A weekly internship diary for the architectural major, from the first to the tenth week, must include the content and feelings of the internship, no less than 500 words, and a reward for high scores w

A weekly internship diary for the architectural major, from the first to the tenth week, must include the content and feelings of the internship, no less than 500 words, and a reward for high scores will be provided. If you write well, you will be rewarded

I will send you what I wrote

Internship Weekly Diary 1

The long-awaited fourth school year has finally arrived. I heard about it on the first day, so I was full of curiosity and longing for the internship. This internship was our first concrete contact with on-site things since we learned theoretical knowledge. It combined theoretical knowledge with practice and broke through the limitations in books. restrictions; at the same time, this internship is also a necessary test for our graduates before graduation, which is of great significance. This is the internship and my first internship in my life. I am filled with emotions. I am both excited and a little worried. In the blink of an eye, my one-and-a-half-year study career is coming to an end. As for me, no matter how reluctant I am, I still have to leave the campus and enter the society. Now that I think about it carefully, I learned very little in school. If I enter the society for an internship, I have to learn some knowledge, so I take the internship very seriously.

In the first week of internship, I didn’t do much in general, just getting familiar with the environment. When I first arrived at the internship workshop, I was still a little scared. After all, I was still relatively unfamiliar there. I thought about whether I was not very courageous and my communication skills were not very good, so I might not get along well with others. But then my scruples gradually disappeared. My master was also a man, a few years older than me. He was from the same place. He was also very nice. He said that everyone in the company was very nice. Those who are easy to get along with teach me to be bolder and communicate more with them when I have the opportunity. I think so. Internships are a good opportunity to train a person, and I can take advantage of this opportunity to train myself more. Thinking about spending the next six months with them, I feel indescribably excited.

In this internship, I mainly learned about circuits. I didn't learn much about routes in school. At the beginning, I mainly read some books about budgeting to understand some rules of routes and master the basic knowledge. For example, electric wrenches, squeezing, and tools.

You need to be very careful when learning to make a ruler. You may accidentally miss out on one size and another size, so you need to have endurance and be willing to endure hardships to learn these things. I I believe I can persevere.

The week passed quickly. I thought the internship days would be boring, but to be honest, the first week of internship was quite relaxed and enjoyable. Hehe, as the saying goes, everything is difficult at the beginning. I have already I have taken the first step, and I will continue to work hard in the coming days.

Life is not simple, we must move forward courageously! No matter how hard or tiring it is, I will persist. As long as I persist, there will always be a day when I smile. Although the first week of internship was uneventful and relatively relaxed, I did not relax. I will still keep a positive and optimistic attitude, work hard and integrate into the internship life with the greatest enthusiasm.

That’s about it for this week.

Internship Weekly Diary 2

Time flies, and the fulfilling week of internship life is over. I have slowly adapted to the new environment and gradually integrated into the work. I still gained a lot during the week, and it is necessary to summarize it after the internship. In the first week of the internship, I didn’t do anything specific. In the second week, I officially started to learn circuit maintenance and maintenance. Since I only learned some superficial things in school, it can be said that I basically don’t know how to do it. My plan is to learn the ruler first, I think it will be easier that way. Although there are many things to learn now, you can only take it step by step and learn one thing before learning another. If you act too hastily, you may not master anything in the end. My current goal is to work steadily and move forward step by step.

Nowadays, when making lines, we use a tape ruler to measure them, which tests people’s endurance. For example, there are many places to calculate for construction lines, so we cannot abandon them casually, and we must treat every place carefully. This week, the master gave me a ruler to use. I felt unable to start and felt a lot of pressure, but I had to accept this challenge.

After I made up my mind, I started working on it. I started with the straight lines first. There were some places that I had to look at several times before I could get them right. For some places that I didn't quite understand, I asked a master to do it. The day passed unknowingly. I was so tired after taking measurements for the first time. I deeply experienced the hard work. I found that life in school was quite comfortable, and I also had some thoughts in my mind. It took me a lot of time to read Daoqi. There are really many things I don’t understand. I feel that there are still many places where I need to learn more. Wait after the basic measurement is completed. I won’t go into the specifics one by one. The basic calculations are not difficult. The main thing is that you don’t know how to measure some complicated places. If you encounter something you don’t know, ask a teacher.

