Experimenter personal work summary

Personal work summary of experimental personnel

Carrying out personal work summary of experimental personnel can make the experimental personnel pay attention to the quality of work and promote the improvement of the quality of experimental work. The following is a summary of the personal work of the experimenters that I have carefully compiled for you. You are welcome to read it.

Article 1: Summary of personal work of experimental personnel

Since joining the work, we have complied with the rules and regulations of the company and the project department, actively obeyed the leadership’s work arrangements, and successfully completed the work Tasks, safeguard collective honor, require ideological progress, actively respond to the company's call, and conscientiously implement company documents and meeting spirit. Work actively and hard, work hard, study relevant experimental knowledge seriously, and constantly enrich and improve yourself.

Looking back on the work of the past year, 20xx has been a busy and fulfilling year. The knowledge learned in school textbooks is all theoretical knowledge, and now I have accumulated bit by bit in my work. Practical experience is the treasure that I can enjoy endlessly in my life. During this year, there were difficulties but also gains. The result of serious work was that personal responsibilities were completed and one's own abilities were strengthened. A brief summary of this year's work is as follows:

1. Politics and Thought

I have a strong sense of ownership. I start with doing my job and daily work, and start with what I do. Starting from now, start from the small things around me and persevere, do my best in my job, and work tirelessly to achieve results. I must constantly improve my job skills, strive to be proficient in my job knowledge, and be the backbone and backbone of my job. An expert, a down-to-earth person who does his job well.

2. Work Attitude

No matter in work or life, I have always believed that hard work leads to harvest, so I have been working hard, studying hard, and working hard. If you love your job, you can treat every job correctly and seriously, be dedicated to work, attend work on time, use working time effectively, and stick to your position. The construction period is tight, the number of personnel is small, and the tasks are numerous. Being able to follow up on the job, ensure the completion of inspection tasks on time, and ensure the smooth flow of project inspections shows that our test personnel have a strong sense of responsibility and promotes our test personnel's continuous work, hard-working spirit.

3. Job Responsibilities

Conscientiously implement national policies related to standardization, quality management system, product quality supervision and inspection, and research and development; and ensure the implementation of the engineering products that this position is responsible for supervising and testing. Relevant standards, test methods and relevant regulations ensure that every inspection done is legally based. Do a good job in order acceptance, project inspection, information, feedback, etc., and keep a tracking ledger for future reference. Since there are many test and inspection items and the project inspection time is different, the work must be done in advance to avoid the technical personnel of the construction unit not understanding the engineering inspection requirements and technical indicators, which will delay the construction period and affect the progress. Our laboratory personnel adhere to the four basic principles, implement the quality policy, implement the quality objectives, abide by the rules and regulations, and serve the construction site wholeheartedly.

IV. Specific work

The work I am engaged in is mainly on some engineering and civil construction materials (cement, sand, gravel, steel, bricks, etc.) and finished products (steel bar weldments, Concrete test blocks, etc.) are tested and inspected; participate in the test of concrete mix proportions; supervise and control the mixing of concrete in the mixing station; control the on-site concrete and backfill soil, etc.

When I first started working, the first thing I came into contact with was the inspection of backfill soil. Although backfill soil is simple and boring, most people think that it is just a little bit of soil and there is nothing good to do. But I have been doing it for a while. , in fact, it is not that simple: starting from the material requirements of the soil, soil compaction is determined, and its control indicators; which parts need to be backfilled with soil, which parts need to be backfilled with sand and gravel or 3:7 lime soil must be controlled by technical indicators; Selection of backfilling equipment; are the conditions before backfilling met? Whether the strength of the underground concrete foundation meets the specified requirements, soil material selection, compaction requirements, whether the thickness of the virtual paving and the compaction coefficient have been determined. If the backfilling and compaction does not meet the requirements, then it is necessary Causing landslides, sinking, and even greater harm. Therefore, before I gradually came into contact with other materials and tested them, I had already established in my mind that nothing is easy and there is no room for ambiguity.

I have been exposed to more project inspections in the laboratory one after another, clarified the work procedures, and formed a relatively clear working idea in the specific work, so that I can carry out the work smoothly and complete my job skillfully and satisfactorily. .

