What should I do if the sink is moldy?

If the mildew is not serious, pour a little toilet cleaner or 84 disinfectant into the moldy place, and then dip a little daily detergent brush with a toothbrush later. You can also take a piece of cloth, soak it in 84 disinfectant and stick it on the moldy and black place of glass glue, and it will be found clean the next day.

2. White vinegar

Hair is often stuck in the sink of the sink, which is also one of the reasons why it smells bad. It's not enough just to clean your hair. We pour half a spoonful of salt into the sink, then half a cup of vinegar, and finally some boiling water. After a while, the sink can not only be dredged, but also become cleaner.

3, art knife

Scrape off the black moldy glass glue with a utility knife. After shoveling off the glass glue, you will find that the inside of the edge is still clean, but the glass glue is moldy. Take out the prepared glass glue. Squeeze out the glue in the glass glue along the edge, and then smooth the gap with your fingers.

4. Waterproof and mildew-proof adhesive tape

At home, when the sink is installed, it is usually fixed on the countertop with silica gel. After a long time, water stains will leak into the silica gel, leading to blackening or mildew. Waterproof and mildew-proof adhesive tape is attached to the joint between the sink and the countertop, which is moisture-proof and mildew-proof and easy to scrub. It can also be used at the joint of gas stove and countertop.

5, whitening repair agent

The sealing performance of the invention exceeds that of glass glue. The emphasis is on beauty and durability. Can effectively isolate the inside and outside, and can avoid odor leakage. Can be used for whitening toilets and pools in toilets, and can also be used for whitening all corners of kitchens and homes. Very practical.

6, glass glue mildew remover

The special glass glue mildew remover, that is, our mildew remover gel, is directly squeezed on it with the mildew remover gel, and nothing needs to be done, so let it stand. If it is a light mold, it will decompose in about 1 hour. However, for stubborn stains, especially in dark places, the dosage should be increased and it is recommended to leave them overnight and clean them many times.

7.bleach

Bleach is also a very good choice. Bleach will not damage the tape. You can cut the paper to the size of tape first. You can soak the paper with bleach, then stick it on the tape and leave it overnight. The next day, you can gently remove the mildew spots with a brush, but you must pay attention to dry them in time after being wet by water.