The second week was spent in a busy and fulfilling manner. During this period, I had some ideas in my mind and thought about the work I would do in the future. Although it is just an idea in my mind now, I I believe I will study harder with this idea.

Internship Weekly Diary 3

Time flies, and the two weeks of internship life passed quickly, and the third week of internship life began nervously and busy again. The first two weeks were mainly about learning about the ruler, so I decided to observe and study this week, which may be more helpful for mastering knowledge. The so-called practice is the only criterion for testing truth. I learned some specific construction knowledge, such as these Often I had some contact with it in school, but I didn’t quite understand it, and it was very important basic knowledge.

. Therefore, we must handle these incidents carefully during construction and handle them differently according to different situations. These issues should be paid attention to during construction. What kind of rubber pad should be used during construction and the amount should be paid attention to, as well as the early maintenance of the rails.

Through this week’s internship, although the knowledge gained is very small, the practical experience gained through the internship will benefit me throughout my life and will continue to be verified in my actual work after graduation. . I will continue to understand and appreciate the knowledge learned in practice. In my future work, I will continue to apply the theoretical knowledge and practical experience I have learned to practical work and strive to realize my self-worth.

Internship Weekly Diary 4

Time flies, and one month has passed quickly. This week's internship mainly focuses on learning about proficiency level knowledge. Whether a rail needs to be redirected or diverted mainly depends on whether its level and track gauge exceed the standard value.

There is actually a big difference between diversion and diversion. However, whether it is diversion or diversion, the relevant regulations should be strictly followed. If you do not follow the requirements and violate the relevant construction regulations, even if you change the road, it will be a violation of the regulations. Changes are in vain. Therefore, those in the construction industry must strictly carry out construction in accordance with relevant laws and regulations.

Internship Weekly Diary 5

See the Qingming Festival again. Qingming is a sentimental solar term (it rains heavily during the Qingming Festival, and pedestrians on the road want to die). Every time during the Qingming Festival, it is inevitable that there will be emotions in my heart. A little sentimental. During the Qingming Festival in China, everyone will go to sweep the tombs to pay homage to those relatives who have passed away. This year I am doing an internship in my hometown. This time I finally have time to go to the tombs. I didn’t have the opportunity before, either. I am studying in a different place or have classes at school, and there is no such thing as a 3-day holiday like now. So, this time I also went to visit the grave, and I really felt a lot of emotions when I came back from the visit. Having digressed, let’s get back to the point. It’s time to talk about internships.

To be honest, there is really nothing to write about the internship. The things I do every day are the same, just testing my level and so on. Now this season is mainly about taking down the board.

The internship time passed bit by bit, and I also grew up during the internship. I still have a long road ahead, and it requires constant hard work and struggle to truly go well. I firmly believe that the experience gained through this period of internship is valuable.

That’s it for this week. Next week I will talk about how the triangle pit is going.

Internship Weekly Diary 6

As for the bidding document for this project, I was mainly involved in the technical bidding part. Help draw construction schedules and construction site planning drawings.

Here I will mainly talk about what the technical standards of the project roughly include. I won’t go into details, but just give some general information.

The technical bid document mainly includes the following aspects:

1. Construction deployment and production preparation

Project overview: Project name:

Project location:

Construction unit: XX construction company

Project scale: construction area is approximately square meters

Structure type: frame structure

Construction period requirement: 210 days

Project category: Category III

Quality requirement: Qualified

2. Construction plan and technical measures

1) Construction process flow

Main construction sequence: erection of external scaffolding → tying of column steel bars → column formwork → beam and plate formwork → installation of beam and plate formwork → plate and beam steel bar tying → plate and beam Concrete pouring and curing → beam and plate formwork removal → decoration

2) Project construction measurement plan: This project uses a level for measurement and positioning, and construction stakeout is carried out according to the red line boundary pile points and relevant drawings provided by the owner. According to the site conditions and taking into account the complexity of cross-cutting operations of multiple types of work in future structural construction, technical review work should be carried out in a timely manner.

3. Quality management system and measures

1) To ensure that the construction quality of this project meets the requirements of the current quality inspection and assessment standards, we must effectively implement and implement building codes and standards, and strengthen project quality management. Standardize various management tasks.

