Summary of the work of the special action on production safety

The so-called "safety production" refers to the adoption of corresponding accident prevention and control measures in order to avoid accidents that cause personal injury and property loss in production and business activities. Below I will bring you special safety production Summary of action work, I hope you like it!

Summary of special action on production safety 1

Through 6 months of special inspections and classified rectification, we have implemented production safety Special rectification work plan. On the basis of the first two stages and in accordance with the requirements of the third stage work plan for special rectification of production safety, all the work of the third stage has been completed. In the third phase of work, the company and its branches carefully organized and arranged carefully, went deep into the site to conduct safety hazard inspections and re-examinations, and classified and rectified the identified problems. The current work of the third phase of the special rectification of production safety is summarized as follows:

1. Careful organization and careful arrangements

According to the requirements of the company's "Notice on Carrying out Special Rectification of Production Safety in the Whole Company" , first formulated the "Work Plan for the Third Phase of Special Rectification of Production Safety" to clarify the responsibilities and tasks of each functional department and branch company in the special rectification, and make arrangements and deployments. The company held a special rectification work meeting for the third phase and clearly stated the rectification requirements and objectives. The company's monthly and branch offices' regular safety production meetings every ten days are held as a reward meeting for special rectification work. All departments and branches must report the special rectification situation. In the third phase of the special rectification work on production safety, all departments, offices and branches have made careful arrangements and conducted in-depth on-site inspections, achieving organization, arrangements, progress and implementation.

2. Special investigation and classification rectification

According to the third phase of the work plan, we mainly conduct inspections on the management and use of civil explosives, mine ventilation, tunnel surface ventilation, electrical equipment, lifting and transportation, Mining engineering, mining room recycling, underground drainage and tailings pond management have undergone classified special inspections and rectifications.

In the classified special inspections, the production department is responsible for special inspections of mine ventilation, excavation, and lifting. It conducted more than 70 underground inspections and found 57 problems, including 15 ventilation, mine operation, etc. 9 locations, 10 excavation projects, etc., and 24 rectification plans were formulated. In the third phase, the Safety Department conducted 68 well inspections and found more than 100 problems, and supervised the branch's special rectifications. The Technology Department and the Safety Department conducted more than 30 inspections of the tailings ponds of Branches 1 to 4 and found 24 problems. They formulated rectification plans for major problems and supervised the implementation of the rectifications. The Security Department, Assets Department, Supply Department and other departments conducted inspections of branches and supervisory workplaces in accordance with the requirements of the plan. Among them, 29 civil explosive items and 16 equipment management were found. All problems found were carefully rectified. . Potential accident hazards will be eliminated through fines, time-limited rectification, and partial suspension of production. In particular, production shutdowns for larger accident hazards will be implemented. The technical department will formulate a rectification plan and the branch will implement the rectification. After review by the safety management departments of the company and branches, all rectifications have been implemented and completed.

3. Eliminate hidden dangers and ensure safety

Through the classified special inspections from May to October, 256 safety hazards of various types were found, including 64 mine ventilation and civil safety hazards. There are 29 explosion management locations, 57 mining locations, 36 electrical equipment locations, 20 lifting and transportation locations, 24 tailings ponds, and 26 other locations. General problems were rectified on-site, and rectification plans were formulated for major safety hazards discovered. A total of 24 rectification plans were formulated, and all rectifications have been completed. After special rectification, we have eliminated many safety hazards, created a safe and healthy working environment for safe production, and ensured the safety of workers.

The third phase of special rectification work has been completed, but as production continues to deepen, production operations and the environment continue to change, new unsafe factors will emerge, and the safety problems we face are still serious. . Therefore, we must always put safety work first, never relax for a moment, and must persist in the special rectification work of safety production to the end.

