Peace elite, do you think it is necessary to adjust your sensitivity now?

Hello! Sensitivity should be adjusted according to individual needs.

Personal suggestions can be debugged in the training ground.

I personally took the gun I wanted to practice, added a magnifying glass (without wearing any other accessories) and started gun training. First try the basic strength mirror, 50 meters close, 30 bullets per shuttle, whether it can hold the center point above. Try to add your own custom double mirror again. Scan the center point from a distance. (personal ak is used twice and four times. See if there are any materials on the actual battlefield. M4 is 3 times or 6 times. Of course it's the best. )

To emphasize, the side mirror that comes out now is also a relatively rare thing. Strangely, I can't pick it up every time I want to, so the basic mirror red dot hologram is on me. If I am lucky, I can pick it up and throw it aside or pick it up when licking my bag, so I can throw it away. Because this side mirror is replaceable)

It is definitely necessary to adjust the sensitivity, because many people can't use the default sensitivity, and the gun can't be pressed. Next, I attach my sensitivity. A week later, I debugged myself in training camp and actual combat. I am a full-time gyro player, and my sensitivity may only be applicable to some gyro players. However, it doesn't matter, I will teach non-gyro players to adjust their sensitivity. First of all, we must understand the lens sensitivity and the firing lens sensitivity. What is lens sensitivity? Lens sensitivity is the sensitivity of the lens when the mirror is opened. For example, if we open the mirror and aim at people from left to right, this is the lens sensitivity (in this case, we don't fire). Let's talk about the sensitivity of the shooting lens first. The sensitivity of the emitting lens is our sensitivity in the emitting state. At this time, the lens sensitivity is not involved. To sum up, whether the gun can be held down is related to the sensitivity of the firing lens. We mainly adjust the sensitivity of the shooting lens, only when the lens is pointed at people. Trigger the firing lens sensitivity after firing, and the lens sensitivity will not participate. Well, knowing these two sensitivities, we can debug our own sensitivities. First, let's look at the lens sensitivity of the red dot holographic sight. I recommend 30 40, and we can start debugging ourselves from this value. Then there is the sensitivity of the firing lens of the red dot holographic sight. First of all, I took m4 16 and put on my usual accessories. I would say that my usual accessories are compensation, right angle, fast expansion and stock. Then I went to the shooting area, where I put the magnifying glass, removed the accessories and put on the red dots. Pull the shooting lens sensitivity of the red dot holographic sight to 10, and aim at the 25m target. And so on, until the gun can be held down, and then all the accessories are installed, so that the sensitivity of the red dot holographic sight is debugged, and then I give the sensitivity of the firing lens of the red dot holographic sight, which is commonly used by most non-gyro players, basically between 50 and 55. As for the double mirror, not many people use it, so I won't talk about it here. I'll give you one directly. The lens sensitivity is 28, and the shooting lens sensitivity is 43. If it can't be pressed, slightly improve the sensitivity of the transmitting lens. If you can't press it, slightly reduce the sensitivity of the shooting lens. Now let's talk about triple mirrors, triple mirrors and six mirrors. They are all the same. They all use the sensitivity of the triple mirror, and we only need to adjust the sensitivity of the triple mirror. Let's start adjusting the lens sensitivity of the triple mirror. I will directly give a value between 17 24 and start debugging myself from this value. Then increase the sensitivity of the shooting lens by three times. First, install a 6x mirror on m4, and adjust it to 3x. Still, only the fast expansion is installed, and the sensitivity is adjusted to 10. Press the gun on the 40m target, raise it by 10 until it can be held down, and then install all the accessories. After debugging 3 times and 6 times, I gave a value of 38 400 suitable for non-gyro players. Say it again four times. I'll give you a value of 4 times the lens sensitivity, between 10 15, and start debugging yourself from this value. Then the debugging method of 4 times shooting lens sensitivity is still the same as above, except that we have to switch to the 45-meter target for debugging. I also gave the sensitivity value of non-gyro players 4 times the lens, which is between 28 and 35. Finally, you can also use 4 times sensitivity when adjusting from 8 times to 4 times. For example, if we play a company, such as mini 14, we will adjust it to 3 times after 6 loads and 4 times after 8 loads. This is very easy to press the gun, and you can fire quickly and hold it down. It is recommended to use one bolt for pure 6 times and pure 8 times. Well, that's all I want to share. It doesn't matter if you don't understand friends. I will teach by video in the future. It's not easy to fight by hand. I hope everyone will support me a lot.

There are two kinds of people about whether it is necessary to adjust the sensitivity in Peace Elite. Some people play games occasionally for fun, while others are skilled in order to have more fun eating chickens in games. Then let's talk about the difference between these two kinds of people.

People who play games occasionally have fun.

In the game, these people account for the majority. These players are just having fun. It doesn't matter whether they eat chicken or not. They don't care what accessories they use, just take them. They only care about the number of bullets and other basic configurations. They are not in the mood to study the sensitivity of weapons. It's luck to play right or not. There is a saying to describe this kind of people, "I shot, and it depends on God's will whether I fight or not."

Technology stream player

This kind of person will study the sensitivity of weapons, what accessories to use, the location of listening and speaking, and so on. These people are generally children with internet addiction. In G port, P city, N port and military base, almost all of them have their stories. This kind of player can be said to be fearless, and the only fear is Voldemort!

What kind of person are you in front of the screen? The people who read this article should all be players who have not adjusted their sensitivity, right? !

After talking about these two types of people, let's talk about how to debug the sensitivity that suits you!

Sensitivity debugging method

First, let's find the weapon to debug in the training ground. Take M4 16 as an example.

1. After we found M4 16, we fitted him with an expansion magazine, and then fitted him with six-fold mirror adjustment and three-fold mirror adjustment (the most mainstream configuration at present). There is no need to install other accessories at this time. In the sensitivity setting, we found the sensitivity of 6 times the mirror, set it a little bit, then shoot at the target, slowly debug and find the sensitivity that suits us. After feeling almost the same, install all the configurations of M4 16 and try the fire again. Sensitivity at this time is basically the best for you.

Other weapons can also be debugged in this way, just install the most basic accessories.