2) Establish a project quality management system headed by the project manager, with project engineering and technical personnel as the main body, and with active cooperation from various professional departments.

3) At the same time, conscientiously and conscientiously accept the supervision and inspection of project quality implementation by project supervision units, government quality supervision agencies and all sectors of society.

4) Implement goal management, conduct goal decomposition, etc.

4. Safety management system and measures

The safety production goal of this project is to ensure that no major fires, explosions and major casualties occur, and the employee work-related injury rate is controlled at 2‰.

5. Environmental management system and measures

1) Environmental management system: Establish an environmental management leading group headed by the project manager, and the construction technical person in charge is

The deputy team leader is responsible for handling and coordinating the daily affairs of environmental management.

2) Environmental management measures: ①Construction noise prevention and control measures ②Water pollution prevention and control measures ③Air pollution prevention and control measures

④Solid waste prevention and control measures, etc.

6. Project schedule and safeguard measures

7. Materials, equipment supply plan and equipment plan

I won’t go into details about other things here. Okay, that’s about it for this week’s internship.

Internship Weekly Diary 7

Another week has passed. This week, I feel like there is nothing special to write. Here I will talk about what should be paid attention to during the construction of construction projects. Some issues:

1. Backfill soil

Material selection

1) Backfill soil: Priority should be given to using high-quality soil dug out from the foundation trench. The backfill soil shall not contain organic impurities, the particle size shall not be greater than 50mm, and the moisture content shall meet the compaction requirements.

2) Stone chips: should not contain organic impurities.

3) If there are no design requirements for the filling materials, they should comply with the following regulations: gravel, sand (when using fine or silty sand, the consent of the design unit should be obtained and the visa formalities must be completed) and blasting ballast; Can be used as filler below the surface. Clay soil with moisture content that meets compaction requirements can be used as filler for each layer.

4) Broken turf and clay soil with an organic content greater than 8 are only used for fill without compaction requirements. Silt and silty soil generally cannot be used as fill material, but in soft soil or swamp areas, if the moisture content meets the compaction requirements after treatment, it can be used for secondary parts of the fill.

5) Domestic garbage soil containing organic matter, peat soil in a flowing state, and clay soil with an organic matter content greater than 8 shall not be used as fill materials.

Avoid common project quality problems

1. The backfill soil should be sampled from each layer to measure the dry bulk density after compaction according to regulations. The upper layer can be backfilled if it meets the design.

2. Strictly control the thickness of each layer of backfill, and prohibit vehicles from unloading soil directly into the trench.

3. Strictly selecting the quality of backfill soil materials, controlling the moisture content, and the number of compaction passes are important links in preventing backfilling.

4. The lower part of the pipe trench, the corners of mechanical tamping and filling, and the walls and floors should be backfilled with fine-grained soil materials.

5. Filling construction should not be carried out on rainy days. If construction is necessary, it should be completed in sections as soon as possible, and fillers such as gravel soil, sand, and stone chips should be used. Rainproof and drainage measures should be taken at the site to prevent anyone from the ground from flowing into the pit.

6. After filling the roadbed, indoor platform, etc., there should be a period of natural settling before proceeding to the next construction step.

2. Post-pouring strip

Under normal circumstances, when the length of the masonry wall exceeds 40 to 60m, a through-post-pouring construction joint should be set up according to the specifications. When there is a building on the ground, the setting of the post-casting belt should be determined according to the requirements of the ground building, and the reserved width should be 800~1000mm. The post-cast belt should be poured with shrinkage-compensating concrete after the age of the concrete on both sides reaches 42 days. The mix ratio should be determined by testing, and the strength must be one grade higher than the concrete on both sides. Because the post-cast belt is left for a long time and accumulates a lot of construction waste and debris, special personnel must be arranged to clean it up. Before construction, chisel the concrete at the joints, rinse them with pressure water, keep them moist, and apply cement slurry. After the concrete is poured, it must be covered, watered and moistened, and the curing time shall be no less than 28 days.

