Joke Collection Website - Mood Talk - Talk about the troubles encountered during ceiling installation

Talk about the troubles encountered during ceiling installation

The bare top of the wall really looks a bit monotonous, so more and more people are making fuss on the top of the wall. Suspended ceiling is the most commonly used method. Why choose suspended ceiling? Because it has many advantages, such as thermal insulation, heat insulation, sound insulation, sound absorption, etc. And there are many styles of suspended ceilings now, which are truly practical and beautiful. But even such a good thing can cause trouble to people. The next thing I want to talk about is the troubles encountered in ceiling installation.

Trouble 1. Cracked gypsum board installation

When installing gypsum board, if there is no installation specification to tighten the screws from the middle to the four sides, but instead tighten the screws from multiple places on the four sides at the same time, this will The gypsum board will also produce stress, and if the stress is large enough, it will also cause cracking; in addition, if the screws that fix the gypsum board are too far apart or some screws are in the correct position but are not tightened, they will also cause cracking.

Trouble 2. There are traces of glue on the seams of the ceiling

If there are traces of glue on the seams of the ceiling, it will look particularly ugly. At this time, you need to consider what to do. If there is wallpaper on the wall of your home, use a sprayer to moisten it, and then wipe it off with a handkerchief after two minutes. Repeat several times until it is clean. Be sure not to use too much force, as it will easily damage the wall. Wipe off the surface or wallpaper color.

Trouble 3. Ceiling cracks due to improper moisture-proofing

If wooden keels are used and the moisture-proof treatment is not done well, the wood will be more susceptible to moisture and deformation, resulting in cracking of the suspended ceiling. In addition, gypsum board is also relatively easy to get damp. If you drill holes accidentally when installing screws, the board will be cracked. In this way, the gypsum board will be easily deformed, resulting in cracks on the surface of the suspended ceiling.

Trouble 4. Cracks caused by insufficient adhesion

The gypsum board should have appropriate seams. If the kraft paper and caulking putty used in construction do not have enough adhesion and strength, it will be extremely difficult. Cracks may occur. At this time, we need to pay attention to the adhesion during construction and make changes quickly if something is wrong.

Trouble 5. The ceiling sealing strips are not aligned

The sealing strips at the corners of the ceiling are not aligned. At this time, you should pay attention to the problem. If the four boards are aligned If the cross gap is not aligned, then the installation worker should be reminded to fix the board while putting it on. This way, at least the wrong position can be corrected in time. Of course, if the gap between the buckle and the wall is too large, , that must be caused by applying too much glass glue and not pressing it properly during installation.

Trouble 6. The joint putty cracks

If the interface between gypsum board, wall, and wooden plywood with different materials is not handled properly due to thermal shrinkage or dry shrinkage, it will easily lead to cracking of the joint putty. . For example, cracks may occur because the putty dries too quickly, the seams are too long, the putty solidifies too slowly, and the putty layer is too thick.