Problems related to safety in production

1 range

This standard specifies the responsibilities, management contents and requirements, responsibilities and assessment of fire safety management.

This standard is applicable to the company's safety production, public security and fire management.

2 normative reference documents

The clauses in the following documents become the clauses of this standard by reference. All subsequent revisions (excluding errata) or revisions of dated reference documents are not applicable to this standard. However, parties who have reached an agreement according to this standard are encouraged to study whether the latest versions of these documents can be used. For undated reference documents, the latest edition is applicable to this standard.

Law of People's Republic of China (PRC) on Work Safety

People's Republic of China (PRC) Fire Protection Law

People's Republic of China (PRC) fire protection regulations

Q/MN G 1 1003-2009 Safety Production Training and Education System

3 management responsibilities

3. 1 The Administration Department is the direct department of the company's fire safety management, and performs the following duties:

3. 1.65438+

3. 1.2 Equipped with safety fire fighting equipment, implemented regular maintenance measures, improved fire prevention conditions, carried out fire safety inspection, and eliminated potential safety hazards in time;

3. 1.3 Organize fire self-rescue, protect the scene fire, and assist in the fire cause investigation;

3. 1.4 Organize personnel to carry out fire safety education and fire prevention training;

3. 1.5 Organize fire self-rescue, protect the fire scene, and investigate the cause of the fire.

3.2 The company decomposes, implements and establishes the company's fire safety system and graded responsibility system, and implements the responsibilities horizontally to the edge and vertically to the people:

3.2. 1 Each department shall establish its own responsible person and formulate corresponding safety fire control system measures.

3.2.2 Each department promotes the key prevention parts and preventive countermeasures of its own department.

3.2.3 All departments shall regularly or irregularly conduct safety inspections and keep records.

3.2.4 The company should popularize fire safety knowledge, carry out training and demonstration education, and hold simulation demonstration if possible.

3.2.5 All employees of the Company shall abide by the Law of People's Republic of China (PRC) on Work Safety, the Law of People's Republic of China (PRC) on Fire Control and the Safety Code.

4 fire management

4. 1 The administrative department of the company shall formulate detailed fire prevention and extinguishing management system and detailed implementation rules.

4.2 Evacuation signs, emergency lighting devices and necessary fire-fighting facilities shall be set at the following locations in the company:

Each production workshop;

Raw materials and finished products warehouse.

4.3 The fire-fighting equipment and equipment used by the company must be products with national production license and product quality certificate, and the quality of electrical equipment used must meet the fire safety requirements. The installation of electrical equipment and the design and laying of electrical circuits must conform to the safety technical regulations and be overhauled regularly.

4.4 It is strictly forbidden to use naked flame in fire danger places without authorization. If you need to use open flame appliances, you should apply to the Ministry of Security in advance to explain the safety measures, and you can use them only after they are approved by the Ministry of Security.

4.5 Operators shall hold relevant certificates, and other electricians with fire hazards must operate according to relevant safety requirements.

4.9 It is forbidden to use homemade or purchased electric stoves for heating or cooking in offices and dormitories.

4. 10 Designates a non-smoking area, and employees are not allowed to smoke in the non-smoking area.

4. 1 1 The company shall rationally allocate fire fighting equipment according to the existing fire fighting situation and financial situation, and shall not move, damage or misappropriate it without authorization, and check and replace it regularly.

4. 12 employee bicycles, electric vehicles and company vehicles shall be stored in the designated area in an orderly manner, and articles shall not be piled up for a long time, and discarded articles shall be disposed of in time.

4. 13 the following personnel of the company shall receive fire safety training:

Responsible persons or persons in charge of fire safety at all levels;

Fire safety management personnel;

Installation, operation and maintenance personnel of fire fighting equipment;

Management personnel of inflammable and explosive goods warehouse.

5 Safety production management

5. 1 The work of all departments and workshops shall be carried out in strict accordance with the safety operation regulations.

5.3 After using the electrical equipment, clean the machine and cut off the power supply every time to ensure safety and reliability.

5.5 Only electricians or professionals can install wires and threaten electrical equipment.

6 Fire safety inspection implementation requirements

6. 1 Administration Department checks whether the fire control facilities are safe and effective.

6.2 The production department should check whether the fire escape is unblocked.

7 fire safety training management

The company has set up pre-job fire safety training, specifically referring to the safety production training and education system.

8 Firefighter management requirements

8. 1 Seriously study the Fire Protection Regulations of People's Republic of China (PRC), conduct regular fire protection training, and train other personnel.

8.2 Be familiar with the company, memorize the location of fire fighting equipment, be familiar with the performance of the equipment, and be familiar with the operation and usage.

8.3 Check the company's fire control work regularly, fill in the notice of hidden dangers, take measures within a time limit, check the implementation, and nip in the bud.

8.4 Report the fire immediately, organize and participate in the coordination of fire fighting work as soon as possible, and minimize the fire loss.

8.5 Organize investigation in time after the fire, and truthfully reflect the cause of the fire.

9 related records

Notice on rectification of safety production training and education system

1 range

This standard specifies the safety education system.

This standard is applicable to all departments of our company.

2 responsibility

2. 1 Administration Department is the competent department of safety education and training, and is fully responsible for the safety education and training of the company.

2.2 All departments and workshops actively cooperate with safety education.

3 General requirements of company safety education

3. 1 The Administration Department establishes a three-level safety education file. Conduct safety education for employees who are new to the company, change jobs, adopt new technologies, new processes, new equipment and new materials, and conduct safety education for special operations personnel.

The first-level safety education is provided by the company's administrative department to all new employees. The contents of education are: national laws, regulations, guidelines and policies on production safety, company-level safety rules and regulations, safety discipline and law-abiding education, company-level knowledge on identification and prevention of various hazards (points), and company-level fire-fighting facilities. The education rate reached 65,438+000%.

Workshop director is responsible for secondary safety education. Education content: workshop safety system and safe operation rules, precautions and operation essentials of accident safety, correct wearing and use of labor protection articles, notification and prevention of dangerous sources, emergency knowledge and escape knowledge, and the education rate reaches 100%.

The class (group) leader is responsible for three-level safety education. The contents of education include: on-site safety precautions, safety technical operation procedures, performance of mechanical equipment and tools used in this type of work, knowledge of safety management and proper use of personal protective equipment. The education rate reached 65,438+000%.

4. Safety education for special operations personnel

4. 1 Special operations refer to operations that are prone to casualties and have great harm to the safety of operators, others and surrounding facilities.

Our company's special operations include: electrician operations and motor vehicle driving.

Personnel engaged in special operations must obtain corresponding certificates before taking up their posts.

5 formal education

5. 1 Safety education and training must be regular and institutionalized. The main contents of regular education include:

Laws and regulations on labor protection and safety in production at higher levels and relevant documents and instructions;

Safety responsibilities of all departments, departments and employees;

Safety rules and regulations and labor discipline;

Accident cases and lessons, advanced experience and innovation of safety technology, etc.

5.2 The workshop shall hold a safety production meeting from time to time. The contents of the meeting are: safety production regulations and documents issued by higher authorities; Sort out, check and summarize the safety production situation in this period, analyze the cause of the accident at the same time, put forward the methods to eliminate hidden dangers, and make records of relevant meetings, the record form is uncertain.

5.3 For safety education and training, the Human Resources Department should make relevant training records, establish employee training accounts and keep them properly.

Related records

Three-level education and training card for employees

Responsibility book for production safety

Safety production inspection record