What are the safety rules for working at height?

Safety Manual for Climbing Operations 1: Things that all operators should abide by 1. Wear work clothes, safety shoes, hard hats correctly, and the chin strap of the hard hat must be worn correctly. 2. Smoking must be done Designated places. 3. Tools and materials cannot be stacked near escape passages, firefighting equipment, and fire doors. 4. High-altitude work areas must be marked with warning tapes, and personnel unrelated to the work should not enter the work site.

Two: Working at heights 1. Safety belts must be worn when working in places where there is no safety guardrail and is more than 2m high. 2. Don’t throw things up and down from high altitudes. 3. In order to prevent tool parts from falling, place the tool parts in something like a pocket, and then hang the bag up and down with a rope. 4. Do not leave the workplace when there are things placed at high altitudes. 5. Scaffolding, lift trucks After it has been raised, it cannot be moved when there are people on it. 6. Scaffolding must be operated in a fixed place. When it does not need to be moved, it needs to be tied with ropes or braked. 7. When working in the field of high-altitude operations, be sure to hang the curtains used in high-altitude operations and set up obstacles to prevent others from passing through, and be sure to assign safety supervisors. 8. When climbing up or down a straight ladder or a herringbone ladder, Someone needs to hold the ladder. 9. When working on straight ladders and herringbone ladders, the body should not exceed the scope of the ladder.

Three: Hoisting operations 1: Overloading is strictly prohibited. 2. Before starting the operation, the crane The main part, hoisting tools must be inspected. 3: During hoisting operations, ensure that the passages within the boom range and places within the radius are tidied up. 4: It is strictly forbidden to stand below during hoisting operations. Four: Electrical work 1: Before working on electrical equipment, the power-off status must be determined, and live work is strictly prohibited. 2: Warning slogans must be installed on the front end of the equipment control to prevent others from closing the knife. 3: Before transmitting power, it must be confirmed that there is no one else on the line. The above is an explanation of "safety rules for working at heights". For more information, please log in to Zhongda Consulting.

For more information about engineering/service/purchasing tender document writing and production to improve the bid winning rate, you can click on the official website customer service at the bottom for free consultation: /#/?source=bdzd