3. Deformation joints

Deformation joints are set up to prevent cracks caused by concrete shrinkage or uneven settlement. Cracks caused by settlement are also called settlement joints. Settlement joints are generally provided at the connection between the entrance and exit of the civil air defense basement and the main structure, which are the main form of deformation joints in civil air defense projects. Due to differences in the excavation depth of the foundation pit and the bearing capacity of the foundation, the main body and outdoor entrances and exits suffered uneven settlement, resulting in the rubber waterstop tearing or the settlement gap being too large to repair. Therefore, construction should be carried out in strict accordance with construction specifications, and all buried waterstops should be inspected by dedicated personnel to ensure the construction quality of settlement joints.

The above are a few things that I feel I have a deeper understanding of this week. Through these few weeks of internship, I feel that I have grown up a lot. In addition to learning relevant professional knowledge, I have learned more. How to deal with groups working together. Deeply understand the importance of good interpersonal relationships everywhere.

Internship Weekly Diary 8

More than a month has passed unknowingly. In this more than a month, I have learned more or less knowledge. I also learned more about the lines. I just finished talking about the triangular pit last week, and now that it’s not high or low, I immediately went to see it. After reading the table, I also have a general understanding of the specific conditions of the high and low! The location is 107-107 Eight Hundred!

Calculate step by step, calculate everything first, and then have a plan. Which parts are track gauges and which parts are calculation levels? We all know the distinction in calculations. You can also find some new problems while slowly calculating. If you encounter something that you don’t know how to calculate, you can ask a teacher. It feels relatively easy to calculate a whole set of calculations. Although there are still mistakes, through the lessons learned from the mistakes, you can master the knowledge points. Have a deeper understanding and experience. As the saying goes, practice is the only criterion for testing truth, and it really makes sense, because if you don't practice, it will be difficult for you to discover your shortcomings and it will be difficult for you to make further improvements. Just like when we study, we need to calculate more and practice more, so that we can make progress.

During this more than a month, I slowly learned and accumulated knowledge. I also learned how to live during the internship and experienced all aspects of social life. After one and a half years of accumulation of theoretical knowledge, there must be a process of entering the field for practice, which is the combination of theory and practice. Especially for a discipline with very strong practical performance, such as lines, more emphasis must be placed on practical operations. Skill development. Moreover, this subject is largely different from books. In this internship, the theoretical knowledge we have mastered can be sublimated, and the best entry point between theory and practice can be found for my use. So there is an opportunity to integrate theory and practice. During the internship, we can get some skills that can only be obtained in practice, and lay a solid foundation for us to participate in hard work in the future. This is the purpose of this internship.

Internship Weekly Diary 9

It’s another week, and I feel that time flies by so fast. It has been nearly two months since my internship. It is already mid-May, which can be said to be summer, so the weather is getting hotter day by day. During the day, the temperature outside is frighteningly high, stuffy and hot, and the sun makes people sweat profusely. Fortunately, I think. I spend most of my time in the office and don’t have to go to construction sites very often. Thinking about how hard it is for those on construction sites, they have to brave high temperatures to work under the sun, and the environment of the work sheds they live in is not good. The temperature in summer It’s even more difficult to be that high. I really admire those who live on construction sites for many years.

Like now, the temperature is getting higher year by year, and the temperature changes are erratic. Sometimes I feel that summer is coming, and then it suddenly drops in temperature. This kind of weather can easily cause colds and the like. Yes, everyone should pay attention to their health!

After all, let’s turn the topic to what we learned this week.

After staying in the office for a long time, I seem to have developed a kind of inertia, and I have less time to go to the construction site. In the office, I often help the master prepare bid documents. After reading more, I feel that construction project bidding is really complicated. I also learned some relevant knowledge from the master, and also checked some information myself. This time I will talk about some bid evaluation methods for construction project bidding: such as the lowest bid winning bid method, the hundred-point bid evaluation method (also divided into A bid method, B bid method, A B value bid evaluation method), review method, no bottom bid evaluation method, etc. Here I will introduce the lowest bid winning bid method in detail. It is widely used, and other methods will not be explained in detail one by one.

The lowest bid winning bid method is a bid evaluation method commonly used in international bidding. The bidding procedures generally include: the owner publicly releases the bidding announcement and pre-qualification documents - the bidder submits the pre-qualification application document - the owner submits the pre-qualification application document to the approved bidder. Pre-qualified bidders issue invitations to bid - bidders submit their bids - bids are opened - the bidder with the lowest price wins. In China, all international bidding projects using World Bank loans generally adopt this bidding method, and domestic bidding projects using World Bank loans also mostly use this method.

