Workshop work plan

The days pass by without a sound in the blink of an eye. We will usher in a new round of efforts. It’s time to make a work plan for the next stage of our work. When it comes to writing work plans, I believe Many people are clueless and in a state of inner collapse! Below are 3 workshop work plans that I have collected for you. You are welcome to learn from them and refer to them. I hope they will be helpful to you. Workshop Work Plan Part 1

In 20xx, workshop safety and environmental protection work closely centered on the main theme of factory production development, in line with the requirements of continuous standardization and deepening, further embodying "people-oriented, safety first" and "intrinsic safety" ", advance prevention" concept, seize the key points and weak links, adopt source control and whole-process control measures, base on prevention, and strengthen supervision. In combination with the relevant national laws and regulations on safety and environmental protection, the following arrangements are made for the safety work in 20xx:

1. Use various forms and channels to strengthen the publicity and promotion of national laws, regulations, and regulations on production safety Study, strengthen the publicity and study of various safety production rules and regulations of the company and factory, improve employees' safety awareness and quality, and lay a good foundation for safe production throughout the year.

2. Focus on strengthening safety education for transferees and new employees entering the factory.

3. Earnestly implement the "Anti-Three Violations", "Safety Activity Month" and other activities carried out by the factory, and ensure that there are measures, implementation and records in place.

4. Make safety arrangements and implementation during holidays in accordance with the requirements of the company and factory. The class conducts safety study once a week.

5. Conduct a joint safety inspection at the end of each month to rectify the identified safety hazards, identify the responsible person, and set a time limit for rectification.

6. According to the safety goals of the factory, the annual workplace fatalities, serious injuries and multiple poisoning accidents in the workshop are set as "zero"; major equipment and operating accidents are "zero"; major fires and traffic accidents are "zero" "Zero"; major environmental pollution accidents "Zero"; and broken down layer by layer, and finally implemented to the team and every employee.

7. Complete the safety standardization work for the production and storage of hazardous chemicals in accordance with the relevant requirements of the country, Yunnan Province, companies and factories.

9. Strictly carry out "three-level" safety education and job transfer safety education, so that they can understand the risk factors existing on site and be familiar with the safe operating procedures of the job; they must be reminded and explained the safety precautions for work in the pre-shift meeting; Strictly inspect and supervise their work behaviors; carefully carry out weekly team safety activities based on the actual situation of the position, and continuously improve the safety awareness of all employees.

10. Go all out to fight the tough battle in the new year. Strengthen on-site safety work and inspect the safe use of on-site electricity and electrical appliances to ensure safety. Adhere to the principle of "safety, quality, environmental protection, and progress", strengthen the safety and environmental awareness of maintenance personnel, especially outsourcing personnel, and strengthen on-site supervision and inspection. Strengthen the management of key installations and key parts of production safety. Carry out focused management on annual overhaul and monthly and scheduled maintenance projects, prepare maintenance plans, and only carry out construction after approval. Be well prepared, well organized, take effective measures, and assign responsibilities to everyone.

11. Educate all workers in the workshop to do traffic safety and fire-fighting work. Strengthen fire inspections; strengthen traffic safety awareness.

12. Strengthen the management of hot work and implement a fire permit system for hot work in the workshop area.

13. Strengthen the safety management of hazardous chemicals.

14. Do a good job in safety and environmental protection. In accordance with the requirements of the Ministry of Safety and Environment, practical measures will be taken to implement safe and standardized production work.

15. Strengthen the rectification of safety hazards. Earnestly rectify safety hazards discovered during inspections as required, keep records, and formulate rectification plans for safety hazards that cannot be rectified.

16. Strengthen safety assessment work. Conduct assessments strictly in accordance with the factory department, workshop and other systems to improve the safety responsibility awareness of each team.

Workshop Work Plan 2

In the first half of 20xx, with the support of the company’s leaders, the machine assembly workshop focused on production, overcame many difficulties such as heavy production tasks, tight time, and insufficient personnel, and continuously improved workshop management. level and grass-roots on-site construction level. With the joint efforts of all workers in the workshop, half a year of production safety work was successfully completed. The half-year work report of the machine assembly workshop is now as follows:

1. Production work

In accordance with the production plan formulated by the production safety department, our workshop actively deploys and coordinates with multiple parties to implement key tasks. Successfully completed the half-year production task. According to the order requirements, we scientifically schedule production, make reasonable pre-investments, properly solve various problems and contradictions in production, complete the goal of producing 420 motors per month, and strive for the plan of 450 units. We will vigorously promote product quality improvement and quality creation plans, and continuously strengthen quality. Monitor and eliminate various quality hazards in a timely manner to ensure that each product is of high quality and each product is high-quality; secondly, we actively carry out labor competitions. At present, through the unremitting efforts of the company, market expansion is in a favorable situation. The workload is heavy, the production tasks are full, and the pressure to ensure delivery and main business production is relatively high. This is a rare good situation for the company and a valuable opportunity for us to accelerate development. If we cannot perform according to the contract and meet Party A's requirements, we will miss good development opportunities. In order to ensure that all work is carried out efficiently, all production and operation tasks are successfully completed, and the goal of "more than half of the time and more than half of the tasks completed" is achieved, the machine assembly workshop trade union actively responds to the spirit of the company's documents and formulates a labor competition implementation plan and assessment rules, based on the system. to implement, implement all relevant work, strictly implement production plans, strictly organize production operations, strictly enforce labor discipline, improve production efficiency, ensure the implementation of the monthly production task of 420 motors, and achieve the goal of 450 units. The third is to implement equipment repair and maintenance work.

Check equipment on time every month, keep equipment-related accounts, and repair two overhead cranes in a timely manner to ensure smooth production.

2. Safety work

(1) Safety training for new factory employees

In order to complete production tasks on time and meet the needs of production tasks, our workshop spent the first half of the year Two new labor contractors who have joined the factory are now studying in the drilling and clamping class in the workshop. Since the new employees entered the factory, our workshop has actively cooperated with the company's production safety department to carry out safety education at the factory, workshop and team levels, respectively, on the six major prohibitions, Relevant training was conducted on various hazards, occupational disease prevention and control, basic skills, HSE work instructions for fitters, and fitter operating procedures, so that new employees have a basic understanding of PetroChina's HSE-related requirements and a comprehensive and detailed understanding of the jobs they are engaged in. It laid a solid foundation for its future safety production work and also solidified the workshop HSE management work.

(2) Conduct in-depth identification and evaluation of hazardous factors and environmental factors

In early May, in accordance with the requirements of the equipment manufacturing branch documents, our company actively arranged to carry out in-depth assessment of hazardous factors and environmental factors Identify, summarize, and evaluate, use quantitative evaluation methods to carry out this work more comprehensively, more carefully, and more scientifically, assign points and evaluate each hazard factor, and express the nature and state of each hazard factor more intuitively. In May A summary report was conducted on the 13th. The successful re-identification of hazard factors has also provided a basis for the HSE management of our workshop.

(3) Organize and organize the workshop ledger

Organize the basic management of the workshop to pave the way and lay the foundation for the HSE work throughout the year, mainly for slings Organize and organize various basic management items such as leakage protectors, hand-held power tools, personnel rosters, etc. to ensure that the accounts and items are consistent.

(4) Carry out various safety inspections on schedule

At the beginning of each month, the workshop organizes relevant personnel to conduct inspections on the leakage protectors, slings, hand-held electric tools, and hand-held pneumatic tools in the workshop. A comprehensive inspection was carried out, and fire-fighting equipment, facilities and special equipment were inspected according to the plan, the overhead crane was repaired and maintained in a timely manner, expired safety valves and pressure gauges were sent for inspection, and on-site construction inspections of grassroots equipment and facilities were carried out on time at the end of the month. Inspections, monthly HSE comprehensive inspections, etc.

(5) Organize and carry out training work

According to the training plan, workshop employees were organized to conduct 5 trainings, which deepened employees’ understanding of the operation of equipment in their positions and improved employees’ ability to avoid risks. ability.

3. Quality work

Improve technicians’ awareness of responsibility and give full play to their initiative. In terms of quality supervision, complete each process with high quality, from product result control to process control. change. First of all, we strictly control the quality of each process and resolutely prevent unqualified products from flowing into the next process to make the entire production process a virtuous cycle. Secondly, strengthen the inspection of on-site process execution. The processing of motor bases, end covers, shafts, etc. shall be inspected as required, and problems arising during processing shall be solved in a timely manner to ensure that employees can perform processing in strict accordance with process requirements. Third, improve employees’ quality awareness. The workshop actively cooperates with the workshop's technical quality management personnel to promote quality knowledge to employees, which greatly improves product quality.