Summary of the work of the special action on production safety 2

In order to implement the spirit of Document No. 19, promote the construction of a safe production system for food and agricultural products, carry out in-depth food safety projects, strengthen food hygiene supervision, and ensure that our township Regarding food safety, our township has done the following work:

1. Guiding ideology and work goals

Adhering to the working principle of “treating both the symptoms and root causes, focusing on the root cause, combining prevention and attack, and comprehensive management”, With the people's health and life safety above all else as the starting point, we will increase the supervision and management of food production and operation activities, investigate and deal with illegal and criminal activities in the production and sale of counterfeit and shoddy food, and prevent, mitigate and eliminate food safety hazards and risks to the greatest extent , accelerate the construction of the food safety traceability system, comprehensively improve the food safety supervision level of our township, and ensure the food safety of our township.

2. Establish a special leadership group for food safety rectification in Shanguang Township

Establish a leadership group headed by Comrade Li Shili, the deputy township chief, and all members of the Safety and Economic Management Office as members The team provides unified leadership and coordination for food safety management in the township. The coordination leading group implements irregular spot checks and regular meetings, listens to work reports from villages, enterprises and institutions, and inspects and supervises the implementation of work.

3. Contents of rectification:

(1) The management of food production and business entities has been strengthened. Those engaged in food production and business operations must obtain administrative licenses in accordance with the law, and food business entities must comprehensively Implement relevant laws. Expand the scope of supervision, carry out strict rectification of indoor and outdoor sanitation of food production and processing outlets immediately if they fail to meet the strict requirements, strictly inspect the health certificates of personnel engaged in the food industry and the inspection of purchase accounts, and conduct strict inspections of units or units without accounts and health certificates. The individual immediately made rectifications within a time limit, and jointly conducted special inspections with the industrial and commercial department and other relevant departments on the food production system sites, schools, kindergartens, enterprises, institutions and other places in the township. If there were problems, rectifications were made within a time limit and continued to increase the number of inspections in Chenggezhuang and Dachengzi. The supervision of the three trade markets on Qiangzi Road and Qiangzi Road will be strengthened to prevent counterfeit and shoddy food from flowing into our hometown.

(2) Increase efforts to rectify food circulation links. Implement the food access project in the circulation field and establish a long-term supervision mechanism. In accordance with the policy of "classified supervision, combining prevention and crackdown, treating both symptoms and root causes, and comprehensive management" and the principle of "highlighting key points, innovating models, moving barriers forward, and supervising in accordance with the law", our township strictly enforces food market access and urges food business entities to establish and improve Food access system: implement the incoming inspection and acceptance system, purchase and sale ledger system, sales food quality commitment system, factory-site linking, site-linking and other agreement access systems, as well as the delisting and recall system of unqualified goods, to effectively improve the quality of food on the market.

(3) Do a good job in supervision and management of food consumption.

1. Pay close attention to the special improvement of rural food hygiene. Focusing on rural mobile food stalls, small workshops, small shops, small restaurants and school canteens, our township rectification team carried out centralized supervision and law enforcement operations to crack down on various food violations and clean up catering units that did not meet hygienic conditions. Strengthen the investigation and punishment of illegal activities such as operating food and catering businesses without health licenses.

2. Carry out special rectification of the catering industry. Our township organized the departments of industry and commerce, health and other departments to carry out special rectification of health and safety in the catering industry throughout the township, vigorously promote the quantitative and hierarchical management of the catering industry, and focus on solving the disorderly arrangement and occupation of food stalls along the street, as well as the lack of health licenses and unlicensed food stalls. Illegal operation of health certificates.

(4) Strictly crack down on illegal activities such as illegal slaughtering, excessive slaughtering, and the production and sale of water-injected meat and diseased meat. Our township closely cooperates with the health, industry and commerce, animal husbandry and other departments, and fully mobilizes social forces to severely crack down on illegal activities Illegal activities such as excessive slaughtering and production and sale of water-injected meat and diseased meat. Illegal and criminal gangs that engage in illegal activities such as private slaughtering and indiscriminate slaughtering and the production and sale of water-injected meat and diseased meat must be thoroughly investigated and severely punished in accordance with the law.