The advantages of the lowest bid winning bid method are: ① It can reduce the project cost to the greatest extent and save construction investment; ② It conforms to the laws of market competition, survival of the fittest, and is more conducive to prompting construction enterprises to strengthen management, focus on technological progress and elimination Outdated technology; ③ It can minimize corruption in the bidding process, minimize human interference, and make the bidding process more open, fair and equitable;

However, it has also been exposed in domestic applications for several years Some problems arose: some state-owned construction companies blindly quoted prices regardless of cost in order to obtain projects. After winning the bid, the companies had to adjust additional quotations due to construction deadlines and other requirements. Therefore, the lowest-price bidding result violated the original intention of the bidding, and was later gradually used by other companies. replaced by several methods.

There are two main aspects of bidding techniques for lowest-price bidding: ①Construction enterprises start from technological innovation, internal potential tapping or the use of new technologies and new materials to reduce costs, etc. to minimize the quotation and strive to win the bid; ②Bidding When using unbalanced quotations, create opportunities for claims and strive for the maximum claim amount, and avoid blindly lowering prices and brewing bitter consequences.

Through work practice, we have also realized that: according to different bid evaluation methods, using different quotation techniques, combined with bidding experience, the use of artistry can take a more favorable advantage in the quotation, thereby improving the bid winning rate. Rate. Of course, the quotation advantage is only an important part of winning the bid. It is not enough to master the quotation skills. You also need to start from many factors such as construction organization design, construction period, quality, corporate reputation, corporate performance, corporate personnel, finance, equipment status, public relations, etc. Only through multi-faceted research, summary, and improvement can we maximize the bid winning rate.

Through internships, I come into contact with more things, and in turn, I learn more things. Practice can increase experience. I hope that if I continue to study, I can learn more useful knowledge.

Internship Weekly Diary 10

Let me make a digression at the beginning of this diary: (Today is May 12, 2010.) May 12, 2008, a memory Overshadowed days. Time cannot wash away memories, and we will never forget the sadness and concern. In the past two years, people in the disaster area wiped away their tears, suppressed their sorrow, turned their endless pain into infinite strength, and together with people across the country, built new homes brick by brick on the ruins. Today, two years later, the sad place where the mountains and rivers were broken in my memory has been reborn from the ashes and has undergone earth-shaking changes. Let us once again cherish the memory of those who have passed away with sadness

The digression is almost over, now let’s talk about the internship. In the previous weekly diary, we have talked about some precautions and practices for backfilling soil, post-pouring strips, etc. This time we will talk about the excavation of foundation pits (troughs).

The excavation of foundation pits (troughs) mainly includes the following contents:

1. Process flow:

Determine the excavation sequence and slope → divide into sections Excavate the layers evenly → trim the edges and clean the bottom

2. Operation technology

This project is an unsupported foundation pit (trough) and must be sloped. The steepest slope of the slope should be 33°.

1. Excavate the foundation pit (trough), reasonably determine the excavation sequence, route and excavation depth, and dig down evenly in sections and layers.

2. When the excavator moves along the edge of the excavation, the width of the machine from the upper edge of the slope shall not be less than 1/2 of the depth of the foundation pit (trough) and pipe trench.

3. During the excavation process, the status of the trench wall and slope should be checked at any time. Protective preparations should be made to prevent collapse.

4. The foundation pit (trough) shall not be excavated below the design elevation.

5. The earth that cannot be dug during mechanical construction should be excavated manually at any time, and the earth should be transported to the place dug by the machine with a wheelbarrow so that it can be excavated in time.

6. Repair gangs and clean up the bottom. Find the horizontal line at the groove edge 50cm away from the designed elevation of the groove bottom, nail small wooden pegs, and manually dig away the temporary soil layer. At the same time, the axes (center lines) at both ends are used to guide the piles and pull through the wire (use small wires or lead wires), check the distance from the groove edge, and determine the groove width standard. Use this to trim the edge of the trench, and finally remove the earth at the bottom of the trench. After the tank bottom is repaired and leveled, quality inspection and acceptance will be carried out.

