5 universal version student training summaries

In terms of content, the training includes hands-on skills training and mental skills training; including comprehensive quality requirements (entrepreneurship and employability abilities are collectively referred to as cross-job abilities) training. The following is a summary of the universal version of student training that I have brought to you. I hope it can help you!

Universal version of student training summary 1

Through this practical training, and under the careful guidance of Teacher Hong, I cannot say that I am very proficient in the use of common drawing commands and editing commands of Auto CAD, but it has been greatly improved compared to before the practical training. What is more obvious is that it is faster. The same type of pictures can be completed in less time, and the quality is only high. But the most skillful thing is the basic settings, such as layers, line types, line widths, proportions, colors, text styles, dimensions, etc. In order to strengthen the practice in this area, I draw the picture frame for each picture and set the layer, line type, line width, color, text style and label style. There are various labeling styles for geometric figures. In particular, I learned how to set some diameter and radius labels. The difference from the conventional ones is that I have never been exposed to them before in the practical training.

After two weeks of drawing training, I learned that CAD is a widely used technical application software, which is particularly important in machinery, construction and other industries. Computer-aided drawing has many outstanding advantages over manual drawing. The advantage is that it far exceeds manual drawing in terms of precision, accuracy and beauty. What we are learning now is mechanical knowledge. After entering the society in the future, most students will be engaged in the mechanical industry. Therefore, mechanical drawing is the most basic course for us. Learning this skill well will be beneficial to us in the future. The work is very practical. Of course, if it is just hand-drawing, it may have an impact on the construction. In comparison, CAD computer drawing is very accurate, and it is also very convenient and fast to draw.

Through this training, I also found that I still have many shortcomings. For example, line types, line widths, and color sizes are sometimes confused. I am not very skilled in setting text styles and annotation styles. Line type selection is incorrect. I corrected all the above mistakes one by one under the correct guidance of Teacher Hong. But I'm still not very familiar with mechanical drawing. Therefore, in the future we will continue to work hard to learn drawing skills and strive to make greater progress in this aspect. This practical training not only allowed me to master the use of Auto CAD, but also made me suddenly realize that although some problems require my own thinking, the ability to think by myself is indispensable and allows me to solve problems independently. The teacher's guidance is also indispensable. When you encounter problems that cannot be solved, you should not be too paranoid. At critical times, you should still carry forward the style of asking questions. I learned these two points during the CAD training, which is also a big gain for me. . Finally, thank you, Mr. Hong, for your hard work!

Universal Edition Student Training Summary 2

I gained a lot through this training. The following is a summary of my practical training.

In addition to learning a lot of new knowledge during the practical training, I also exercised my ability to do projects and improved my ability to think independently and operate by myself. The project work during the practical training also made me more team spirit.

1. Continue to learn and enrich yourself.

In addition to learning a lot of new knowledge during the practical training, I also learned about HTML5, gained a new understanding of Internet+, and also had an additional choice for the direction of future work.

2. Practice hard and constantly improve yourself.

Only by putting theory into practice can the value of theory itself be realized, and only by putting theory into practice can theory be tested. Similarly, a person's value is also realized through practical activities, and only through practice can one's quality be tempered and one's will manifested. This time I completed four projects during the practical training with the teacher, and completed a small project independently with my friends. I am full of excitement and will work harder in the future.

3. Improve the summary and continuously educate yourself.

During the practical training, what is shown in front of you is a fertile soil for you to ride on, cultivate your dreams, and achieve your future. I will continue to learn, practice in depth, constantly improve myself, reflect more, summarize more, learn from experience, and lay a foundation for the future.

It can be said that this practical training not only enabled me to learn knowledge and enriched my experience; it will also help me better adapt to future work. Finally, I would like to thank the college for organizing this very meaningful practical training, which enabled us to learn a lot and understand a lot.

Universal Edition Student Training Summary 3

This internship, in addition to giving me a certain understanding of the basic business of commercial enterprises and being able to perform basic operations, I feel that I am The gains in other aspects are also quite great. As a person who has always lived in a simple university school, this internship has undoubtedly become a platform for me to enter the society and laid the foundation for me to enter the society in the future.

First of all, I think a big difference between school and work is that you must have a strong sense of responsibility after entering society. In our jobs, we must have a strong sense of responsibility, be responsible for our positions, and be responsible for the business we handle. If the work that should be completed that day is not completed, the employee must work overtime; if a mistake is made due to carelessness, the employee must be responsible for correcting it.