4. Signing letters of responsibility with various enterprises, institutions, and administrative villages

Shanguang Township currently has 174 individual industrial and commercial households and 12 tourism and catering services. It is mainly distributed in the township and is relatively scattered. According to the actual situation, the township government signed a food safety responsibility letter with 22 administrative villages, enterprises and institutions in March, clarifying the goals and responsibilities of food safety. The letter of responsibility requires all enterprises and institutions to implement the responsibility system.

5. Improve and improve rural food safety supervision responsibilities

Network and information network to achieve timely transmission of rural food safety information and maximum sharing of resources. Further expand the rural full-time and part-time food safety supervision team, implement regional supervision measures, and form a rural food safety supervision system that extends horizontally to the edge and vertically to the end, with clear responsibilities, coordination and cooperation, and orderly operation.

6. Establish an emergency response mechanism for food safety incidents

The entire township has launched an emergency response mechanism for sudden food safety inspection incidents. If you encounter food poisoning and infectious diseases, you should go to the emergency department immediately after discovery. The township health center provides treatment or the health department and public security department urgently go to the scene of the incident for first aid, investigate and report to the township food safety coordination leading group, and report it in a timely manner. If a major incident occurs, the township leading group reports to the county-level competent department for action. Networking has been carried out at the village, township and county levels, and implementation has been implemented at all levels.

7. Problems in food safety management and future work priorities

Since our township is located in a remote mountainous area and borders Xinglong County, the population mobility is large, which has caused a great impact on the food safety of catering companies. Hygienic inspection of operators is difficult. Therefore, in the future, our township’s food safety district will focus on the hygienic inspection of migrant food operators in catering enterprises.

Due to the good work and intensive inspection, no food safety accidents occurred in our township during the renovation period, ensuring the safety of lives and property of the residents of our township.

Summary of the work of the special action on production safety 3

20__ is the "Special Rectification Year for Production Safety" determined by the provincial government. The company conscientiously implements the various requirements and regulations of the special rectification. Actively carry out special rectification work on production safety. After a year of special rectification of production safety, the company's production safety situation has fundamentally improved and achieved certain results. It has eliminated unsafe factors in production safety, promoted the stable development of the company's production safety work, and created a safer and more secure environment for employees. Healthy work environment. This year’s special rectification work on production safety is summarized as follows:

1. Company Profile

Our company is an enterprise that collects, selects and reduces iron powder, and currently has 2,000 employees. Yu Ming, with total assets of 440 million yuan, has jurisdiction over three mining areas, with ore reserves of 48.76 million tons, and has 6 branches and a joint venture. Now it has formed "iron ore - concentrate powder - ultra-pure ore powder - sponge iron - primary powder - secondary powder" and "concentrate powder - ultra-pure ore powder - ultra-pure ultra-fine ore powder - rubber and plastic homogeneous powder - There are two major industrial chains: rubber and plastic heterogeneous powder-magnetic materials-rubber and plastic material products. The main products include: iron concentrate powder, reduced iron powder, rubber and plastic magnetic powder and other three series with more than ten varieties.

In 20__, the company produced 299,000 tons of concentrate powder, paid taxes of 116.72 million yuan, and paid fees of 53.42 million yuan. The total of the two items was 170.14 million yuan, making it a major profit and tax owner in the county. In 20__, the company determined the overall work idea based on the actual situation of the enterprise: "Simulate the market to learn from Handan Iron and Steel, adapt to the market to survive, ensure safety and increase efficiency, and improve quality to occupy the market." Since February, the mines and tailings ponds of our company's No. 1, No. 2 and No. 4 branches have successively obtained safety production licenses, passed the acceptance of resumption of work and production by the municipal and county safety supervision departments, and have resumed production one after another. From January to November, our company produced 470,000 tons of raw ore and 180,000 tons of concentrate powder. Affected by the international financial crisis, the sales price of concentrated ore powder has dropped significantly, and the ore powder market has been in a downturn. The company is facing unprecedented difficulties, but it has not compromised on safety investment. From January to November, it invested 7.15 million in safety expenses. Yuan, laying a solid foundation for safety production work.