Control of a pair of raw materials: For each batch of raw materials entering the site, the manufacturer's quality assurance certificate and inspection certificate should be issued, and each batch of raw materials should be inspected according to the specified quantity. ① For cement, when using bulk cement silos, it is strictly prohibited to mix cement from different manufacturers, varieties, and brands. When using bagged cement, protective and moisture-proof measures should be taken to prevent the cement from getting damp and clumping. When using cement that has been stored for more than three months, you should contact the laboratory in advance to conduct a second review of the actual cement number. ② The sand and gravel shall not contain foreign matter, coal dust, etc. Especially don't mix white ash. When it is found that the raw materials do not match the samples or are abnormal, the laboratory should be contacted for timely disposal. In order not to affect the construction progress, all raw materials entering the factory must be commissioned for testing in a timely manner. The 3d strength and 28d strength are used for cement testing. Test reports for steel, sand, stone, etc. will be issued within 24 hours after the laboratory is commissioned. All materials that need to be inspected can only be used after passing the test report issued by the laboratory. The principle is to inspect first and then use, otherwise it will be regarded as unqualified product. Use in engineering is prohibited.

2. Control of backfill soil: Before the construction of backfill soil, the construction department should truthfully fill in the backfill soil entrustment form, and construct according to the requirements of the design drawings if required. If there are no requirements, it shall be implemented in accordance with national regulations. The soil material selected for backfill construction requires the best moisture content. The thickness of each layer of backfill soil shall be compacted layer by layer in accordance with the specifications, and no leakage shall be allowed, and shall be inspected and accepted layer by layer. Only after passing the test can the next step of backfilling be carried out, otherwise the construction unit will rework it.

Three ① concrete projects. Concrete with special requirements and large-volume concrete should be entrusted in advance, and the opening appraisal should be carried out after the can is opened. ② Every time the mixing station mixes concrete, the mix ratio should be strictly implemented, the slump and workability should be controlled, and mixing and production control records should be kept. If the water content changes significantly, the laboratory must be notified in time to make dynamic adjustments. When using fly ash, environmental pollution should be avoided or reduced. Concrete test blocks are left in the mixing station, and the laboratory will evaluate the concrete production of the mixing station based on the concrete grade, batch, and time produced by the mixing station to control the level of concrete production.

4. For welders who enter the construction site for civil engineering operations, their unit must submit a copy of the welder's technical grade certificate and a list to the laboratory before the start of the project. Before starting the project, welders must be assessed for trial welding. Only after the test qualification report is issued can the welder proceed with formal operations.

As soon as I started working, I quickly integrated into the work, constantly demanding myself and constantly urging myself to improve. As a young worker, I dare not neglect my work at all. I ask myself to write down the gains and losses in my work and the problems that arise every time to learn lessons. When I encounter difficult problems or difficulties at work, I ask Ask the general manager for advice, listen patiently to his opinions and suggestions, and improve the work. Because my department only works in a small circle most of the time, I can't just sit back and wait. I often have more contact with the site from time to time to understand the engineering procedures and steps so that I can better serve my work in the future.

5. Work Achievements

I learned a lot at work and exercised myself. After unremitting efforts, the work level has been further improved, and in ****, in addition, with the mutual cooperation and collaborative efforts with other colleagues in the laboratory, the ** project civil engineering laboratory where I am located Was awarded the first class collective merit award.

VI. Summary

Although I have achieved some small achievements during this year, I am still far behind the trust and expectations of the company and my superiors. . In the future work, I will work harder to continuously improve my professional and technical level and better complete the tasks assigned by the leadership. Broaden your thinking, deepen and refine your job, and strive to make greater contributions to the powerful iron army of **** company.

? Part 2: Summary of the personal work of the experimental personnel

One year passed quickly, and all the work was successfully completed with the care and help of the leaders of the project department.

At work, we can comprehensively and systematically understand past situations, clarify what should be done, be sure; what should be corrected and avoided, learn from successes, and learn from failures so that we can practice better in the next step. Testing is a very important job in construction projects. It is a witness to the quality of the project. During this year's test work, I have summarized the following aspects:

Work:

1. Love your job, abide by the management regulations of the project department, and obey the leadership work arrangements.

2. Study professional skills diligently, have a correct work attitude, be serious and responsible, and take the trouble to ask leaders for advice, learn from colleagues, explore and practice on your own, and become familiar with experiments in a short period of time when you don’t understand something. work, and be proficient in various test methods and procedures.

3. Understand the technical performance of the materials used in the project, and conduct quality index test and appraisal of the project materials in strict accordance with the operating procedures under the guidance of the supervision engineer.

4. On-site personnel must pay attention to the on-site construction ratio and mineral material grading, control the cement dosage and moisture content, and conduct testing and data collection according to regulations.

5. Go deep into the construction site, supervise and inspect the quality of the project, correct problems found in a timely manner and report to the superior.

