Can two remote control rooms be merged? Do the two control rooms need to be on duty after the merger?

Requirements for setting up control room:

(1) When there is only an automatic fire alarm system and no fire linkage control function, a fire control duty room can be set up.

(2) Buildings (groups) equipped with automatic fire alarm system and fire-fighting equipment requiring linkage control shall be equipped with fire control room. Fire-fighting duty room: The fire-fighting duty room should be located near the main entrance and exit on the first floor, and can be merged with the departments that are on duty frequently. Fire control room: 1. The door of the fire control room should be opened in the evacuation direction, and the entrance of the control room should be clearly marked. 2. The fire control room should be equipped with standby lighting, and the minimum illumination of its working face should not be lower than that of normal lighting. 3. The fire control room should take technical measures to prevent flooding. 4. The door leading to the fire control room of the building should adopt Class B fire doors. 5. The fire-fighting electrical equipment in the fire control room shall be equipped with an automatic switch device at the last distribution box of its distribution line. 6. The fire control room should not be located at exits with strong electromagnetic interference and other exits that may affect the normal work of fire fighting equipment. 7. The fire control room should be located on the first floor or underground floor of the building near the external wall, and a safety exit directly leading to the outdoor should be set. The fire control room attached to the building shall be separated from other parts by a fire partition wall with a fire resistance limit of not less than 2.00h, and the floor is1.50h.8.. The fire resistance rating of the independently built fire control room shall not be lower than Grade II. The fire resistance rating of the computer room should not be lower than that of the main building, and the fire control room should be Grade I. 9. The fire control equipment set in the fire control room should include fire alarm controller, fire linkage controller, graphic display device of the fire control room, special telephone switchboard for fire control, fire emergency broadcast control device, fire emergency lighting and evacuation indication system control device, fire power monitor and other devices or combinations with corresponding functions. 10. When there are two or more fire control rooms, the main fire control room and sub-fire control room shall be determined. The fire fighting equipment in the main fire control room shall control the fire fighting equipment used in the system and display its status information; The fire-fighting equipment in the main fire control room should be able to display the status information of the fire-fighting equipment in each fire control room and control the fire-fighting equipment in each fire control room and the fire-fighting systems and equipment controlled by them; Fire fighting equipment between each fire control room can transmit and display status information, but they should not control each other.