Joke Collection Website - News headlines - Six bank safety inspection reports
Safety inspection report 1
In order to ensure the safety of one party, school and teachers and students, our school has long regarded safety as a top pri

Six bank safety inspection reports
Safety inspection report 1
In order to ensure the safety of one party, school and teachers and students, our school has long regarded safety as a top pri

Six bank safety inspection reports

Safety inspection report 1

In order to ensure the safety of one party, school and teachers and students, our school has long regarded safety as a top priority. We have set up a special class for safety work, and often carry out major inspections of campus safety work on a regular basis, and are diligent in small inspections on an irregular basis.

Recently, the safety management class of our school conducted a thorough self-examination of the school buildings on the whole campus. The self-inspection is now reported as follows:

1. Person in charge of management organization: xx deputy head: xx member: XX II. Self-inspection report 1. Strengthen publicity. We wrote down fixed safety slogans in eye-catching places on campus, such as "There is no small matter in school, and safety is greater than the sky" and "Safety work should be paid attention to all the time" and so on.

2, management in place, often unremitting.

Regularly investigate, monitor and rectify hidden dangers in campus buildings. School safety work is persistent. Recently, we found some problems through the self-inspection of school building safety and reported them to the General Education Section:

(1) The wall of the comprehensive building in our school is seriously cracked, and it is estimated to be a C-class dangerous building.

(2) There are obvious cracks in the east wall of our teaching building from the first floor to the fourth floor, because the foundation is too weak.

(3) Because the heavy vehicles in the precast slab factory often walk outside the wall, the west wall of our campus is seriously inclined and cracked.

(4) The bungalow on the west side of our left-behind center is relatively large. This bungalow includes canteen operation room, dining room, storage room, student boiling room, bathroom and so on. This is a place that teachers and students must visit several times a day. However, this place can't give people a sense of security. Because the roof bridge of this bungalow is too small, the herringbone frame doesn't look very strong, and the tile surface appears wavy and sparsely covered. When it rains, the house becomes a river.

The above-mentioned "dangerous walls" and dangerous houses are in urgent need of maintenance, and the maintenance funds will not be a small sum. However, our school has no financial resources to solve the problem. I hope our general education department can help our school and strive for special funds for reconstruction. In a word, school safety is the top priority and we must make unremitting efforts. Our safety management must be institutionalized, standardized, concrete and regular.

Safety production self-inspection report II

Check yourself carefully according to the requirements of xx document and the provincial food safety assessment plan. In xx years, the leaders of the township party committee and government attached great importance to it, paid close attention to its implementation, earnestly grasped the food safety supervision within the jurisdiction of my township, and ensured the zero occurrence of food safety accidents in my township. The self-inspection of food safety in our township is hereby notified as follows:

First, leaders attach importance to the implementation of regulatory responsibilities. A "Food Safety Leading Group" has been set up in my township, with leaders in charge as the group leader and members from police stations, comprehensive management departments and health departments. The leading group is responsible for inspecting all food processing and retail shops and restaurants within its jurisdiction, urging them to keep food purchase orders on a monthly basis and strictly controlling food processing, circulation and consumption. At the same time, we signed letters of responsibility for food safety with villages, and implemented the responsibility of village cadres to supervise the slaughter of livestock and poultry and the processing of agricultural products in their villages. And set up 1 food safety information officers in each village to ensure that they know the food safety situation at the first time.

Second, widely publicize and raise people's awareness of food safety. In xx, with the theme of "* * * Building a Honest Home and Building Food Safety Together", my hometown has widely publicized food safety knowledge, firmly established people's food safety awareness and improved people's self-protection ability by posting publicity slogans and distributing publicity materials.

Third, departments should cooperate to carry out food safety inspection in a down-to-earth manner. Regular and irregular joint police station, comprehensive management office, Chengjiang Industrial and Commercial Branch, health center, safety production management office and other relevant functional departments, to conduct in-depth and detailed inspections of surrounding food processing points, supermarkets, markets, catering services, schools, shops, etc.

1, severely crack down on illegal use of additives by food processing shops without a license. Check the shops and catering services in towns and villages, and find that there is no license to operate. No illegal use of additives was found in various halogen products and cooked food processing shops.

2. Strengthen the inspection of the "three noes" food in the store. The staff of xx Industrial and Commercial Branch and Township Police Station inspected the shops around the school, and seized more than 300 pieces of more than ten kinds of "three noes" food, so as to eliminate food safety hazards in time.

3, environmental sanitation, in the inspection, there are sanitary conditions can not meet the standard, shall be ordered to rectify on the spot.

