What symptoms will appear when the washing machine motor is broken?

The motor of washing machine is damaged and does not work, and most of them have peculiar smell, which may be because the motor does not turn, usually because the motor winding is burned or partially short-circuited, open-circuited, the bearing is locked with the motor shaft, and the rotor is bad. These failures will cause the motor of the washing machine not to turn. Put the multimeter in the resistance range and measure its resistance. The normal resistance value is generally between ten ohms and dozens of ohms. Abnormal resistance of rewinding. Pay attention to the wire diameter of enameled wire, and the number of turns should be the same as the original one. Extended content: the reason why the washing machine can't rotate and the treatment method 1. The drum of the washing machine can't rotate due to motor failure: If the washing machine can't dehydrate due to machine failure, you can try to open the back cover of the washing machine and move the pulley by hand. If there is no jamming. After the power supply is connected, the motor hums and does not rotate, indicating that the motor is short-circuited or damaged between turns, or the capacitor is not connected to the motor circuit. At this point, cut off the power supply, remove the motor belt and restart. If the motor still does not rotate or the speed is low, it is a motor fault and should be repaired or replaced.