareness and safety prevention skills of the construction workers are low, which is a major hidden danger in the safe implementation of our station in the near future. We will discuss the existing and potential hazards in the construction process together with the working person in charge, and make targeted preventive measures to ensure the construction safety. In view of the uneven quality of personnel and different safety awareness, we have formulated the Detailed Rules for Assessment of * * Station, formulated measures, defined responsibilities and working procedures, and made full preparations for any possible situation.

3. Using the time of shift change, we inquire about the hidden dangers existing in our station, and divide the responsibility into sections, and the responsibility lies with people. We summarize and analyze the hidden dangers found, and promptly and seriously eliminate those that can be solved by ourselves. Those that cannot be solved due to the lack of capacity of our station are incorporated into the occupational safety and health system of the work area, which is responsible for solving them. The reported defect reports the defect, and the reported hazard identification reports the hazard identification, so that all devices, all work and all dangerous points in the station are under control, controllable and controllable.

4. For the work and operation carried out in this month, we have worked out accident plans, such as the preparation for replacement of 22KV bus differential protection and the suspension painting work. In addition to the arrangement and tracking of the work area, the station changed from three shifts to two shifts according to the new adjustment of personnel and the unfamiliarity of new personnel with the device, which strengthened the duty force and ensured the smooth completion of all the work. In order to prevent accidents, we worked out an anti-accident plan for bus failure during work.

5. Each class used the time after dinner to discuss and check what gaps still exist in the compliance system of our station, and whether the existing rules and regulations can meet the needs of on-site standardization and standardization work, and read out and implemented the Detailed Rules for Assessment of * * Station in the station, and divided it into 12 members to manage the affairs of the station according to their personal abilities, stipulating that each attendant must work in accordance with the rules and regulations, otherwise it will be strictly assessed. In the gap between personal professional skills and job requirements, the training plan is made according to people's needs, and the training platform of mental gas station and personal promotion plan is established for training. Work logs, maintenance records, safety activities, safety appliance records, defect records and other team records have been communicated with the work area, and the record format has been improved.

6. Train the duty officer of the whole station in the Electric Power Safety Work Regulations, the safety responsibilities of this post, the identification and preventive measures of dangerous points in the work and the rules and regulations of related majors, and send two duty officers to participate in the safety competition held in the work area, so as to train the duty officer to have the safety production skills required by the work and be familiar with the dangerous points and preventive measures of each work;

7. Improve the "three votes" management system, and implement the "three votes" management system according to the occupational safety and health management system of the implementation work area according to the actual situation of this station, with perfect contents; The "three tickets" shall be implemented in accordance with the regulations, and the "six customs" system of switching operation shall be strictly implemented (operation preparation customs, order receiving customs, operation ticket filling customs, chart checking customs, operation monitoring customs and quality inspection customs); The filling and implementation of the "three votes" are in good condition. The "three votes" management system is sound, and the "three votes" qualification evaluation standards and assessment regulations have been formulated; The "three votes" qualification evaluation meets the standard requirements, and the improvement measures can be put forward in time for the problems found, and the records can be checked; Statistics, analysis and evaluation of the implementation of the "three votes" on a regular basis.

8. Review the Implementation Management Standard of Cangzhou Power Supply Company and implement relevant management regulations. Improve the "Regulations on the Administration of Integrated Self-service Stations" of our station, and formulate measures to strictly implement them. Inquire about the management of five prevention systems and software defects, report them in time, and ask the manufacturer to sell the defects. Inquire about the implementation of the on-site anti-misoperation locking device and report the defects in time; Establish and improve the management system of unlocking keys, and strictly implement it; Strictly implement the operation monitoring system, revise the operation password again, and strictly manage the password, so that the implementation of the operation monitoring system has conditions from an early age. What is the work pattern of safety production?

from horizontal to vertical

reason: the responsibility system for production safety is the core and foundation of the work of production safety, and the implementation of the responsibility system for production safety should be fully covered from horizontal to vertical. The monthly summary of work safety

emphasizes the importance of safety and management.

mainly write down the main work content, how to work hard, and the achievements made, and finally put forward some reasonable suggestions or new efforts.

Work summary is to let the superior know what contribution you have made and reflect the value of your work.

So you should write a few points:

1. Your understanding of the post and work

2. What have you done specifically

3. How do you work hard and what things are solved by your brain. Even if it's nothing, write some difficult questions. How did you solve them through hard work?

4. What abilities or knowledge do you need to improve in your future work?

5. The superiors like people who work actively. You should be prepared for everything in your job, that is, the preparatory work is as follows for your reference:

Summary is to make a comprehensive and systematic overall evaluation and analysis of the situation in a period of time, and analyze achievements, shortcomings and experiences. Summary is a kind of applied writing, which is to think rationally about the work that has been done.