4. Strengthen the food safety of canteens in crowded places such as schools and construction sites. My township organizes education, health centers, police stations and other relevant departments to conduct safety inspections on the canteens of primary and secondary schools, kindergartens and construction sites, requiring the canteens to be clean and tidy, and improving the health management system to ensure the health of students and the masses.

Safety production self-inspection report 3

Under the leadership of the county safety supervision station, combined with the actual situation of the company, a major inspection of production safety was seriously carried out, and the self-inspection situation is now reported as follows:

First, the implementation of the responsibility system for production safety

In order to clarify the responsibilities, a safety production leading group was established with the company manager as the team leader, the deputy manager in charge of safety as the deputy team leader, and the project manager and full-time safety officer as members. Establish the concept of "people-oriented, safety first" in the work, and put forward the requirements of "safety must be managed and understood in production" for the management personnel of each project department. Each project department is equipped with full-time security officers, and has formulated a post responsibility system for safety production suitable for the characteristics of the project department. The responsibility system for production safety is decomposed layer by layer, and the main body of responsibility is strictly implemented, so that the responsibility is clear, the responsibility goes to people, and the work of production safety is carried out smoothly.

Second, check the situation.

1, the implementation of safety production responsibility system and various safety management systems of each project department;

2, the implementation of safety protection facilities on the construction site;

3. The implementation of safety measures such as fire prevention and heatstroke prevention during construction;

4, the construction site of vertical transportation equipment, scaffolding, construction electricity, template support and "three treasures four" protection and other safety special rectification;

5. Whether the safety information on the construction site is complete and standardized, the implementation of the rectification of potential safety hazards and the cancellation of cases;

6, all kinds of safety management personnel and special operations personnel related certificates.

This time, I mainly inspected xxx project department, xxx project department, xxx project department and so on. The inspection shows that the awareness of safety production of each project department has been greatly improved, and the safety management of the construction site has been strengthened. Can conscientiously implement the responsibility system for production safety and various safety management systems, equipped with full-time security officers, safety management information gradually standardized. The "five certificates and one map" on the construction site can basically be set in place, and the construction is basically closed.

It is worth mentioning that my xxx project department can firmly establish the consciousness of "quality first, safety production is more important than Mount Tai" and actively carry out the activities of "safety and quality standardization demonstration project", which has continuously improved the management level of safety production and civilized construction and won unanimous praise from the owner's department.

Third, there are problems.

1, Ideological education: Some employees are lax and paralyzed about safety work, and there is a paralyzed mentality that the accident has nothing to do with me. They violate labor discipline at work and take chances.

2. Safety data: A few project departments failed to collect and sort out according to the provisions of the company's construction site safety management measures, and the special safety construction plan and safety technical disclosure data were incomplete.

3. Civilized construction: some materials on the construction site are piled up in confusion, warning signs are hung improperly, and fire-fighting equipment is arranged irrationally.

4. Scaffolding: scaffold materials in a few construction sites are poor, sweepers and scissors are not tied in place, and scaffolding boards are not laid in place as required.

5 "Three treasures, four ports" protection: very few workers on the construction site do not wear safety helmets.

6. Power consumption for construction: the distribution box of some project departments is damaged and unlocked, and the power cord suspension is not standardized.

Four. Handle opinions

For the project department that fails to construct safety production according to the company's specifications in this safety inspection, it is required to carry out rectification and put it in place, and informed criticism will be punished according to the company's management system.

Verb (abbreviation of verb) the next stage of work

1. Require all project departments to firmly establish the policy of "safety first, prevention first, comprehensive management", strengthen leadership, enhance safety responsibility awareness, and truly implement safety production.

2. Seriously study laws, regulations and relevant provisions, further implement the safety responsibility system at all levels, do a good job in safety disclosure of various projects, strictly implement safety operation procedures, increase education and training for workers' safety production, and further improve the standardization of safety management information.

3. Strengthen self-examination and self-correction on the construction site, strictly implement the system of holding certificates for safety management personnel and special operations personnel, and extensively carry out publicity and education on safety production of construction personnel to further improve safety awareness.

4. Establish and implement the industrial injury insurance system. Each project department should handle work-related injury insurance for employees, organically combine work-related injury insurance with construction safety management, and further improve the safety and security of employees.

5. Highlight key points and continue to deepen the special rectification of hidden dangers of production safety accidents.

Further promote the site management of safety standardization. Organize a monthly and quarterly safety inspection regularly, strengthen on-site inspection, and nip hidden dangers in the bud.