7. Due to the requirement of excavation of concrete cast-in-place piles, the earth stored on site should be properly stacked. When the site has conditions for stacking, leave enough good soil for backfilling; excess soil should be transported away at once to avoid secondary transportation.

3. Quality standards

The soil quality of the foundation pit (foundation trench) and the site must meet the design requirements, and disturbance is strictly prohibited.

4. Quality issues that should be paid attention to when excavation of foundation pits (troughs):

(1) Base over-excavation: excavation of foundation pits (troughs) must not exceed the base elevation.

(2) The base is not protected: Disturbance to the base soil should be minimized after excavation of the foundation pit (trough).

(3) The excavation size is insufficient and the slope is too steep: the excavation width and slope at the bottom of the foundation pit (trough) should not only consider the structural size requirements, but also increase the working surface width according to construction needs.

(4) The construction sequence is unreasonable: Earth excavation should be carried out strictly in accordance with the construction sequence stipulated in the construction plan. It should be noted that the excavation should be from the lower part first, and then proceed in layers and sections to form a certain slope. , to facilitate drainage.

Another week has passed, and we must work harder in the following days.

Internship Weekly Diary 11

May has almost passed again, time really flies by, it feels like the internship has not been long, and now it is less than half a month until the end of the internship It's time. In the past few weeks, I mainly introduced the content of construction project bidding. This week I will talk about something else. In addition to learning the production of bid documents with the master in the office, when I have free time, I will go to the reference room to read some information, and I will also talk to the construction workers. Xiao Xu went to the construction site and asked questions he didn't understand when he encountered them while watching. Let’s talk about steel bar sampling here. I have never been exposed to steel bar sampling before.

The data clerk Lao Lin told me that when the steel bars come into the site, the raw materials must be sampled. Sampling is carried out according to different types, specifications and quantities of steel bars. Take two sets for 60T and above, and take one set for less than 60T. Four roots form a group.

Before the steel bars are tied, the steel bar welding must also be sampled. When single-sided lap welding is used for beams and plates, samples are taken in groups of 3. When the columns are electroslag pressure welded, samples are taken in groups of three. When flash butt welding is used for beams and plates, samples are taken in groups of 6. When sampling steel bar welding, a group of more than 200 joints should be taken.

During concrete construction, the main control item is that the strength grade of structural concrete must meet the design requirements. Test specimens used to check the strength of concrete for structural components should be randomly selected at the concrete pouring site. The sampling and test specimen settings should comply with the following regulations:

Every time 100 plates are mixed and no more than 100 cubic meters are mixed, Concrete with a mix ratio must be sampled no less than once

When less than 100 trays of concrete with the same mix ratio are mixed in each working shift, sampling must be done no less than once

When continuous pouring exceeds 100 cubic meters, concrete with the same mix ratio must be sampled no less than once per 200 cubic meters

For each floor, concrete with the same mix ratio must be sampled no less than once

Sampling each time At least one set of standard curing specimens should be retained, and the number of retained sets of specimens cured under the same conditions

should be determined based on actual needs.

Inspection method: Check construction records and specimen strength test reports.

At the connection between the masonry infill wall and the column or concrete wall, tie bars of 2Ф6@≤500 should be set along the height direction. The length of the tie bars extending into the wall should not be less than 1/ of the wall length. 5 and should not be less than 700.

In addition to going to the construction site to observe, in the office, the technical person in charge introduced me to the "Complete Collection of Current Construction Quality and Safety Management Regulations." I feel that although I learned a lot of knowledge in school, it is not comprehensive enough. There are many things mentioned that you only know where to use them after you come into contact with them. For example, the sampling of concrete structure specimens mentioned above can be found in the construction quality acceptance specifications for concrete structure projects. The construction worker then calculates and determines the number of production groups based on the actual conditions on site.

Constructor Xiao Xu told me that the standards they are most exposed to are the "Construction Quality Acceptance Code for Building Foundation Foundation Projects" GB50202-2002, "Masonry Engineering Construction Quality Acceptance Code" GB5-203-2002, "Concrete Structure Engineering Construction Quality Acceptance Code" GB50204-2002, "Roofing Engineering Quality Acceptance Code" GB50207-2002, "Building Ground Engineering Construction Quality Acceptance Code" GB50209-2002, "Building Decoration and Renovation Engineering Construction Quality Acceptance Code" GB50210-2001 , "Technical Standard for On-site Inspection of Masonry Projects" GB/T50315-2000, etc. The other is the "Construction Quality Acceptance Code for Construction Projects" GB50300-2001.

