Joke Collection Website - Mood Talk - The great gods will tell your little sister about the setting of sampling for steel bars in Guanglianda. If you don't understand, please don't talk nonsense.

The great gods will tell your little sister about the setting of sampling for steel bars in Guanglianda. If you don't understand, please don't talk nonsense.

1. Lapping needs to be set, and there are rules for quota calculation. Generally, there is an lap with a diameter of less than 12 meters and an lap with a diameter of 8 meters. 2. The low elevation of the first floor refers to the elevation of the indoor floor relative to ;

3. There is no need to set the roof, and the software defaults to the increase coefficient of the anchorage length of roof reinforcement. Generally, the column anchor plate is 1.5 times LaE and the column anchor beam is 1.7 times LaE;

4. Anchorage lap joint need not be set, just select the atlas specified in the construction information;

5. Use+sign to connect the different diameters of the long bars;

6. Generally, there is no need to set stiffeners on both sides of the door, and stiffeners are needed at the entrance of the shear wall. Just input the stiffener information marked on the drawing;

7. What you said is that the toilet should be made of 2mm high concrete flanging except for doors and windows, which can be expressed by ring beam, and all the information of ring beam reinforcement should be deleted;

8. You can add steel bars to the ring and lintel member information or manually calculate the input data with a single member;

9. Single component input;

1. Draw the upper and lower reinforcement bars in X and Y directions according to the drawings, and use 1/1 of the software default for stirrups;

11. Manually calculate the input in the single member of bay window reinforcement.