2. Basic situation of production safety

The company has improved the production safety management organizations at all levels and established a production safety committee. The general manager serves as the director and other leaders serve as deputy directors. Relevant departments and offices and various Branch managers are members with clear responsibilities and detailed division of labor. Each branch company has established a corresponding safety production organization and management agency, with a safety department under it, and a safety group under the safety department, forming a safety production supervision and management network from top to bottom.

The company has always adhered to the safety production policy of "safety first, prevention first, comprehensive management". In __ years, we aimed to build safety standardization, used safety education and training as a means, and carried out special rectification work As a measure, we use the investigation of hidden dangers as a breakthrough to comprehensively strengthen the basic management of production safety, strengthen the implementation of responsibilities, pay close attention to accountability, and form a production safety management system with full participation, all-round management, and full-process prevention.

3. Special Rectification Work on Production Safety

Since this year, our company has conscientiously implemented the “Year of Special Rectification on Production Safety” determined by the provincial government in 20__ and actively carried out special rectification actions on production safety. . Seriously following the requirements and deployment of special rectification work on production safety by governments at all levels of city and county, we actively carried out special rectification work on production safety throughout the company and achieved the expected results of the special rectification work, promoting the smooth progress of the company's safe production. The specific work situation is as follows:

1. Deployment, mobilization and publicity stage

(1) Establish an organization to clarify its responsibilities

According to the requirements of city and county special rectification work , the company set up a special production safety rectification leading group headed by General Manager Li Guangjian, and formulated a work safety production special rectification work plan. The "Notice on Carrying out Special Rectification of Production Safety in the Company" was issued with the document No. 1 of __. The plan is thorough and the responsibilities are clear. The scope, inspection content, rectification methods and steps of the special rectification are formulated. Each unit and department is responsible for the special rectification of production safety within the scope of their responsibilities according to their respective division of labor. Members of the leadership group are required to raise their awareness, recognize the situation, and conscientiously carry out the special rectification of production safety within their own units.

(2) Propaganda and mobilization to raise awareness

In order to do a good job in publicity and mobilization for the company's special rectification of production safety, the company held a mobilization meeting for leaders above the workshop director level on February 28. It also provides guidance and supervision on the progress of propaganda and mobilization work of each unit from time to time. All units actively responded to the spirit of the company's special rectification meeting on production safety, held timely mobilization meetings to convey the information step by step, and made careful arrangements and arrangements. Make full use of pre- and post-shift meetings, blackboards, slogans, newspapers and other forms to carry out extensive publicity and mobilization. All employees were made aware of the importance and necessity of this special rectification work, and a vertical to bottom and horizontal to the edge pattern was formed, so that all cadres and workers actively participated in this special rectification activity.

(3) Arrangement and Deployment

According to the company's "Special Rectification of Production Safety" plan, the method of special rectification work is clearly stipulated as follows: in accordance with "self-examination and self-correction of branch offices, comprehensive improvement of the head office" In the "tracking and supervision" method, each branch company first conducts self-inspections in teams and workshops, and the safety department conducts comprehensive inspections. The relevant functional departments of the company will conduct comprehensive tracking and supervision of the mines and tailings ponds of each branch company in accordance with their respective divisions of labor. Clear and specific arrangements and requirements have been made for the work steps and key points of special rectification.

Steps of special rectification work:

The first phase is the overall deployment and publicity launch, which lasts for one month (February)

The second phase is self-examination and self-examination Rectification and investigation will last for two months (March-April)

The third stage of classified rectification will last six months (May-October)

The fourth stage "Looking back" to re-examine and summarize, the time is two months (November-December).

Focus of the special rectification work:

Based on the safety production characteristics of non-coal mines and the actual safety production situation of the company, we focused on the following aspects to investigate and rectify:

(1) Engineering quality, ventilation, on-site dangers, and blasting operations in underground mining operations.

