What does it mean to meet a car?

Question 1: What does it mean for motor vehicles to meet? The word "passing by" means that on the same road, vehicles driving in opposite directions cross somewhere. This instantaneous action is called passing by.

According to different road conditions, when driving a vehicle on a road with a centerline, you should lean to the right side of the road centerline and keep a safe distance from oncoming vehicles. Do not cross the dotted line of the road center, and do not cross the road center line.

Vehicles are driving on the road without central guardrail. When encountering oncoming vehicles, they should appropriately slow down, choose a relatively wide and solid road section, and pass slowly on the right side of the road. Pay attention to keep a safe distance from other vehicles, pedestrians or non-motor vehicles, and don't make an emergency turn when the other vehicle approaches.

Question 2: What does "meeting the car" mean? The bus at night should be "funny three first"

When the vehicle is driving on the road without the central guardrail, it should slow down the speed appropriately when encountering the oncoming vehicle in front, and choose a relatively wide and solid road section to cross slowly on the right side of the road.

If there is an obstacle on the right side of the road in front of you, the prospective driver should decide whether to accelerate or decelerate or even stop to let the other car go first after crossing the obstacle according to the distance, speed and road conditions of his car from the obstacle, so as to stagger the time and avoid meeting at the obstacle. If you are not sure, you should slow down, slow down to the vicinity of obstacles, and don't be busy overtaking, so that the opposite car can pass the obstacles and continue driving; If it is estimated that two cars will meet at obstacles, they should take the initiative to slow down, stop, adjust the position of the car or reverse to give way, and don't rush to block the driving route of the coming car; If there is a possibility of meeting when the road is narrow or there are obstacles on both sides of the road, the intersection section should be pre-selected according to the incoming speed and road conditions of the other party, and the speed should be controlled correctly to ensure that the two cars meet at the selected section.

When meeting cars, we must pay attention to maintaining enough safe lateral spacing and achieve "three first comity"-slow down first, make way first, stop first, and never grab the road, resulting in a stalemate. In general, the following rules must be observed: empty cars avoid heavy cars, bicycles avoid towed trucks, big cars avoid small cars, trucks avoid passenger cars, long-distance buses avoid other cars, ordinary cars avoid special cars performing tasks, and downhill cars avoid uphill cars.

When passing at night, you should change the high beam into the low beam according to the regulations, and slow down the speed at the intersection to prevent the pedestrians and cyclists on the right in front from colliding.

When passing by, pay special attention to pedestrians and non-motor vehicles on the road and see the pedestrian dynamics at the expected meeting place. When pedestrians are blocked by oncoming cars, they should be prevented from ignoring their own cars, so they should signal. In short, when there is a crosswalk, it is necessary to prevent all kinds of unexpected situations and be prepared to stop at any time.

Question 3: What does it mean to meet a train in the driving test? That is, trains and cars traveling in opposite directions cross at the same time.

Meet the car profile

Take a look at the model, speed and load of oncoming vehicles, the width and firmness of the road ahead, pedestrians and vehicles on the roadside, parking and obstacles on the roadside, etc.

Second, through observation and comparison, estimate the approximate position and road occupation of the two cars, and leave a suitable lateral safety interval;

Third, slow down, that is, slow down when the car meets the situation, and the conditions are not good when approaching the intersection. More importantly, it is necessary to control the speed, not blindly meet each other, and stop when necessary to achieve the goal of smooth meeting between the two cars.

Driving skill

1, pay attention to traffic command signals and traffic signs when passing;

2. If you encounter a car in the case of unclear sight, you should reduce the speed in advance and turn on the low beam;

3. Don't use emergency braking, slam on the accelerator and slam the steering wheel when passing;

4. Avoid encountering obstacles;

5. Avoid meeting in complex places such as narrow bridges, narrow roads, tunnels and sharp turns;

6. Avoid overtaking at night without turning off the high beam.

Make way for passing vehicles "Make way for passing vehicles" is a traffic ban sign, which means that when vehicles meet, the vehicle facing the sign must stop and let the other vehicle go first.

Question 4: What does it mean that the opposite motor vehicle crosses my motor vehicle somewhere? My motor vehicle meets this opposite motor vehicle.

Question 5: What do you mean by a three-time bus? Meeting a car means that there is a car coming from the opposite side when you are driving. "Meeting the car" is named "Meeting the car". Cars meet first, which means that when the road is narrow, cars that have the conditions to avoid should let the cars that have the conditions to avoid pass first.

Question 6: What does the driving test subject mean when it comes to a bus? A 20-minute meeting is to let the car coming from the opposite side pass, but don't wipe it. If you wipe, it is a collision. Turn off the high beam when you meet at night.

Meeting means that cars driving in opposite directions cross at the same time.

Question 7: What do you mean by passing by? It means that two cars are coming from opposite directions, and when they meet, they are called passing by.

Question 8: What do you mean by the train passing by? Is there a car passing by? Two cars came face to face (going their separate ways, of course, but coming face to face), and so did the train.

This power-

baike.baidu/...HgY4iG

Question 9: What is the meaning of "meeting" in motor vehicle theory examination or how to understand the word "meeting"? It refers to the intersection of opposite vehicles on the same road. This instantaneous action is called meeting.

According to different road conditions, when driving a vehicle on a road with a centerline, you should lean to the right side of the road centerline and keep a safe distance from oncoming vehicles. Do not cross the dotted line of the road center, and do not cross the road center line.

Vehicles are driving on the road without central guardrail. When encountering oncoming vehicles, they should appropriately slow down, choose a relatively wide and solid road section, and pass slowly on the right side of the road. Pay attention to keep a safe distance from other vehicles, pedestrians or non-motor vehicles, and don't make an emergency turn when the other vehicle approaches.

If there is an obstacle on the right side of the road in front of subject 3, it is necessary to decide whether to accelerate or decelerate or even stop after crossing the obstacle according to the distance, speed and road conditions of other vehicles from the obstacle, so as to stagger the time and avoid meeting each other at the obstacle.

If you are not sure, you should slow down, slow down to the vicinity of the obstacle, and don't be too busy overtaking, so that the opposite car can pass the obstacle and continue driving.

If it is estimated that two cars will meet at obstacles, they should take the initiative to slow down, stop, adjust the position of the car or reverse to make way, and don't rush to block the driving route of the coming car.

When vehicles meet on a narrow road or with obstacles on both sides of the road, cross sections should be pre-selected according to the incoming speed and road conditions of the other party, and the speed should be correctly controlled to ensure that the two vehicles meet at the selected sections.

When passing cars, we must pay attention to maintaining enough safe lateral spacing and achieve "three first comity"-slow down first, let go first, stop first, and never grab the road, which will lead to deadlock.

In general, the following rules must be observed: empty cars avoid heavy cars, bicycles avoid towed trucks, big cars avoid small cars, trucks avoid passenger cars, long-distance buses avoid other cars, ordinary cars avoid special cars performing tasks, and downhill cars avoid uphill cars.

If it is necessary to meet at night during the night road test, the high beam should be changed to the low beam according to the regulations, and the speed should be slowed down when meeting to prevent the pedestrians and cyclists on the right side in front from colliding.

Knowing the above points is equivalent to mastering the skills of safe driving, which is believed to be very beneficial to the future subject three exams and safe driving.

Question 10: What does it mean to meet the car first? To put it simply, if your side is the sign of the first bus, then you should go first when the other party comes. If something happens to the other party forcibly, it is the other party's full responsibility. If it's a passing car, you have to let the opposite car go first when it comes. If an arc accident occurs forcibly, the responsibility is entirely on you.