What is a car assembler?

Assembler assembles several parts repeatedly like a robot in a few minutes (usually 1 ~5 minutes), which is more complicated depending on the instructions to replace different parts. The general assembler does not need any skills and experience. Beginners are nervous at first, but they relax when they are proficient.

When the frame is welded, the engine, gearbox, transmission shaft, brake, brake, cable, wire, interior, seat, oil pump and oil tank are all installed and debugged by the automobile assembler. After the assembly is completed, the test will be carried out, and then the whole vehicle will go offline.

Extended data:

1. Make sure the working voltage of this model (12V or 24V) before assembly, and then connect and assemble it according to the line connection table, otherwise the brightness enhancer will not work normally and the electrical components will be destroyed.

2. The red line of the power supply of the brightness enhancer is directly connected to the positive electrode of the battery, and then connected to two headlight sockets. One end of the power supply is connected to the brightness enhancer socket (the other end is suspended) to complete the wiring.

3. Assemble 4-lamp series vehicles, and all headlights are equipped with 60-watt bulbs. The circuit of the brightness enhancer must be changed to a 2-lamp system, otherwise the generator will be overloaded, the circuit of the brightness enhancer will be burned out due to excessive current, and some cars will also lose battery power.

Baidu encyclopedia-automobile assembler