(2) Anti-fall facilities, safety protection devices, one slope and three gears, wire ropes, equipment testing, daily maintenance and inspection records during lifting and transportation.

(3) In local ventilation, the position of local fans, air duct leakage, irregular hanging, and circulating air flow.

(4) The stope management is not standardized, the operating procedures are not standard, and the roof inspection is not in place.

(5) Safety protection measures, equipment maintenance and operation records of key equipment are not complete.

(6) Collection, use, registration, temporary storage, and withdrawal in civil explosion management.

(7) Underground waterproofing, drainage and fire prevention.

(8) The height, steps, reverse slope and safety protection measures of the mine ballast removal site.

(9) Tailings reservoir dam body, slope ratio, testing facilities, flood control facilities, tailings discharge, telephone, lighting facilities, and storage of flood control materials.

2. Self-examination, self-rectification and investigation stage

(1) In-depth on-site investigation

The company’s chairman Shen Guixi and deputy general manager Liu Wuwen personally led Safety, production, and technical personnel went deep into the underground and above-ground, site selection workshops, tailings ponds and other operating sites of branches 1 to 4 to conduct inspections. They conducted careful and comprehensive inspections of hidden dangers wherever they went, and formulated solutions and made clear rectifications. The person responsible shall issue a notice for rectification within a time limit. The leaders of the branch attach great importance to the special rectification of production safety, strictly follow the formulated work plan, and carefully carry out safety inspections. According to the inspection content requirements, safety inspections are carried out item by item, and every work surface and every work link are not missed. The company's departments and offices conduct inspections and supervise the branch's special work on production safety within their respective responsibilities, ensuring that each production unit is inspected and rectified in place, leaving no dead ends or safety hazards.

(2) Careful rectification and elimination of hidden dangers

After two months of self-inspection and rectification, the company leaders and relevant department personnel went to the site for 41 inspections, and thoroughly investigated and rectified various types of There are 116 safety hazards. For general accident hazards, the person in charge of the production unit is ordered on-site to formulate measures to implement rectification on the spot. For hidden hazards that are difficult to rectify at the moment, rectification instructions are issued within a time limit, the "three determinations" are implemented, and the rectification situation is reviewed; for those that may cause accidents In order to detect the hidden dangers, the inspectors issued three partial production suspension notices on the spot and made rectifications within a time limit. All hidden dangers detected have been rectified, and the rectification rate of safety hazards has reached 100%, which has effectively promoted the company's special safety rectification work.

3. Special inspection and classified rectification stage

According to the company’s special rectification work plan for production safety, in the third stage of classified rectification work, the company’s departments and branches must use various Carry out classified rectification in a down-to-earth manner, and carry out inspection and rectification in a down-to-earth manner. It mainly conducts classified and special inspections and rectifications on civil explosion management and use, mine ventilation, tunneling surface ventilation management, electrical equipment, lifting and transportation, mining, recycling, fire prevention and drainage and tailings ponds, etc., and reviews the hidden dangers that have been rectified and the existing safety Remediate hidden dangers.

From May to October, each branch will carry out classified review and investigation on the rectification of problems and safety hazards discovered in the previous stage of self-examination and self-reform, to prevent the hidden dangers from rebounding, and to correct the rectification problems that are not in place or thorough. Conduct accountability and remediation. Relevant departments and offices of the company carried out classified and special rectification of production units in accordance with their respective scope of responsibilities, and promptly provided supervision and guidance for rectification when problems were discovered.

In the classified rectification stage, the company organizes relevant departments and offices to conduct classified safety inspections and rectifications. *** 256 safety hazards of various types were found, including 64 for mine ventilation, 29 for civil explosion management, 57 for mining, 36 for electrical equipment, 20 for lifting and transportation, 24 for tailings ponds, and 26 for others. General problems were rectified on site, and rectification plans were formulated for major safety hazards discovered, with deadlines for rectification. ***24 rectification plans were formulated, and after review, all have been implemented and rectifications have been completed.