IV. Energy Saving and Consumption Reduction

We actively responded to the company’s call and carried out cost reduction activities. Considering all aspects, a cost reduction plan was formulated to achieve the goals of management efficiency creation and management efficiency enhancement.

1. Save electricity. During the workshop's leisure time at noon and after work is completed, all lighting equipment in the workshop is turned off. Each lamp is 150W, with a total of 30 lamps in the workshop. There are 29 electric fans, each with 750W. The daily power saving time is 1.5 hours, 1-6 In April, our workshop saved approximately 6979.5 kilowatts of electricity based on 122 working days. Calculated at 0.8 yuan per kilowatt hour, equivalent to RMB 5,582.

2. Recover oil leakage. Due to the design problems of the workshop equipment itself, some machine tools have obvious oil dripping, leaking, and oil splashing phenomena. Our workshop has designed an oil catcher. On the one hand, it can reduce the pollution of the oil to the earth, and on the other hand, it can also collect the dripping oil. The old oil is reused. It is initially estimated that the two horizontal milling machines in the workshop drip, leak, and splash about 2.5KG of old oil into the oil pan every day. The CNC vertical lathe CK5112/A and the CNC vertical lathe CK5112B/3 are protected every day. The oil leakage from the plate gap is about 0.5KG. The total oil intake is about 3KG per day. From January to June, our workshop saved about 396KG of fuel in 122 working days, which is calculated at 17 yuan per kilogram, equivalent to RMB 6,732.

3. Recycle aluminum scraps. The workshop classifies and collects waste scraps generated during the production process, and pays particular attention to the collection of aluminum scraps. Pure aluminum scraps are directly bagged, and aluminum-iron mixed scraps are first separated from iron scraps and then bagged to improve the quality of recycled aluminum. improve the quality of chips and reduce the loss of aluminum chips. Collecting more than 3 tons per month costs at least 16,000 yuan per ton. After excluding losses, the monthly saving is at least about 40,000 yuan, which can save about 240,000 yuan in half a year. Including the part of separating iron and aluminum, the total saving is nearly 300,000 yuan.

4. Reuse milling cutters. Our workshop proposes to re-sharpen the old three-sided blade milling cutter. The monthly usage is about 15 discs, which can be sharpened 2 to 3 times. The new milling edge is about 260 yuan per disc, and the sharpening processing fee is 40-60 per time. Yuan per plate. The monthly saving is about 3,000 yuan, and the saving is about 18,000 yuan in half a year. I haven’t purchased a new milling cutter since the beginning of the year.

5. Party branch work

1. Actively carry out labor competition

1. Under the correct leadership of the company leaders, the workshop will unswervingly focus on " In line with the policy of "safety first, prevention first", since April, labor competitions have been vigorously carried out in the workshop to maximize the enthusiasm of all employees, encourage employees to work hard, compete for contributions, wisdom, advancement, and honor. It has made great contributions to the comprehensive completion of various production plans issued by the company this year.

2. The labor competition carried out in our workshop focuses on the policy of "safety first, prevention first", strict labor discipline, implement a system of heavy rewards and heavy penalties for safe production, fully mobilize the enthusiasm of employees, and formulate safety production responsibilities People make all work proceed in an orderly and stable manner.

3. The labor competition in our workshop is carried out in a fair competition between teams and groups. Each team actively responded to the company's labor competition policy. The team leader took the lead. Under the difficult circumstances of heavy workload, few personnel, heavy tasks, high requirements, cumbersome procedures, etc., all members of the production team gave full play to their intelligence and talents, day and night, to ensure that ensure the successful completion of production tasks. Competition between teams promotes the labor competition mechanism of the entire workshop and improves the quality of the entire workshop in all aspects.

2. Actively carry out party branch work

At the beginning of the year, we actively carry out arrangements for the party branch work throughout the year, and do a good job in the public commitment of party members, the work of striving for excellence, and the collection of reasonable suggestions from employees. , especially the inspection of the party building work of Bohai Company pointed out the direction of improvement for the party branch construction work in our workshop and put forward many good suggestions. The party branch of the machine assembly workshop is also steadily implementing and carrying out solid work, and strives to improve the quality of the employee team. , do a good job in mobilization, education and guidance. Workshop Work Plan Part 3

In order to implement the policy of "safety first, prevention first, comprehensive management", we strengthen the management of safety production targets. Based on the actual situation of the factory, a production safety work plan for 20xx has been specially formulated, and production safety work has been included in the important agenda. The alarm bell is ringing and the work is unremitting.