A week has passed, learning in internship and growing in learning. Through this week's internship, I have some understanding of steel bar sampling and inspection, and I feel that I have gained something.

The internship is mainly for us to improve our work and business capabilities in the future, enhance our future competitiveness, and add a cornerstone for us to gain a foothold in the future.

The internship has enriched my knowledge in the architectural profession, enabled me to move to a deeper level, and will have a certain role in promoting my foothold in the future society, but I also realize that in order to do a good job For work in this area, just two or three months of internship is not enough. It also requires me to accumulate bit by bit in my daily study and work and continuously enrich my experience.

Internship Weekly Diary? 12

In the blink of an eye, the three-month internship life is coming to an end. Soon another week has passed. This week I mainly focus on Let me share some of my thoughts on construction technology and construction safety, construction quality and management:

Continuous improvement of construction technology is the constant melody of sustainable development of engineering construction, and construction safety is the eternal theme of engineering construction. . With the deepening of reform and opening up, economic construction has entered the fast lane and continues to increase its speed. As the country continues to build a moderately prosperous society, the speed and scale of urbanization are increasing day by day. Whether in cities or rural areas, construction sites are lined up in rows, high-rise buildings are rising from the ground, and old cities have changed their appearance. People are interested in modern times. The pursuit of beauty, comfort and multi-functionality of buildings is constantly being upgraded, and construction technology is rapidly improving with the height of the building. At the same time, many new problems have arisen, the most important of which is construction safety. Safety issues run through the entire project construction process. From construction to putting into use, safety concerns the hearts of builders and users all the time.

The development of construction technology represents the development level of a country's construction industry. The development direction of "economically reasonable and technologically advanced" is the representative of whether a country's construction industry is developed. There are many prerequisites for improving construction technology, such as economic strength, quality of construction personnel, level of construction machinery, construction site management capabilities and many other factors.

The factors that affect construction safety are complicated. In addition to the mutual interference and influence of many factors in the project construction itself, the technical issues of the project, the quality of materials, the economic issues of the project, etc. are all restricted from different levels. Building security. Engineering safety is not only an engineering technical issue, but also a social and economic issue. It is closely related to people's lives and involves the development of social economy and the progress of human society. Therefore, in every aspect of construction engineering design and construction, while pursuing economic and social benefits, we must remember: safety is the eternal theme of engineering construction!

In terms of construction safety, the national and local competent authorities are strict. In addition to financial penalties, all relevant personnel such as the construction project management department, construction units, and supervision units who have personal casualties will be punished. Administrative penalties. However, unforeseen disasters still occur, such as the death of a crane worker due to improper operation; during the lifting process at a construction site, a hanging object fell and hit a construction worker who was operating a mixer on the head, causing him to die on the spot. These shocking examples once again illustrate that construction safety is more important than Mount Taishan.

Construction quality and management are in a complementary relationship. The two restrict and promote each other. There must be strict management so that quality can be guaranteed. In turn, good quality must be accompanied by a set of strict management systems to take care of each other. "Construction Project Quality Acceptance Code" GB50300-2002 has made detailed provisions on the quality of construction projects, and every construction unit uses it as the standard for construction quality evaluation.

Through the internship, I learned more about the development level and current situation of Chinese architecture. The internship is a mirror that can reflect the results of my study; the construction company that carries out the construction is a mirror that reflects the strength of the company; the local construction level is a mirror that reflects the current development status of China's construction industry ; The development of China's construction industry is a mirror that can reflect China's development position in the construction industry of various countries around the world. I am very happy to have such an internship and learning opportunity.

I have to admit that in the more than three months since I started my internship at school, I have learned more things that I have never been exposed to. At the same time, I also feel that I am slowly growing and absorbing more. I slowly began to apply the knowledge I learned along the way to practice in my major, and began to accumulate experience step by step. When I started working, I felt that I should be grateful for the teacher’s cultivation. After internship, I felt that I should be grateful for the guidance and help of the master. On the next road, I will walk hard, step by step, study and practice hard, constantly improve myself, live a good life, and grow well.