How to modify the gas flue? Gas flue modification tips

Renovation is really a complex and large-scale matter, so it can easily lead to various problems during the whole process. If it is just a small and insignificant problem, it would be easy to solve, but If it involves some renovation problems of hidden projects, it will be more serious. Not only does it affect the comfort of life after moving in, but it may also cause serious safety hazards and directly affect the safety of your family. Today we will talk to you about several aspects that require special attention when renovating gas flues.

Gas flue modification tips:

1. When the gas hose passes through the stove, be sure to reserve an inlet as needed. The hose connected to the stove or water heater must be controlled within 2 meters and must not pass under the cabinet. At the same time, it is strictly prohibited for gas hoses to pass through doors, windows, walls and ceilings, and vents must be installed on the cabinet doors under the stove to ensure smooth ventilation.

2. Remember that natural gas pipelines cannot be close to sources of fire and heat. Because natural gas itself is flammable, in case the natural gas in the pipeline explodes due to overheating, or a fire is likely to occur when a leak occurs in the pipeline. The correct approach is to place the natural gas pipeline against the lower end of the wall.

3. The interface of natural gas pipelines must be sealed. Because the gas itself is pervasive and easy to leak, the interface of the natural gas pipeline must use special sealing treatment.

4. There should be no power plugs, light or dark wires, power sockets, or switches around gas pipes, gas meters, gas valves, and pipe interfaces. Even if there is a distance from the pipe, it must be kept above 15cm, and The horizontal distance between gas appliances and gas facilities must not be less than 30cm.

6. Gas meters, water heaters and other gas equipment cannot be wrapped. Gas water heaters must be installed in special flues and cannot be installed in bathrooms. Even if the original structure of the house needs to be changed, gas facilities must not be installed in bedrooms, bathrooms or other unsuitable places. They must be installed in designated locations.

In addition, for the renovation of traditional flues in old buildings, installing a valve at the smoke inlet of the flue is a good way to solve the problem of odor. This kind of valve is one-way. When the range hood is working, the valve opens into the flue. When other residents discharge smoke into the flue, the valve will be tightly closed to prevent the smoke from pouring back into the flue opening, effectively solving the problem of " "Odor transfer" problem

The above is the relevant introduction to the gas flue modification that we have brought to you. We hope it can bring you some help. I wonder if you are satisfied with the editor's introduction?