Secondly, I think everyone must stick to their professional ethics and strive to improve their professional quality after working. As the saying goes, to work in a profession, you must understand the rules of the profession. I have a deep understanding of this from my colleagues in the internship unit. For example, some transactions require work ID. Although the other party may be someone they know, they will still ask the other party to show their ID. When the other party complains, they will always patiently explain why they must do this. Nowadays, commercial enterprises have been included in formalized management, so the work attitude of employees is particularly important. I have personal experience of this.

In the end, I feel that in actual work, academic qualifications are not the most important. The main thing is personal business ability and communication ability. Anyone can do any job after doing it for a long time. It is more important to practice skills in actual work.

Therefore, I realized that if we combine the knowledge we have learned in college with more practice and use practice to test the truth, an undergraduate will have a strong ability to handle basic practical matters. Ability and comparative systematic professional knowledge, this is the real purpose of our internship.

I am very grateful to the internship unit for giving me such a good internship opportunity, which allowed me to learn a lot, grow a lot, and gain a lot.

Universal Edition Student Training Summary 4

Electronic technology internship is a very technical basic course. It is also a way for our science and engineering department to conduct engineering training, learn process knowledge, and improve overall quality. important practical link. This internship will be conducted for four hours at noon every Tuesday from the 2nd to the 5th week.

The internship task was to make a multimeter. At the beginning, I didn’t know what exactly the electronic technology internship was going to do. I thought it would be like doing this and that in the previous metalworking internship. Later I learned that I was making a multimeter by myself, and that I could take the finished product back home. It sounds really funny, and it should be fun to do! In this way, I started this internship journey with great interest and a playful attitude.

On the first day of the internship, which is also the second week, I was envious of the scope and technology of the electronic technology internship in the video, as well as the climax of the teacher's skills in the video. This afternoon, I learned about electronic technology The internship gave me a preliminary understanding of circuit boards and circuit components, and gave me necessary guidance for the three-week practical operation of the next class.

The third week is not about learning production, but doing some basic work exercises, practicing how to use a soldering iron to solder resistors and wires. The soldering iron is new to me, so I took the opportunity to practice seriously.

Let me talk about the welding process. First insert the prepared components into the specified position on the printed circuit board. After the electric soldering iron is heated, use the edge of the soldering iron tip to apply an appropriate amount of solder. The amount of solder applied depends on the size of the solder joint.

When welding, the blade of the soldering iron tip should be brought into contact with the solder joint and the component lead, and the necessary movement should be made according to the shape of the solder joint, so that the flowing solder can cover the solder joint and penetrate into the gaps of the object to be soldered. The contact time is about 3-5 seconds, and then remove the soldering iron. The time, direction and speed of removing the soldering iron determine the quality and appearance of the welding. The correct method is to quickly bring the soldering iron back when you are about to leave the soldering point, and then quickly leave the soldering point, so that the soldering The solder joints are bright, smooth and burr-free.

When welding, the welding time should not be too long to avoid burning the components, but it should not be too short to cause false or weak soldering. After welding, use tweezers to hold the component to be welded and pull it out with appropriate force to check whether the component is firmly welded. If looseness is found, welding must be performed again.

Welding seems very simple, but there are many skills that need to be paid attention to. For example, the strength of pinching the wire with offset pliers, the amount of solder wire, and the time during the welding process must be grasped accurately. More or less won’t work! I think the most difficult thing is soldering. I can’t always control the amount of solder wire and the time of soldering iron support. I thought it was a good practice, otherwise I wouldn’t know how many original parts would be damaged by welding.

In the fourth and fifth weeks, we started welding our final multimeter. I was a little excited when I thought that the multimeter we usually used in the physics laboratory could now be welded by our own hands.

In the first week of school, we ushered in the first class of the new semester-electronic technology training class. I can’t wait for the new courses and new knowledge in the new semester.

In this semester, we first came into contact with a preliminary understanding of electronic components, as well as the structure and layout of circuits. The most important thing in this practical training class is the electric welding seen in daily life. In class, the teacher guided us on the use of electric welding. Because during the welding process, heated electric welding is relatively dangerous. If used improperly, it may cause harm to ourselves or others. Therefore, we must use electric welding in strict accordance with relevant regulations and correct usage methods to avoid burn accidents.

After we have initially mastered the soldering methods of electronic components, we can start to try to solder some circuit board components. The layout of electronic components is very important. Because it is associated with the convenience and simplicity of circuit connections.

