Why is the excavator super flat?

if the excavator is ultra-flat, it will be leveled.

leveling method:

1. Use of bucket

When it comes to methods, we have to talk about the use of bucket first, because the excavator leveling operation is mainly carried out by contacting the material with the bucket. There are special buckets for leveling operation abroad, but they are also available in China, but they are rare. The principle is very simple, that is, the ordinary bucket is directly assembled with steel plates without teeth, but it is best to customize the widened bucket, which increases the leveling area and improves the leveling efficiency.

2. Scope of excavation

The scope of excavation also needs to be grasped flexibly. When leveling a large area, the scope of excavation can be maximized while meeting the leveling requirements. If the leveling quality requirements are high, it can be appropriately reduced to a suitable range. In addition, the traveling direction of the excavator should be "planned", and it is best to keep the excavator traveling in a straight line, so as to minimize the time spent on turning and the repeated work scope.

3. Choose a reasonable reference object

A reference object is often needed in slope leveling operation. An experienced driver can judge the leveling quality according to the reference object without stopping and getting off to observe, thus saving time.

4. Better line of sight

The excavator windshield will affect the operator's line of sight to a certain extent. It is recommended to pull up the front windshield and open the doors and windows to get a better line of sight without affecting the operation. If conditions permit, you can get off the bus and observe more, so as to know well and adjust the excavation plane in time. In addition, the height of the excavator platform will also affect the accuracy of operation. Most operations will require leveling while loading. At this time, the excavator platform should be lowered or improved to keep the excavator at a reasonable height without impressing the loading efficiency.

5. Use of accessories

Most small excavators are equipped with bulldozers, which can be used for "preliminary" leveling when leveling soft soil, and can also be used for "road repair", and then fine leveling, killing two birds with one stone.

The above are just some skills of leveling operation. How to really level the excavator still needs to keep a correct attitude and accumulate experience in actual work.