Safety production self-inspection report 4

In order to respond positively to the spirit of document no.9. [20xx] 173 "Combating illegal activities and ensuring safety in production" issued by the Municipal Drug Administration. In order to do a good job in drug safety production, our company organized a special meeting, demanding a unified understanding from the ideological point of view and fully understanding the importance of safety production.

I. Organizational leadership

At the meeting of165438+1October 9th, our company set up a leading group for self-inspection of drug safety hazards. The general manager of the company is the team leader, and the leaders in charge of each department are the deputy team leader. And fully and seriously study the implementation plan to ensure the authenticity of the self-inspection and ensure that it is responsible for the company. Unified leadership, unified arrangement, unified deployment and implementation. To study and decide to solve the problems existing in the investigation and rectification of production hidden dangers and coordinate the rectification work.

Group leader

Deputy team leader:

Members: workshop directors and operators.

Second, the scope and characteristics

Scope of inspection: In the process of drug production, inspection and storage, all hazards in the whole plant are thoroughly and meticulously investigated and rectified.

Inspection focus:

1. Warehouse: the environment for storing raw materials and finished products;

2. Quality Department: Chemicals and drugs that may be confused should be stored in different regions; The public security department should strengthen the monitoring and management of dangerous chemical reagents and put them on record.

3. Production workshop: Operators conduct standardized operation and management according to gmp requirements.

4. General Department: responsible for carefully checking the power cord, fire hose, fire fighting equipment, fire escape, etc.

Third, check the content.

The person in charge of each department shall organize the personnel of this department to conduct self-inspection and hidden danger investigation, and check the implementation of each link, post and safety measures.

Fully implement the safety production standards of pharmaceutical industry, standardize and improve safety management, and improve the production level of enterprises; Improve various safety rules and regulations and requirements, and find out the hidden dangers such as the implementation of post responsibilities, infrastructure, technical indicators, environmental conditions and prevention and control measures. Specifically, it includes the following contents:

1, implement the responsibility system for production safety, and the person in charge of the enterprise and the person in charge of safety shall sign the responsibility book, and the person in charge of safety shall sign the responsibility book with the implementer to ensure that the responsibility is implemented to people.

2. Implementation of safety production laws and regulations According to the requirements of relevant laws and gmp specifications, the safety measures of various departments shall be implemented. In production, inspection and storage, alarm and fire fighting equipment should be equipped, and anti-static and explosion-proof devices must be installed in key parts of the equipment.

3, major hazards, important equipment, link hidden danger investigation and rectification monitoring and emergency management, hidden danger investigation and rectification to establish files. Flammable raw materials and packaging materials shall be recorded.

4. Emergency management

(1) According to the specific requirements of the Guidelines for the Preparation of Emergency Rescue Plans for Hazardous Chemicals Accidents (formulated by the company), and in combination with the actual situation of the actual production and use of hazardous chemicals, a perfect emergency plan is formulated. Organize employees to conduct fire emergency drills at least once a year and keep records.

(2) In recent years, our company and county fire brigade have held large-scale exercises at least twice a year, which is conducive to improving the awareness of safety production and mastering emergency methods. At the same time, it has enhanced the understanding of fire control work, promoted the development of military-civilian relations, and deepened the importance and necessity of safe production.

Third, the inspection results

All instruments, meters, pressure pipes, pressure vessels and production equipment of xxx Company meet the national safety standards, the production process is reasonable, and the environmental sanitation of the factory area meets the requirements of the national county-level hygiene establishment.

5 copies of safety production self-inspection report.

Since the launch of safety inspection activities, under the leadership of the competent manager, the company's security department has earnestly implemented the arrangement of inspection activities. Immediately carry out in-depth self-examination and self-correction activities in the company. The progress of this work is now reported as follows:

First, check the formulation of rules and regulations:

Under the leadership of the leaders in charge, the company's security department conducted a comprehensive inspection of the company's existing safety production rules and regulations. Complement, establish and improve the company's safety production management files, establish the safety production responsibility system of the engineering company, the safety production fund guarantee system, the top-down safety production grid diagram of the engineering company and the safety production responsibility of the company manager, the safety production responsibility of the company's deputy manager in charge of safety production, the safety production responsibility of the company's safety department, the safety production responsibility of the company's on-site project manager and the safety production responsibility of the company's on-site safety officer. The company's production safety responsibilities include doorman, security guard, fire fighting and theft prevention, and formulated the company's production safety accident emergency plan, the company's duty system and flood prevention emergency plan, the company's fire safety emergency plan, and the company's electricity safety emergency plan. It also established and improved the company's production safety operation procedures and the production safety inspection and assessment system for various types of work. New workers' pre-job safety training and education system, records of safe use of equipment and facilities, records of certificates for special types of work, records of safe driving and maintenance of vehicles, and safety production reward and punishment system. The establishment of various safety production systems has provided a solid guarantee for the company's future safety production work.