In October, the company re-examined the rectification of classified special safety inspections of production units, and supervised and rectified the issues raised by the joint inspections of provinces, cities and counties one by one to ensure that the achievements of the classified special rectification were consolidated and ensured The company's production safety.

4. "Look back" and re-inspection

During the "Look back" and re-inspection of the fourth stage of special rectification of production safety carried out from November to December, we are consolidating the results of the first three stages On the basis of rectification, we continued to implement various management systems and responsibility systems, strengthened the investigation and management of hidden dangers, implemented rectification measures for safety hazards, and investigated and rectified 57 locations. Through the fourth stage of re-inspection, the achievements of this year's special rectification work on production safety were consolidated and laid a solid foundation for the company's future production safety work.

4. Increase the accountability for hidden dangers beforehand

In the special rectification work, partial production suspension and rectification were carried out on individual working surfaces where the wind speed was not high and safety protection measures were not in place; Provide education and training to those who violate rules and regulations; carry out prior liability investigation for hidden dangers in branches that do not perform well in rectification work.

Those responsible for inadequate special rectification were given suspensions, written inspections, and one week of training and study, and were allowed to resume work only after passing the examination; those responsible for the "three violations" were fined, with a total safety fine of 26,000 yuan this year. . Through accountability, we have effectively promoted the in-depth development of special rectification of production safety; adhering to the principle of "no production if unsafe, no production if standards are not met" has achieved good results in the special rectification work.

Safety is no small matter. We must attach great importance to it, raise awareness, strengthen management, be strict and meticulous, conscientiously implement various safety management systems, implement safety production responsibility systems at all levels, and conscientiously do a good job in safety production Work. Although we have made some achievements through a year of special rectification of production safety, there is still a big gap between the requirements of production safety. In the future production safety, we must conscientiously implement various safety policies, laws, regulations, procedures, and standards, and always adhere to the requirements of production safety. Put safety work at the top of the company's work, and strive to do a good job, be practical, and achieve results in the company's safety production work.

Summary of the work of the special action on production safety 4

Our office is based on the document "Emergency Notice of the Production Safety Committee of Gaoping District of __ City on Carrying out the Special Rectification Action on Production Safety in the Hazardous Chemicals Industry" According to the requirements, we must conscientiously carry out special rectification work on the safe production of hazardous chemicals. The work is summarized as follows:

1. Basic situation

The Qingxi Sub-district Office is located in Gaoping City, covering an area of It covers an area of ??28 square kilometers and has jurisdiction over 4 administrative villages, 8 neighborhood committees, 108 village residents' groups, and 60,376 people. There are 3 fireworks and firecrackers in the jurisdiction, all located in Beidouping Village, 2 gas stations, and 1 gas station.

2. Main tasks

(1) Attach great importance and make careful arrangements.

In order to ensure the orderly implementation of the special rectification work on hazardous chemicals, the "Notice of Qingxi Street Office, Gaoping District, __ City on Carrying out Special Rectification Actions for the Safety Production of Hazardous Chemicals" (HD According to the document No. 20__], a leading group was established with the secretary of the Party Working Committee as the team leader, the deputy director in charge of safety as the deputy team leader, and other team members and village (community) secretaries as members, and implemented the responsibilities . At the same time, a cadre and employee meeting attended by all office cadres and village (community) cadres was organized to arrange and deploy this work.

(2) Strengthen publicity and create an atmosphere.

Our office has adopted multiple channels and forms to publicize the "Safety Production Inspection". ***Hang 10 slogans and post 20 small slogans. At the same time, we use radio, LED, WeChat, QQ group and other media to carry out extensive publicity, which enhances the sense of safety responsibility of hazardous chemicals enterprise operating units and improves the safety awareness of surrounding residents. and awareness rate.

(3) Comprehensive investigation and elimination of hidden dangers.