Basic requirements for summary

1. Summary must have an overview and description of the situation, some simple and some detailed.

2. Achievements and shortcomings. This is the main content of the summary. The purpose of summing up is to affirm achievements and find out shortcomings. What are the achievements, how big they are, in what ways, and how they were achieved; How many shortcomings there are, what aspects they are manifested in and how they are produced should be clearly written.

3. Experience and lessons. In order to facilitate the future work, we must analyze, study and summarize the previous work experience and lessons, and form theoretical knowledge.

Points for attention:

1. Be realistic, the achievements are basically not exaggerated, and the shortcomings are basically not narrowed. This is the basis of analysis and drawing lessons.

2. Be clear. The sentence is fluent and easy to understand.

3. Be specific and appropriate. There are important things and minor things, and you should highlight the key points when writing. The problems in the summary should be divided into primary and secondary and detailed.

The basic format of summary:

1. Title

2. Beginning of text

: overview and overall evaluation; Summarize the full text.

main body: analyze the shortcomings of achievements and sum up experiences and lessons.

conclusion: analyze the problem and make clear the direction.

3. Signature and date of signature

. Why are new employees prone to safety accidents in the production process?

before new employees take up their posts, they must receive training, especially safety education and training disclosure.

Main learning contents:

1. Introduce the general situation, scale and development prospect of the enterprise, encourage employees to work actively and contribute to the prosperity of the enterprise;

2. Introduce the company's rules and regulations and job responsibilities, so that employees can consciously abide by the company's rules and regulations in their work;

3. Introduce the internal organizational structure and power system of the enterprise, the service coordination network and process between departments, and the handling feedback mechanism of relevant departments;

4, business training, so that new employees are familiar with and master the main skills and related information needed to complete their own jobs, so as to quickly become competent;

5. The key is to learn the safety measures of enterprises, so that employees can know what safety work includes, how to do safety work well, how to find and deal with common problems in safety work, and improve their safety awareness;

6. Introduce the behavior and manners of employees in enterprises. Such as requirements on professional ethics, environmental order, work and rest system, expenditure regulations, contact and service terms, appearance, mental outlook, speech and dress. Work report on factory safety production

There are some cases for reference only.

Summary of Safety Production Month in 25 of No.9 Team of Shandong Flood Control and Drought Relief Mobile Corps

We received the Notice on Establishing Safety Production Month in 25 from Laiyang Water Resources Bureau, and we resolutely implemented it according to the spirit of archives. To prevent and reduce production safety accidents, ensure the safety of people's lives and property, and do a good job in safety work as the primary task of the unit. Now, according to the requirements of "Safe Production Month" archives, we will summarize and report the activities of "Safe Production Month" as follows:

1. The leaders of the unit and the safety production team attached great importance to

After receiving the notice, the leaders of the unit and the safety production team attached great importance to the activities of "Safe Production Month" and arranged them in person. On May 25th, the monthly arrangement, arrangement and requirements of safety activities will be distributed to all departments of the unit and the project office in the form of safety production notice. All departments of the unit and the project department carried out safety production month activities such as safety production publicity, education, training and communication according to the unified arrangement and requirements of the company.

in February and June, the unit carried out safety education in the form of blackboard newspaper and publicity column according to its own actual situation, and put a publicity board in front of the unit, "I want to be safe and realize zero accident month". So that every department and every employee can fully understand the importance of safe production. In the whole unit set off a new * * * to learn the knowledge of safety in production.

third, according to the requirements of the archives, the unit safety production team (including the unit leaders) organized personnel to conduct a comprehensive safety production inspection of all departments according to the characteristics of the unit's safety production work and the activities of "major inspection, strict management and strict monitoring" carried out in the city. Carefully inspect the office space and dormitory area of each department of the unit. Organize relevant personnel to conduct an all-round inspection of Xiajia and Xiaoping Reservoir construction areas, including the engineering site, office space, living facilities and other parts; Construction vehicles, fire safety and construction safety technical measures; Installation and construction focus on aerial work, hoisting work, cross work, etc. In particular, the key inspection of flood control engineering facilities was carried out, and the problems detected were immediately rectified. Overall, the security situation is good.

Fourth, the project safety organization is established, the safety responsibility system is clear, and the employees operate according to the safety production management regulations

When each project department is established, it can first be based on < < Safety production management of the unit. > > Measures to set up a leading group for security organizations. Some projects under construction can be adjusted in time due to personnel changes; The responsibility system for safety shall be implemented in all departments, teams (sections), teams and groups and everyone, so that everything in safety is managed and implemented; All types of work can be carried out according to the safety production management regulations and safe operation methods, which are basically standardized and standardized.

5. Conduct safety education, safety meeting, safety inspection and safety rectification regularly and irregularly

Conduct safety education and special training on safety production. According to the work characteristics of the unit, combined with the "safety production activity month", the three-level safety education and post safety production training for employees were carried out.

Carry out on-the-job training, and make employees become on-the-job experts as soon as possible through passing, helping and guiding activities. Seriously organize workers' studies