Installation method of original wood board on wall surface

The original wood board is a common wall material, and its natural texture and texture add a warm and natural atmosphere to the space. The following is the installation method of the original board:

1. Measuring size: firstly, measure the wall surface to ensure that the length and width of the plate meet the size requirements. At the same time, a certain space should be left to ensure that there is enough space between plates to facilitate natural expansion and contraction.

2. Preparation: Next, clean the wall, cut off the old wall paint and fill the gap. In addition, the use of leveling mortar on the wall to ensure the flat surface can also make the wall more solid.

3. Determine the installation method: There are two ways to install the original wooden board: one is to directly nail the wooden board to the wall, and the other is to install the wooden board on the wooden shelf, and then fix the wooden shelf on the wall. When choosing the installation method, we need to consider the thickness of the plate and the condition of the wall.

4. Pre-installed wooden shelves: If wooden shelves are installed, they need to be assembled and fixed on the wall first. It is necessary to ensure that the wooden shelf is installed straight, and at the same time, it should be calibrated with a level to ensure the stability and uniformity of installation.

5. Install the board: Then, put the board on the wooden shelf or nail it directly to the wall. Please note that the cardboard needs to leave enough space for natural expansion and contraction. Tap the board gently where the nails are ready until the board is installed.

6. Beautify the board: After installation, you can beautify the board surface with paint or coating. Before painting, the surface of the plate needs to be fully polished and trimmed to ensure that the surface of the plate is flat and smooth.

In short, the installation of the original board requires careful measurement of the wall size, preparation, selection of appropriate installation methods and plates, and then beautification of the board surface. This can ensure the beauty and stability of the original wooden wall.