What are the components of floor-type fastener-type steel pipe scaffold?

Shelf tube, right-angle fastener, rotary fastener, connecting rod, pedal.

At the intersection of longitudinal horizontal bar and longitudinal horizontal bar, transverse horizontal bar must be set and fixed with longitudinal horizontal bar. Under the vertical pole, there should be a base and a pad. The whole scaffold should be provided with necessary supports and wall connection points to ensure that the scaffold becomes a stable structure. The erection of floor-type double-row fastener-type steel pipe scaffold should generally be built in a continuous circle around the building. If it is impossible to form a circle due to conditions, necessary lateral supports should be set at the opening and a point to strengthen the wall should be set at the end.

Extended data:

Precautions:

Check and accept steel pipes, fasteners, scaffolding, adjustable supports, etc. Qualified components shall be classified according to varieties and specifications, neatly and stably stacked, and there shall be no water in the stacking area.

The elevation of the bottom surface of the vertical pole base should be 50 mm ~ 100 mm higher than the natural ground. The base and pad shall be accurately placed on the positioning line, and the length of the pad shall not be less than 2? After the scaffold foundation is accepted, according to the requirements of construction organization design, stow-wood with a span of not less than 50 mm and a width of not less than 200 mm shall be placed.

Baidu encyclopedia-fastener-type steel pipe scaffold