A short week has passed. During this week, without the guidance of the teacher, our practical training will have a big failure, and the practical training class will not be completed. Secondly, in this practical During the training, I understood that cooperation and communication with peers is very important. Team spirit should be kept in mind. Isn’t it a perfect thing to share the joy of success with people of the same sex?

The practical training class has come to an end. Through this time, we have gained a lot of precious knowledge, and this has nothing to do with the teacher’s Hard work is indispensable. Here, all the classmates and I would like to say thank you to the teacher! Thank you for your hard work, teacher!

Universal Edition Student Training Summary 5

We entered_ on March 7, 20__ _Training Company I participated in the software development training. In this training, in addition to understanding the skills, qualities, and knowledge required in my work, more importantly, I learned how to complete a task and how to enjoy my work. When you encounter a problem, calm down and find ways to eliminate obstacles bit by bit until you finally succeed. A kind of self-confidence will naturally arise. This should be the joy of work. Sometimes you need to ask others if you don’t understand. Ask with an open mind. You can really learn things from others that you don’t have. Every setback will bring me closer to success. I also learned to cooperate and communicate with others at work, enjoy and suffer together, and cooperate and help each other. This is the spirit of the group and something that must be learned.

After studying in school before, I have a certain knowledge and understanding of programming. While in school, I always studied theoretical knowledge and had no opportunity to participate in project development. So to be honest, before the practical training, software project development was relatively abstract to me. It was not very clear how to divide the labor for a complete project and the steps required to complete the project. After this practical training, I understood that the development of a complete project must be carried out by a team with division of labor and cooperation, and necessary summary and demonstration must be made at each stage.

The stages that a complete project must go through include: vision scope planning and use case description, project structure and risk assessment, business function specification, detailed design specification, code implementation, testing and installation package, etc. The development of a project requires a lot of financial resources and manpower. Without a good long-term plan, it will have a great impact on the future development progress. It may even happen that the project cannot be completed within the scheduled time or the completed project cannot be completed within the scheduled time. It was different than originally expected.

A good project structure, business functions and detailed design instructions have a clear guiding role in the development of a project. It can enable developers to have a clearer understanding of the functions to be achieved by the project as a whole, and can also reduce the need for development work. Unnecessary troubles arise during the process. The implementation of the code is the key to the success of a project development. In other words, the preliminary work is preparation for the implementation of the code.

I deeply realize that it is not easy to become an excellent software developer. Not only must you have enough motivation and enthusiasm, but you must also have a solid foundation in writing code. You must have something to do First, prepare the reliability report, functional specification, detailed design specification, etc. and some risk assessment skills for the documents.

In addition to the library, the thing that makes me feel most at the university is the training computer room. In the past two months, I went back and forth between the training computer room and the dormitory, which made me enjoy A fulfilling period of study made me feel the charm of the university, have full confidence in myself and the university, and meet the challenges of tomorrow with an enterprising attitude.

Practical training requires solid basic theoretical knowledge, so that the operation can be done smoothly. Only then did I understand what "the book is useful only when it is used". This stimulates the desire to learn.

"Putting what you have learned into practice" means applying the learned knowledge into actual operations and using practice to test the correctness of the knowledge. I think this is the most fundamental purpose of practical training.

"What you learn on paper is ultimately shallow, but you know that you have to do it!" During the short practical training process, I deeply felt my lack of professional knowledge in practical application. I used to think that what I learned was pretty good, but once I applied it to practice, it was completely different. Only then did I truly realize the meaning of "endless learning."

After two months of practical training in e-government service platform system development, I have a deeper understanding of the Visual2005 software development platform, and my understanding and use of Microsoft basic class libraries have also been greatly improved. . And how to use SQL Server database for connection operations has been substantially improved.

The short practical training is over, which has laid a good foundation for my future employment and improved my software development level. In the future, I will study harder and continuously improve my own quality. Pioneering and innovative, keeping pace with the times, and becoming an excellent software development engineer.

Universal version of student training summary 5 related articles:

★ Universal version of college student internship summary report template

★ Ten universal version of practical training summary

★ Universal template for student training summary

★ Five latest personal training summary

★ Five general internship report summaries for senior students

★ 5 Internship Summary for Universal College Students

★ 5 General Internship Summary for College Students

★ 5 Work Summary of Universal Internship in 2022

★ Intern Work Summary 5 universal templates

★ General version of practical training experience