Second, check the company's production safety situation:

The safety production of engineering companies is characterized by many points, wide coverage, complex line factories and types of work. It is difficult to do a good job in safety production only by relying on the full-time staff of the existing safety department, so the safety department of the company has found a way to do a good job in safety production after a long period of exploration.

1, implement the responsibility for production safety, and pay special attention to the main responsible persons.

The company's main safety problem is to do a good job in safety production at the first-line production site. Therefore, the company stipulates that all newly established production project departments must be equipped with four people, namely, project manager, technician, safety officer and material officer, among whom the project manager is the person in charge of the project and the first person in charge of the safety production of the project, and the on-site safety officer is the person in charge of the daily safety production and safety inspection on the construction site. The safety department of the company specifies the safety responsibilities of the project manager and the site safety officer in detail. Only by paying special attention to the work of project manager, branch supervisor and on-site safety officer can the safety department of the company ensure that there is no problem in the whole first-line production.

2. Formulate safety inspection and assessment standards and persevere in safety inspection.

Formulate systems, implement responsibilities, and check and assess. The safety department of the company has established three inspection systems: daily inspection, monthly inspection and year-end inspection. Daily inspection is to arrange full-time personnel to inspect all construction sites and factories every day, eliminate potential safety hazards in time or notify rectification, and make records for re-inspection. The company organizes on-site safety inspection every month, and the safety section focuses on the safety production at each site. Look at the site, check the records, and put forward rectification opinions or warning fines when finding safety problems. At the end of each year, the safety department of the company puts forward reward and punishment measures according to the performance of safety production management of various project departments and branches throughout the year, so as to encourage all subordinate units to pay full attention to and do a good job in safety production management.

3. Pay special attention to the safety management of hazard sources and make emergency treatment plans.

In the safety inspection, the safety section of the company focused on three aspects, such as the hidden dangers of production safety accidents, and formulated an emergency response plan.

(1) The "Memorial Forest" cemetery managed by the company has been buried more and more for many years, with a large turnover of personnel, and it is located in a cold forest area, which has a great responsibility for fire prevention, especially during Tomb-Sweeping Day, November and October, which brings great difficulties to safety work. The company transferred more than 30 people from various departments and units to form a safety fire prevention led by the company's manager in charge. The daily safety and fire prevention work is organized by the Memorial Forest Office, with 5-7 staff on duty all the year round, responsible for the prevention and control of safety and fire prevention work.

(2) In the company's warehouse and vehicle maintenance workshop, the security department has formulated strict fire safety rules for the company's warehouse, equipped with multiple fire extinguishers, and arranged five personnel to be on duty 24 hours a day to monitor safety and fire prevention and theft prevention. The company's automobile maintenance workshop has formulated a strict safety management system and work handover specifications, strictly disclosed before work, and operated in accordance with operating procedures. Do a good job in pre-job training for special types of work, show certificates, and often study safety laws and regulations to make them persevere.

(3) In the workshop of the company's woodworking and machine repair factory, the power lines in the workshop were investigated, including the aging degree of the lines, the flexibility and use of various electrical switches, the stacking of wood in the workplace and the necessary escape routes. Strictly check the operating rules of production workers and whether the fire extinguishers are complete. , to ensure foolproof in the process of work.

Three. Problems in safety production In this safety self-inspection, some problems with hidden dangers were found.

(1) The safety production slogans and signs on the site where the project department is located are seriously damaged.

(2) Some temporary workers employed by the Project Department failed to register and report the personnel details as required.

(3) Some temporary workers employed by the Project Department are older.

In view of the existing problems, the company's deputy manager in charge of safety instructed a serious investigation of the safety slogans and signs of the whole company, and all the damaged and worn ones were replaced. In view of the problem that some foreign employees in the project department are not registered, all project departments are required to register and report the foreign temporary workers in the Year of the Rooster within a time limit. For the aging problem of existing temporary workers, it is necessary to explain the existing security risks and benefits to the project department and ask them to retire step by step. At the same time, we should pay attention to avoid such problems when hiring temporary personnel in the future.

Safety production self-inspection report 6