6. Fill in various test materials carefully and submit the test data to the construction site in a timely manner.

7. Collect and organize the original data of various experiments, and establish data files in layers.

8. Be proficient in the operating procedures of various instruments and equipment and the maintenance of instruments.

Attitude and ability:

At work, you must love your own job, be able to treat every job correctly and seriously, be dedicated to work, serve everyone enthusiastically, and strictly abide by Labor discipline, ensure timely attendance, use working time effectively, supervise the position, work overtime when necessary to complete the work, and work overtime on time to ensure that the work can be completed on time. I have a strong sense of ownership and always pay attention to the development of the company. I personally think about the interests of the company and the project department. I am determined that the company will continue to develop and grow. I am full of enthusiasm and expectations for the future of the company. Persevere in overcoming your own shortcomings and make up for your shortcomings.

I start from doing my job and daily work well, starting from me, starting from now, starting from the small things around me and persevering, doing my best in my job, and working tirelessly to achieve results. I want to Continuously improve your job skills, strive to master your job knowledge, be the backbone and expert of your job, and do your job well in a down-to-earth manner.

In terms of work quality performance:

Make a personal work plan before starting the work, complete the work in a prioritized and timely manner, achieve the expected results, and ensure quality and quantity. Completed the work with high efficiency. At the same time, I learned a lot of knowledge at work and exercised myself. Through unremitting efforts, the work level has made great progress, created a new situation in the work, and made great contributions to the company and the project department. due contribution.

Summarizing one year’s experimental work, although I have made some progress, there are still deficiencies in some aspects. For example, there are not many creative work ideas, and individual work is not perfect enough. It needs to be improved in future work.

? The third article: Summary of the personal work of the experimental personnel

In the blink of an eye, 20xx has passed. Looking back on the past, the internship started on March 7, 20xx until January 20xx. In the first half of the year, under the precise deployment of the laboratory and the Asset Management Office, under the full guidance of the Department of Mechanical and Electrical Engineering, and under the careful teaching of Teacher Guan, I experienced ups and downs and lost every bit of it. , and gained more or less. Here is an overview of the work I have completed in the past few months from the following aspects:

1. Accepting the evaluation work is the most important task in the first half of this year.

Cooperate with each teaching and research office to compile and submit various laboratory evaluation support materials. According to the plan and deployment of the College Assets Office, organize and return experimental instruments and equipment, improve and standardize the name of the laboratory, make name signs and post them in place, uniformly disassemble and assemble laboratory room number plates and post them in place, and improve the introduction and regulations of laboratory functions system, indoor slogans and put them on the wall.

Maintenance of relevant experimental boxes in EDA, ARM, and DSP comprehensive laboratories; cooperate with the after-sales staff of Jiangsu Startup Computer Co., Ltd. to debug computer composition principle experimental boxes, and replace fuse tubes for all analog oscilloscopes in high-frequency electronic circuits and electronic electrical laboratories ; Maintain the network of the GIS Laboratory, Computer Principles and Applications Laboratory, etc. After that, we will carry out daily management and maintenance of various laboratories, distribute experimental consumables, update inventory and replenish purchases, etc. to ensure the normal and orderly progress of experimental teaching.

2. Cooperate with various teaching and research departments to successfully complete the graduation defense work of the 20xx undergraduate graduates.

At the request of the graduate instructors of the Mechanical, Electronics and Communications Teaching and Research Section, the laboratory laboratory technician, as the defense secretary, assisted each teaching and research section to complete the recording of the graduation defense of the 20xx undergraduate graduates.

3. Preparatory work for the renovation, expansion and relocation of the new laboratory.

According to the careful arrangements of the dean of the school department, all offices, engineering departments, and teaching and research offices were mobilized to pack office items, computer equipment, and archived materials, and move them to the new office on the third floor before the start of school. After packing, count the number of file cabinets, desks and chairs and report them to the Assets Office for arrangements related to the moving work. As soon as the summer vacation comes, all the teachers have left school. In July, the renovation work of the experimental building on the second floor of the teaching building is also in full swing. In mid-August, the renovation of the classroom structure, merging two rooms into one, painting the walls, laying wooden floors and other work are coming to an end. The teachers in the laboratory of the department have given up their rest and have already arrived at work. Under the arrangement of teachers from the College Assets Office, we completed laboratory relocation, adjustment, expansion and other related work. Organize, clean, re-wire the relocated laboratory, and return experimental equipment and instruments to their respective locations. After the completion, the office furniture of each office, engineering department, and teaching and research office was moved to the third floor of the teaching building and adjusted back to its original position.

4. Installation and debugging of computer room laboratory systems, instrument maintenance in professional laboratories, etc.

