What are the steps of wall decal and the points for attention when pasting?

Many people often stick some flowers on the wall for the beauty of their homes when decorating, but we don't know what kind of flowers we should choose, how to apply them and what we should pay attention to when applying them on the wall, so let's introduce them next.

Step 1, wall decals 1, wall decals, wooden exterior panels and wooden dados.

Structure of wooden facade and wooden dado. Bury the anticorrosive wooden brick into the wall, paste the wooden keel frame on the wooden brick, and then nail or paste the panel on the wooden keel frame. The cross section of wooden keel is 20~40? mm×40~50？ Mm, the space of wooden keel is 400~600? Hmm. 2, wall decal wood floor, wooden dado edge construction technology:

Wall treatment → elastic thread → making wooden skeleton → fixing wooden skeleton → installing wooden veneer → installing convergent line.

3. Key points of wall decal construction

(1) Wall decals must be horizontal. If the horizontal error of the wall is within 10mm, gypsum method can be used; If the error is greater than 10 mm, wood blocks can be filled between the wall and the keel.

(2) According to the height of the cover and the size of the room, wooden poles are made of bones, whole blocks or fragments. The bottom plate is installed at the bottom of the wooden skirt of the wall, and the bottom plate is fixed on the wallboard and the wallboard. The height of skirting board is 150mm. The wood thread is fixed in the coating.

(3) Determine the size of the wooden keel according to the panel thickness. The horizontal keel is usually about 400 mm, and the vertical keel is 600 mm. When the thickness of the panel is 1 mm or more, the horizontal spacing of the keel can be appropriately increased.

(4) When nailing, the upper part of the lining must be horizontal, and the size of the wooden beads must be the same.

(5) After installation, the wood clapboard shall be treated immediately, and the oil stain shall be cleaned again to prevent other types of work from polluting the board.

Second, the precautions for wall decals The wall is wet and should be dry or moisture-proof after construction. First, you can make a moistureproof layer on the wall. Secondly, you can leave a ventilation hole on the wall and under the wall. Third, you can pass through the wooden bricks on the wall, so that the panel and wooden keel are separated from the wall at a certain distance to avoid dampness. The influence of the group. The yin and yang angles of the two walls should be added with wooden keels. If varnish is used, panels with the same trees, colors and patterns should be selected.

These are the steps and precautions for wall decals.

Tubatu Online provides you with "each decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8 to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~