Three-wire connection method of taxi empty lamp

If only the original wire is connected, the brightness will be insufficient. The following wiring methods can achieve good results, require welding tools and some welding techniques, and must be operated in this order. When operating, be sure to cut off the power supply, or unplug the empty lamp plug, or weld the positive and negative wires on the board, and operate carefully.

Before refitting, please ensure that the control state of the original lamp is completely normal. Finally, before installation, please make sure to wrap the connector and put insulating paper in the middle.

Extended data:

Precautions for users to take taxis:

1, users are advised not to take informal taxis: informal taxi drivers may not even have a driver's license, which may be harmful. So we need to know which local taxis are regular and which are black taxis.

2. Users should remember the license plate number before getting on the bus: remember the license plate number by taking pictures. In case you forget to take something after getting off the bus, you can find the driver's information through the license plate number to the taxi company, and then retrieve the lost thing.

3. It is suggested that users remember to dial the meter and ask for tickets: users should generally ask the driver to dial the meter when getting on the bus. If users come to a new city, many taxi drivers may see that users are foreigners, and if they don't know the situation, they will overcharge users. In fact, it won't cost that much.