The electromechanical laboratory contains three professional computer rooms, and students mostly use USB flash drives. The computer room system is easily infected with viruses. In addition, some teachers and students use improper methods, which damages the computer system, causing the system to frequently crash. Or a blue screen, please ask Teacher Wu Haiming from the Computer Training Center to give us guidance. There are many experimental equipment in mechanical and communication electronics major laboratories, especially experimental boxes and electronic instruments that are easily damaged. Clean up all damaged experimental equipment, contact the manufacturer for unified repair, and ask the manufacturer to provide relevant training for teaching teachers. In order to improve the normal utilization rate of equipment and ensure the normal and orderly conduct of experimental teaching.

5. The equipment configuration of each laboratory, cleanliness, and system posting on the wall will welcome the start of the school year with a new look.

According to the plan of the laboratory expansion plan, the old laboratory that needs to be relocated will be relocated as a whole, its configuration will be further adjusted and improved, and maintenance and overhaul work will be carried out. For newly built laboratories, the remaining equipment of the current laboratories will be integrated and the additional experimental equipment purchased will be put into use to optimize the allocation of experimental resources. We also conducted a comprehensive cleaning of all laboratories on the second floor of the teaching, and wiped all instruments and equipment clean and placed them neatly. And do a good job in the laboratory door number, laboratory introduction, rules and regulations on the wall, unify the standards, etc., to welcome the new students with a new look.

6. After the semester started, an inventory of laboratory assets was conducted, including consumables, experimental instruments and equipment, and other assets.

In order to further reduce the inventory of consumables in each laboratory, it is necessary to consolidate some consumables in all laboratories and uniformly clean up and inventory the current inventory of consumables in each laboratory to facilitate accounting and make the monthly use of consumables The situation is more detailed. Cooperate with the Assets Department to count assets, check the accounts of experimental equipment, and count all laboratories after rectification to facilitate replenishment and purchase, so as to save consumables and use them efficiently.

7. Teach relevant course design courses.

In accordance with the "Regulations on Application for Part-time Courses for Non-Teaching Staff of the College" issued by the Academic Affairs Office, 80 hours of course design courses are taught part-time. The two courses of EDA technology course design and digital electronic technology course design will be taught from the tenth week of this semester, totaling 96 hours, for 108 students in 3 classes. Strict teaching in accordance with the experimental outline, innovative work, bold practice, and achieved good results, and responded well among students.

8. Carry out self-examination work on the thirteenth week of experimental teaching.

In accordance with the relevant requirements of the "Notice on Carrying out Self-examination of Experimental Teaching in the Thirteenth Week" issued by the Academic Affairs Office, the director of our department is responsible for organizing and the laboratory managers are responsible for execution. In the thirteenth week, The classrooms of all teachers in the department who are teaching experimental teaching were inspected as required. The inspection results shall be reported truthfully to the Secretariat and Academic Affairs Office.

9. Teach the optimization of the laboratory environment on the second floor and the gradual improvement of the configuration.

According to the opinions and suggestions at the laboratory exchange meeting held by the Assets Department, the laboratory personnel on the second floor were taught to work together to dismantle the wooden doors with security doors installed on the first to sixth floors. Fan switches in each laboratory were replaced. Install multimedia teaching equipment in the electromechanical and electronic communications professional laboratories on the fifth floor.

10. Complete all invigilation tasks carefully.

December is a busy month. In addition to preparing lessons, the most important task is to invigilate exams. In addition to the large-scale Hubei Provincial Accounting Qualification Examination, the Hubei Provincial Adult Self-Study Examination, and the National College English CET-4 and CET-6 exams, the most important ones are the final exams of the entire college. I have nearly 20 of them. Since I live on campus, almost all of them are arranged in the evening, and other things change hands all the time, so the total number is about 30. In order to ensure the smooth completion of the invigilation work, the first thing I do every day is to check today’s invigilation tasks and set up my mobile phone Reminder, to achieve zero accidents.

Looking back, under the leadership of Teacher Guan, I have gone through this process and completed the role change from a student to a faculty member. All tasks were completed successfully and received unanimous approval from the teacher. After deep reflection, I found that I also had some shortcomings in my work process. For example, if you are impatient, you want to do something as soon as you think of something, and you are eager for success, but getting half the result with half the effort is more haste than speed; some things are not fully considered, and you will miss everything, so you need to be cautious in the future; you are young and energetic, and are easily impulsive. It is inevitable that you will make mistakes occasionally, and you will continue to practice in the future. At the same time, you need to communicate more with teachers, seek guidance, and improve yourself. Especially in terms of professional knowledge, personal abilities must continue to improve and continue to learn, so as to lay a solid foundation for longer-term development in the future.

Looking to the future, there is a long way to go. As a young faculty member, there is still a lot to learn. However, I am confident that through my unremitting efforts and study, I can improve my professional knowledge and work level as soon as possible. Provide suggestions for laboratory management and construction, and complete their own work well, thereby truly becoming a qualified or even excellent faculty member. ;