The whole office has continued to carry out special rectification activities for the safe production of hazardous chemicals that combine unit self-inspections, industry mutual inspections, special inspections, and key spot inspections. The sub-district office has established a total of 2 inspection teams, led by leaders in charge, and relevant staff conducted safety inspections on gas stations, fireworks and firecrackers throughout the office. At present, the entire office has formed an inspection team to inspect 6 times, inspecting enterprises more than 20 times, and 21 people participated in the inspection. Any hidden dangers discovered were immediately rectified on site.

Summary of the work of the special action on production safety 5

In order to further implement the Nanchang City Safety Production Committee Office’s "On Earnestly Implementing the Spirit of the City’s Video Conference on Safety Production Work, we quickly carried out a large-scale inspection and rectification of production safety" "Emergency Notice of Work", the tourism group's safety production related work deployment, our group carried out safety production re-investigation and rectification actions. In this re-inspection and rectification work, our group was led by General Manager Luo Yong to lead the work of the Group's Safety Supervision Department The personnel and related staff of the leaders of the affiliated enterprises went deep into the grain warehouses of each property store to conduct hidden danger inspections, mainly to check whether the fire escapes were unobstructed, potential safety hazards in production in hot weather, as well as the electrical lines of old warehouses, property stores, and whether flammable and explosive materials were stored. We conducted another focused inspection on dangerous goods and other aspects. During this inspection, our group strictly followed the documents and the tourism group’s requirements for production safety to ensure zero accidents in safe production and lay a safe and stable environment for the company’s economic development.

On the morning of August 1, 20__, Nanlv Grain Management Company held a production safety and work deployment meeting. Members of the company team, main leaders of affiliated enterprises, and heads of functional departments attended the meeting.

The meeting conveyed the spirit of Li Hongjun, member of the Standing Committee of the Provincial Party Committee and Secretary of the Municipal Party Committee, "Speech at the City's Video Conference on Safety Production", Nanlv Group's "Notice on Carrying out the Investigation and Management of Hidden Safety Production Hazards in Hot and High Temperature Seasons of Nanlv Group" and the safety production work of the Grain Group In the spirit of the deployment meeting, we made arrangements for our company's safety production work.

In order to implement the spirit of the meeting, the company's general manager Luo Xiaojun, deputy secretary Wan Bing, deputy general manager Zhao Liming, deputy general manager Shu Huiwen led the relevant responsible personnel of the safety supervision department, marketing department, logistics department, noodle factory and so on Respectively on the morning of August 1, 20__, the morning of August 2, the afternoon and evening of August 2, the morning of August 9, the morning of August 10, the morning of August 11, the evening of August 13, 8 On the evening of March 17th and August 20th, we conducted inspections on the power supply equipment and grain storage safety conditions of the rental warehouses, stores, railway platforms, construction sites of the grain trading market, and the processing workshops, grain storage warehouses, and small packaging rice workshops of Jiangxiang Industrial Park. The drag-net investigation focused on fire protection facilities, fire escapes, electrical wiring, illegal charging of electric vehicles, billboards, slogans, warning signs and other areas that may have hidden dangers in view of the current unfavorable factors such as high temperatures, flood season, and extreme weather. Immediately arrange rectification of detected hidden dangers. During the inspection process, fire safety knowledge during the hot summer season was also taught to business households within the scope of the company. At the same time, all departments were required to effectively implement the current safety production and on-site management work, strengthen the investigation and management of safety hazards, and ensure that The operating company system is safe and stable.

Articles related to the work summary of the special action on production safety:

★ 5 selected articles on the summary of production safety activities in 2022

★ 10 articles on the summary of work safety on production in 2022

p>

★ Summary of production safety work (selected 5 articles)

★ 2022 safety production summary report (selected 10 articles)

★ Summary of the latest special production safety rectification work

★ Five summary reports on the implementation of special rectification work

★ Five summaries of special rectification actions for production safety

★ Selected sample summaries of production safety work

p>

★ 10 summary reports of the 2022 safety production inspection

★ 15 selected safety work summaries