1. Full-year goals

Achieve no deaths, no serious injuries, no major production equipment accidents, no major accident hazards throughout the year, and the incidence rate of work-related injuries is lower than the factory-specified indicators. Comprehensive The dust concentration qualification rate is above 80 (as shown in the table below).

2. Guiding ideology

It should be guided by the company's management responsibility for the safety production goals in 20xx, the factory safety work management system as the standard, and the general safety work policy of "Safety First" ", prevention first." is the principle, based on the safety management of workshops and teams, focusing on preventing major accidents in key units and key positions, and implementing various regulations with the breakthrough of correcting illegal command, illegal operations and employee labor protection wear. system, create a new situation in safety work, and achieve a fundamental improvement in safety production.

3. Firmly establish the ideological consciousness of "safety first"

All units and departments must attach great importance to safety production work, regard safety production work as an important task, and conscientiously implement the " The policy of "safety first, prevention first" will further enhance the awareness of production safety, take practical measures and use real efforts to truly implement the policy of "safety first", and first solve the leadership awareness by further improving the safety production responsibility system. issues, truly put safety production work on the important agenda and put it in the "first" position. Only by attaching importance to safety ideologically can the sense of responsibility be in place, can management and grasp be in place, and can safety responsibilities be implemented in depth and accidents rectified. To avoid hidden dangers, we strictly implement the principles of "whoever is in charge is responsible" and "managing production must manage safety" to ensure safe production.

IV. Carry out in-depth special rectification work on production safety

Based on the current situation of the factory, determine the key units and key locations for production safety in 20xx, improve the emergency plans for handling accidents, and strengthen Monitor and rectify major major hidden dangers, carefully carry out factory-level monthly safety inspections and special safety inspections, conduct weekly safety inspections in the workshop, and insist on three safety inspections in the class, and require production department, workshop leaders and managers to strengthen daily safety inspections. In safety inspections, for the discovered accident hazards, rectification must be organized in a timely manner in accordance with the principle of "three fixes and four no-turns". If rectification cannot be made temporarily, safety precautions must be taken, especially for gas stoves, boilers, sulfuric acid tanks, liquid tanks, etc. Safety precautions for important parts such as ammonia tanks, special rectification work, and management of hazardous chemicals such as flammable, explosive, toxic, and hazardous chemicals must be strictly enforced in accordance with the "Work Safety Law" and the "Regulations on the Safety Management of Hazardous Chemicals" Special rectification is carried out to strengthen safety management on the job site, promptly investigate and deal with violations of regulations, illegal operations and other phenomena, so as to minimize the occurrence of various accidents and ensure the normal operation of factory production.

5. Continue to strengthen safety education, training and publicity for employees

The factory educates employees on production safety through classes, pre- and post-work meetings, posters, briefings, etc. , improve employees' production safety knowledge and operating skills, regularly or irregularly organize employees to learn relevant production safety regulations, laws and production safety knowledge, provide three-level safety education for new employees and those who change jobs, and improve employees' awareness of production safety and In order to improve self-protection ability and prevent accidents, special operations personnel must undergo professional training, pass examinations and be issued certificates, so that 100% of them can work with certificates. Conscientiously implement the "Safety Production Law" and conscientiously study the "Typical Accident Cases" and the "Titanium Dioxide Factory Safety Production Emergency Meeting Minutes" (UFO Titanium Sheng [20xx] No. 9) issued by the company. Continuously standardize and strengthen safety production publicity work, carry out in-depth "Ankang Cup" competition activities, make full use of the National Safety Production Month activities in June, and paste safety production slogans, safety topic bulletins, distribute safety brochures, and establish models, etc. Carry out various forms of safety production education and increase publicity efforts to achieve the purpose of promoting the year with each month. Improve employees' awareness of complying with laws and regulations, and enhance safety awareness and self-protection awareness; guide workshops and teams to establish safety culture concepts, strengthen management, and implement responsibilities; closely integrate safety production with ensuring factory stability, harmony, and development to achieve safety Production alarm bells are ringing.

Safety production work in 20xx will continue to adhere to the policy of "safety first, prevention first." In accordance with the principle of "who is in charge, who is responsible", responsibilities will be further distinguished from maintaining the overall development of the factory. Set out, maintain the hard-working, hard-working work style of Titanium White, strictly implement the company's safety production work arrangements, control indicators, take active actions, pay close attention to safety production work, and make new achievements for the economic development of the factory to become bigger and stronger. contribute.