What are the characteristics of assembled floor?

With the continuous improvement of living standards, people now use assembled floors when decorating houses and paving floors, but we don't know what the characteristics are when assembling floors, and how to maintain them. Next, we will introduce the characteristics of assembled floors and how to maintain them. I hope you can refer to them when buying floors.

1. What are the characteristics of the assembled floor

1. First of all, for everyone, it has a long service life. Because polypropylene (PP) is used as raw material, its strength is very high, it has oxidation resistance, radiation, ultraviolet rays, etc., and it is resistant to pressure, high and low temperature and impact, and its service life is also long.

2. Next, the cushioning and high elastic performance, the product has a bow-shaped structure after the cross section, which greatly increases the impact resistance of the product, which can reduce the injury of athletes and increase the rebound line, and its resilience is as high as 96%.

3. What's more, polypropylene (PP) is an environment-friendly product that is non-toxic and harmless, and has reached the edible level.

4. However, the utilization rate of outdoor use is high, but the basic structure of the assembled floor is a bird's nest lattice basket structure, and there is a sink below it. When it rains or is washed with water, there will be no water accumulation, ensuring a high availability rate.

5. The assembled floor is beautiful and not dizzy, but it has no visual impact because of the different lattice structure, so it will not cause dizziness. If it is used in a large area, it doesn't matter. It looks like a carpet, which is practical and has a good landscape.

6. finally, the maintenance cost is low, and the site where the assembled floor is used only needs to be washed with water without other maintenance costs.

2. How to maintain the assembled floor

1. Let's talk about it for everyone first, but the dust and large grains of sand on the assembled floor will damage the surface of the bottled floor, which can lead to its surface discoloration. Therefore, it is necessary to clean the assembled floor regularly and clean the impurities on its surface at any time.

2. Next, it is said that local impregnation on the floor surface is more serious, but it can be cleaned with neutral reagent, but it can be wiped with rag. We must never clean it with substances with steel wires, but this will destroy the surface substances of the floor.

3. What's more, when some corrosive liquid or paint drops to the ground, it needs to be cleaned with alcohol immediately. In addition, when using solutions such as acid or acetone, it may cause large-scale infection and softening and discoloration. The neutral reagent can clean the oily impregnation.

4. finally, but for the daily cleaning of waxed floor, it can't be cleaned with too wet sanitary ware, which can prevent sewage from sticking to the surface of wax layer and causing the wax layer to fall off. Just use a dry mop to remove the dust on the toilet surface, and clean up the local pollution.

nowadays, people use assembled floors when decorating houses and paving floors. What is said in the above article is about the characteristics of assembled floors and how to maintain them. What is not clear in Xiaobian?