Teach you how to take off the license plate quickly in 3 seconds and how to take off the buckle cover of the car license plate.

Generally, the license plate will not be removed at will after it is installed, but the owner may need to remove the license plate for some reasons, but we all know that the screws on the license plate have anti-theft buttons, so how should the license plate cover be removed? Let's tell you in detail how to take off the anti-theft buckle of the license plate.

How to remove the car license plate cover?

1. Remove the license plate screw with a flat screwdriver, a cross screwdriver and an angle grinder;

2. Plug in the power supply of the angle grinder, then hold the handle of the angle grinder with both hands, turn on the switch of the angle grinder with the right hand, and cut the nut on the license plate with the angle grinder. Note: Be sure to cut steadily to avoid damaging the license plate. There are 8 nuts. Cut a straight mouth one by one with an angle grinder.

3. Insert a screwdriver into the straight mouth of the nut cut by the angle grinder, and then pry the nut open;

4. After removing the nut, you can unscrew the screw that fixes the license plate with a Phillips screwdriver. Twist it carefully and slowly to avoid slipping.

5. If you don't have the owner of the angle grinder, you can try to firmly clamp the screw ring with the needle-nosed pliers or duckbill pliers, and loosen the pliers after the screw ring is deformed;

6. Then insert the screwdriver into the deformed place and remove the cover of the nut by inertia.

Should I install my own license plate or go to the DMV?

When the license plate arrives, you can choose to install it yourself or in a 4S shop. Generally, people who go to the traffic control office to install the license plate are those who go directly to the traffic control office to get the license plate. In fact, it is not difficult for the owner to install the license plate himself, as long as he can install it with a screwdriver, and there is no need to go to the 4S shop specially. If you think your installation is troublesome, you can choose to apply for a license in 4S, because you have already paid the license fee when you buy a car, so when you ask the 4S shop to apply for a license for you, they will not refuse you.